Compact I/O

... Low cost compact Analog I/O modules with DIN rail mounting 2 wire RS 485 port provided on the pluggable terminal block User-definable Address, Baud rate and Parity through DIP Switch High-Speed Modbus RTU (Slave) communication ...

This product is an IO-Link ｍaster with 8 channels of IO-Link port (Class A). It supports industrial Ethernet protocols of differing makers and can connect to the net-work of PROFINET, EtherNet/IP, Modbus TCP, CC-Link IE Field Basic, EtherCAT, and OPC ...

... Signal conversion in frequency range of 31 mHz to 20 kHz (16 bits) Max. sampling rate 50 kSPS 5 µs offset between channels Condition Monitoring For the S-DIAS system, EPLAN Macros are available for simple integration into the control cabinet. Performance ...

... The Eckelmann I/O system adapts to your application. From simple digital input, to analog modules, to special and safety modules for high-end applications, the UBM I/O system offers everything needed for an innovative machine concept. The strengths ...

The more compact machines become the more flexible the I/O component assemblies need to be. To address this requirement Berghof has introduced a whole series of ultra-compact and multifunctional I/O modules for the EtherCAT I/O system E I/O under the ...

... Overview
Our remote compact I/Os are designed to be housed directly on the machine. Easy to install, they allow you to create multiple configurations based on your industrial automation needs.

Features

• CANOpen DS401,

... Overview
The Creasol DomBus21 is a low‑consumption latching relay module for automated control of loads and monitoring. It provides three SPST latching relays, one optoisolated AC input for voltage presence/zero‑cross detection and four configurable ...

The SPiiPlus IOMnt-32-32 (Network Inputs and Outputs Module) is an EtherCAT digital I/O module with 32 inputs and 32 outputs. The input voltage is 24Vdc

... The PE16S represents a new level of performance and capabilities for PXI-based digital instrumentation. Based on the proven architecture of the PE16, the PE16S offers high performance pin electronics and an enhanced timing generator in a compact, 3U ...

groov RIO® revolutionizes remote I/O by offering over 200,000 unique, software-configurable I/O combinations in a single, compact, PoE-powered industrial package with web-based configuration, commissioning, flow logic software, and the ability to run ...

The SPC-SDIO-S0808SPK is an intelligent distributed IO module designed by SonnePower for industrial and vehicle control applications. With 8 flexible I/O channels, a CAN bus interface supporting CANopen, and built-in voice alarm functionality, this smart ...

The APM series modules provides easy installation and maintenance efficiency for monitoring process signals, such as temperature, voltage and current. With the ability to connect up to 31 modules, the APM Series features both standar RS-485 Modbus RTU, ...

CAN-IO module CIO is a versatile I/O module for the CAN bus. Designed for industrial series applications it has a robust and cost efficient layout. CIO supports eight digital 24 V / 500 mA output and eight analog input channels. The inputs are split in ...

The I/O systems are used in centralized or decentralized expansion for control and regulation tasks. Up to 63 slave modules can be connected to one master. The cabling is carried out quickly and safely via CAT cables. Master and slave modules can be physically ...

... The modular high-performance system is optimized for textile dyeing and finishing machines automation. It can be equipped with CANopen®, PROFIBUS DP® and Modbus RTU interface. One gateway contains up to 6 IO-boards in an aluminum rail housing. Features ...

IO-Link is a point-to-point communication protocol between IO system compatible with bus protocol and field devices (including sensors and actuators). Combining interface signal transmission with cable power supply technology can not only make the equipment ...

... Connect your components quickly and easily using adio connection in the field and link your systems with our newest and wifi-enabled I / O module SPACE. The Wifi-capable control module Space with integrated antenna enables wireless networking of individual ...

With an IP65 rating and up to 2A through each of the 18 outputs, the EtherCAT® I/O Box is suitable for almost all applications. Inbuilt diagnostics detect broken cables, short circuits and overcurrent’s quickly with onboard diagnostic functions and features. ...

... Panel I/O – Processor and Multifunction I/O Board with 16 A/D, 2 D/A, 20 DIO, One I2C and One RS-232/422/485 Port Features Compact board level size (4.5" x 8.5" x 0.75") Compatible with over 85+ UEI I/O boards Small enough to be mounted ...

The xtremeDB -1 (pronounced: "dash one") CANopen module combines many different I/O signal configurations. It offers a total of eight inputs, up to four of which can be parameterized in analog mode. Two of the digital inputs can also be configured as ...

IMO's remote Input and Output modules, commonly referred to as Remote-I/O, is a selection of serial, CAN and Ethernet 24VDC powered remote modules. Available as digital and analogue input and output, thermocouple, and resistance temperature detector (RTDs) ...

The IA-2116-U is a tiny and intelligent 16 Relays module, powered and controlled by any USB port. The IA-2116-U provides both NO and NC (Normally Open and Normally Close) channels, while the relays common line is shared between 8 or 16 relays, to ease ...

... NI34xx The NI34xx series is a smart controller product with an embedded 4G cellular modem. The intelligent software and ultra-compact portable form factor design make it an ideal solution for a variety of industrial applications like field device monitoring, ...

... Brand: GCAN Model: GC-1008~GC-8012 Application: Input and output modules Type - Characteristic - Signal - Channel Digital input - GC-1008 - Digital input (PNP) - 24V DC - 8-channel GC-1018 - Digital input (NPN) - 24V DC - 8-channel GC-1502 - ...

... The “TES” modules are Slave Modbus Remote Output Terminals on a RS485 network. Their implementation is very fast with the TESIS workbench. Numerous internal functions are pre-programmed, The Modbus communication mapping is predefined. Designed ...

... FEATURES - 24 digital channels (TTL/CMOS) - 3 ports (8-bit), bidirectional - bus-powered - USB 2.0, full-speed - compact size (40-pin DIL IC) 24 CHANNELS. DIGITAL. SIGNAL OUTPUT & MONITORING. Record and output digital signals. The USB-PIO-OEM ...

... -High-speed USB 2.0 multifunction DAQ -Sustained sampling speeds up to 1MHz -16-bit or 12-bit resolution A/D converter -Flexible, software configured functionality -16 single-ended or 8 differential analog inputs -8 input ...

... The analog input/output module has the following characteristics: The maximum analog input is 4 points, and the maximum analog output is 2 points. Signal type: voltage or current. The measurement accuracy is 12 bits, and the output accuracy ...

The module has a compact aluminium housing and offers the possibility of top hat rail mounting. The interfaces are quickly and con­ve­nien­tly avail­able on the front panel. Using the 3-wire con­nec­tion technology, all sensors can be con­nected directly ...

... The DP-CPU computer module connects a workstation with DisplayPort graphic output to a digital matrix switch of the ControlCenter-Compact, ControlCenter-Digital or DVICenter series. Standard variant for the following signals: DisplayPort™ 1.1 PS/2 ...

The real-time EtherCAT technology, widely used in machines and motion control applications. Outstanding performance, flexible topology and simple configuration characterize EtherCAT, the real-time Ethernet technology, which is the expansion of IEEE 802.3 ...

... One-Cable Automation: LioN-Power Hybrid I/O Modules Streamline power and data transfer in one space-saving module with fewer connectors. Hybrid connectivity integrates Industrial Ethernet protocols and peripheral voltage into a single 8-pole cable. With ...

FLIR Systems, Inc. is proud to be the exclusive, world-wide distributor for the MIO Series™ line of products from MoviTHERM. This intelligent new I/O solution allows FLIR customers to combine the FLIR AX8, A310, and FC-Series R cameras with the MIO for ...

Safe motion from a motion expert, Kollmorgen - Your skilled partner for safe motion control solutions. Safety logic, servo drives and motors and even complete safe automation solutions - Kollmorgen delivers matched components from one source. Additionally, ...

Safety in the system does not begin with the drives first, but at the control level. With the c250-S safety controller, a complete automation solution is provided for safety engineering and control and drive tasks. Topped with the safety I/O module, all ...

... 6U COMPACT PCI I/O BOARD 16 COM PORTS CPC-16COM 6U standard CPCI bracket, 32bit, 33MHz CPCI bus, support hot-swappable 16*serial port RS-232/RS-422/RS-485 switched, speed up to 115200bps Front I/O 2*DB68 port, support 8*serial port; support Rear I/O Operating ...

... - 48 Digital Inputs - Isolated RS485 port and ModbusRTU protocol support. - Sequential 2,000 Event Memory. - 19″ 1U - Ability to work at different voltage levels. (24/48 and 110/220 Vdc) - Safe operation under electromagnetic noise. - High-quality, ...

TC REMOTE I/O is a modular system, with DIN guide fixing, consisting of three types of couplers for CANopen or EtherCAT, plus three types of 16 points digital I/O modules. One of the two EtherCAT couplers is equipped with: 8+8 fast digital I/O (minimum ...