Twist drill bits

Diameter : 0.3 mm - 10 mm
Length: 40 mm - 80 mm

... series of economical, high-performance small drills. It has two built-in ducts that are used for supplying the coolant straight to the spot of requirement, directly up to the cutting edge of the drill. ...

Diameter : 0.4 mm - 6 mm
Length: 46.5 mm - 80 mm

The CrazyDrill Pilot from Mikron is mainly used for centering and drilling of pilot holes up to 2 x Ø in one operation that ensures high tolerance. Also, it is suitable for drilling deep holes over 6 ...

Diameter : 0.3 mm - 2 mm

... and a digressive helical flute. As pilot drill it is the ideal complement of the twist drill types CrazyDrill SST-Inox and CrazyDrill Flex SST-Inox and it is suitable as well for short ...

DA110 Perform HSS drill – cost-effective in all materials. Can be used universally with various different materials Tip geometry for optimum centring accuracy Maximum accuracy on the component thanks to precision-ground surfaces

Walter Titex DC170: The Ikon of drilling – visibly different, clearly leading the way. ​ Solid carbide high-performance drill with internal cooling for ISO material groups P and K 50% longer tool life ...

Diameter : 0 mm - 2 mm

Precision down to the smallest detail. ​ Solid carbide micro twist drill for ISO material groups P, K and N Extremely high level of process reliability for the smallest of dimensions Excellent surface ...

Diameter : 10 mm - 20.5 mm
Length: 56.6 mm - 169.5 mm

... cutting, carbide drill heads, even those found in machines, is simplified using the KOMET KUB K2™ replaceable head drill. This device offers customers both affordability and flexibility. Self-clamping ...

Diameter : 14 mm - 65 mm
Length: 63 mm - 139 mm

The KUB Quatron® is a solid drilling tool manufactured by Komet. Its key features include drilling depths of 2xD, 3xD and 4xD, a diameter ranging between 14.0 to 65.0 mm, higher cutting ...

Diameter : 33 mm - 45 mm
Length: 94 mm - 125 mm

... solid drilling up to 5xD even in the midst of paramount machining implementations. It supplies up to 20% more cutting and feed speeds in comparison to conventional solid drills. It is suitable for diameter ...

This AMECA hand-operated installation tool drilling bit is the ideal unit to use with applications that require a commercially-available standard drill bit. All AMECA ...

Diameter : 10 mm - 26 mm

... eliminates large stock of drills than braised drills. A cost-effective solution since it produces more holes and reduce downtimes with its easy and fast changing drill. These are built ...

Diameter : 2 mm - 20 mm
Length: 78 mm - 225 mm

The WDO Drill series, created by OSG Europe, is a drilling tool that features variety of models for different applications. It is composed of Carbide drills 3D, 5D, 10D, 15D, 20D and ...

Diameter : 5 mm - 18.5 mm
Length: 80 mm - 217 mm

The OSG TRS-HO-3D/-5D/-10D are high precision carbide drills with equipped with three flutes for maximum efficiency. The carbide drills are designed for efficiently processing steel and cast iron materials ...

Diameter : 4 mm - 8 mm

The manufacture of faster aircraft with a longer range that are more environmentally progressive and require lower operating costs is the mission of the Aerospace Industry. OSG shares the same mission with regard to their cutting tools. The ...

RUKO ULTIMATECUT Step drill - Unique in every step. + 5 in 1 tool + Up to 75% time savings + Ultimate flexibility ULTIMATECUT Step drills HSS RUnaTEC, spiral fluted with turbo tip The ULTIMATECUT ...

Twist drill DIN 338 type N, HSS-G with TiN-coated bits High-performance ground standard twist drill made from heavy-duty high speed steel. The ...

Diameter : 1 mm - 16 mm
Length: 34 mm - 178 mm

... Präzisionswerkzeuge offers curved drill bit or straight shank, that is made from robust high speed steel. The steel material has a reinforced drill core and parabolic flute, which ensures optimized chip ...

Specially made for the machining of austenitic stainless steels, the twist drills EF-Drill-VA are available in the designs acc. DIN 6537 short (3 x D) and long (5 x D).

Upon request, with respect to our drill design EF-Drill C-STEEL, a chamfer drill type EF-Drill C-VA is also available; this one as with our twist drill ...

EF-Drill the new solid carbide c of EMUGE is the result of extensive development work. The very latest findings regarding tool geometry, cutting material and coatings went into this tool. The drill ...

With WhizDrill we have put together a range of micro drills that start at 0,1 mm and go up to 3 mm. These can be ordered to any geometry and shank sizes in stock are 1,00 mm, 1,50 mm, 2,00 mm, 2,50 mm, 3,00 mm, 1/8 and ...

Diameter : 0.2 mm - 3 mm
Length: 25 mm - 42 mm

With WhizDrill we have put together a range of micro drills that start at 0,1 mm and go up to 3 mm. These can be ordered to any geometry and shank sizes in stock are 1,00 mm, 1,50 mm, 2,00 mm, 2,50 mm, 3,00 mm, 1/8’ and ...

Style C | Carbide 3-Flute Twist drill with reinforced shank

Diameter : 1 mm - 20 mm

The solid carbide spiral drill from Arno-Werkzeuge features a fast chip evacuation, as well as an efficient chip breaking property. This is due to the cutting edges in point and chip breakers on leading edges. The drill ...

Diameter : 14 mm - 32 mm
Length: 104.5 mm - 352.99 mm

... is designed with lasered spare part numbers placed on the tool shank, which gives easy identification. The Shark Drill² is an updated drill point specifically designed for centering holes.

Diameter : 9.5 mm - 114 mm
Length: 91.9 mm - 1,003.6 mm

All holders with coolant through Nickel plated drill body Smooth swarf chambers for better chip flow Spiral or straight flute available Torx® - Screws for easy and secure locking Tool selection Drilling ...

Diameter : 5 mm - 11.49 mm
Length: 5.5 mm - 23 mm

The VEX-S provides drilling, and front & back chamfering in a single process. The machine utilizes a twist drill functions, and a SNAP chamfering system. As a result, the equipment reduces process time, ...

Diameter : 0.8 mm - 4 mm
Length: 31.5 mm - 56 mm

Diameter : 0.1 mm - 2 mm
Length: 30 mm - 43 mm

Diameter : 1 mm - 14 mm
Length: 34 mm - 160 mm

Diameter : 1 mm - 12 mm
Length: 34 mm - 151 mm

A new high speed cobalt (HSS-E) jobber drill has been launched by Dormer. The A147 is primarily for machining stainless steel and titanium. Capable of drilling to depths up to 6xD, the Bright ...

Diameter : 5, 6, 8, 10 mm
Length: 62 mm - 89 mm

VN4022 Point shape - form E. Material HSS Co5. Very high performance high speed steel with good toughness for milling cutters and for milling of materials up to the strength of 1200 MPa. Lead of helix 25° - 30°. VN40090 Point ...

Diameter : 5, 6, 8, 10 mm
Length: 62 mm - 89 mm

Point shape - form E. Material HSS Co5. Very high performance high speed steel with good toughness for milling cutters and for milling of materials up to the strength of 1200 MPa. Lead of helix 25° - 30°.

Diameter : 3 mm - 50 mm
Length: 50 mm

Tool modification - Sharpening modification according to, DIN 1412 Notes - The sharpening at 180° has two sharp levels in the middle; - Possible shape are: standard, flat, avyac and A, B, C, D, E, and U; - The rake angle b is ...

Diameter : 3 mm - 50 mm
Length: 50 mm

Tool modification - Reduction of the diameter; Notes - The total length and flute length are the same of fhe bigger diameter; - Cylindrical flange back off and sharpening can be white unless coated; Required parameters - Item ...

Diameter : 3 mm - 50 mm
Length: 50 mm

Tool modification - Rear part reduction; Guaranteed tolerances - According to DIN 7168 SG; Required parameters - Item code; - Total length L;

Diameter : 11 mm

This pilot drill bit is developed by SML. For its design, it is constructed with a size of 11 mm with a range of 130 up to 100. In addition, the structure of this pilot drill bit is double ...

Diameter : 12 mm

The 130-101 model is manufactured by SML, and is a pilot drill with a diameter of 12 mm that is a double-ended drill, which is utilized for 2-point punches that is made up of stainless steel. It is utilized ...

Diameter : 3.3 mm - 8 mm

This set is consist of a wide range of tools, specifically for drilling holes and for eliminating the surrounding paint in a single operation.

Diameter : 20 mm
Length: 65 mm

... Pipework is capable of drilling a TESEO installation under pressure. Models of the series have easy-to-install outlet plates on the live distribution lines; they feed new machines or pneumatic tools. They also have integrated ...

Diameter : 16 mm - 80 mm
Length: 133 mm - 243 mm

... conventional U-Drill systems. The manufacturing and design features of the Combat Z drill series allow for both extended tool life and reduced wear - substantially increasing the life of the inserts. ...

... produce a wide variety of High Performance drill types for your machining savings. The Most Advanced Drill Geometry Extreme Performance High Tool Life Special shank options available Single diameter ...

Step Drills Step drills combine two different drilling diameters into a single tool! Step drills are very versatile, and can eliminate the need for two tools for specific ...

Parabolic Drills A chip’s best friend! Open fluting on our Parabolic drills allows easy chip flow through the gullet. Combine that with a high polish, and you’re sure to have a great performing tool ...

Diameter : 1 mm - 13 mm
Length: 12 mm - 101 mm

Diameter : 1 mm - 13 mm
Length: 12 mm - 101 mm

Diameter : 2 mm - 13 mm
Length: 12 mm - 101 mm

Diameter : 5 mm - 25 mm
Length: 110 mm - 600 mm

For fitting in SDS-plus chucks For rapid drilling in concrete, masonry and natural stone Advantages SDS hammer drill bits of proven MÜPRO quality High-quality hard-metal cutting edges

Diameter : 4.76 mm - 12.7 mm
Length: 28 mm - 60 mm

Material-specific unique solution of a veined PCD tipped twist drill with double-angle point design for bur-free exits when exiting metal side of stack. The twisted PCD insert follows the flute helix ...

Diameter : 14 mm - 44 mm

... generation of turning/milling centres (MTM). With indexable inserts No. 232400 − 232780. Note: CAUTION! A disc falls off when the drill exits. Risk of injury if the component is rotating. Please take safety precautions.

Diameter : 1 mm - 2 mm
Length: 55 mm - 105 mm

High-accuracy boring of small holes Uses a NEW flute shape form and NEW coating technology.

Diameter : 4 mm - 40.5 mm

Extremely versatile and fast spiral step drill bit with an exceptionally long service life.