Configurable I/O modules

... For the S-DIAS system, EPLAN Macros are available for simple integration into the control cabinet. Type - +24 V DC Input voltage - +24 V DC (+18-30 V DC) Input current - 3.5 mA at +24 V Input delay - typically 1 µs Type - +24 ...

The Syslogic USB mini card is a software-configurable expansion card with four analogue inputs. The analogue I/O module can be configured for four voltage ranges: 0 to 5V, –5 to +5V, 0–10V and –10 to +10V. The analogue I/O module has a resolution of 16 ...

... strain gage and inductive half and full bridges, LVDT, RVDT quarter bridge with completion terminal DC and carrier frequency (CF) principle 2.5 and 5 VDC excitation, 2.5 and 5 VDCeff excitation carrier frequency, 600 Hz or 4.8 kHz configurable per ...

... The Ixxat Safe T100/CS offers device manufacturers an easy way to control safe I/O signals using a safe fieldbus protocol. The module meets the SIL3 safety requirement level as defined by IEC 61508 and Performance Level PLe / Category 4 in ISO 13849-1. Safe ...

The 905U and 805U simply and reliably communicate transducer and switch data by providing a 4-20mA, mV and digital interface in a small footprint radio. The sensor data is transmitted to a remote output as digital and 4-20mA effectively replacing the ...

... Overview
Our remote compact I/Os are designed to be housed directly on the machine. Easy to install, they allow you to create multiple configurations based on your industrial automation needs.

Features

• CANOpen DS401,

groov RIO® revolutionizes remote I/O by offering over 200,000 unique, software-configurable I/O combinations in a single, compact, PoE-powered industrial package with web-based configuration, commissioning, flow logic software, and the ability to run ...

... 4 Fully Isolated Analog I/O Channels, Modbus RTU Processing of 4 industrial standard signals individually configurable as current or voltage signal 4 galvanic isolated I/O ports protection against erroneous measurements due to parasitic ...

... EasySens® metering interface for wireless radio transmission of pulse signals for gas, water, electric and BTU meters with an S0 interface. • Application/type : I/O module • Purpose : Gateway, Measure values • Interface : EnOcean (868 MHz) • Configuration ...

... GF 30 % Polyamid 8(12)~32 VDC -40°C … +80°C 24 Pin Connector USB2CAN Interface for Configuring Device Up to 19 Digital Inputs Up to 2 Frequency Inputs Up to 16 Analog Inputs Up to 2 Current Inputs Up to 4 Resistive Inputs Up to 19 Low-Side Outputs ...

... The PLC TPLC050 has a modular and flexible structure based on ARM9. The inputs and outputs of the TPLC050 are expandable by adding Mect MPNC030 and MPNC035 series modules for analog signals and MPNC020 for digital signals. The analog and digital I/O ...

... The TBSPT8-DR is a precision 8 – channel PT100/PT1000 interface. Measurement and configuration is controlled via SDI-12 commands. The interface is equipped with 4-wire inputs, matched noise filters, surge- and over voltage protection. To achieve high ...

PROFINET is an open industrial Ethernet communication protocol, designed to collect and transmit data in industrial systems, and can realize real-time data transmission and reception. It is a real-time industrial Ethernet. Since profinet is based on Ethernet, ...

The 12 Inputs, 8 Analog and 1 Relay Outputs CAN I/O Module can extend machine control networks by adding I/O to the CAN bus. The controller features 1 Isolated CAN port for user-defined communications over the bus. It accepts up to 10 analog (0-5 V, 0-10 ...

... MI03XX IS AN I/O EXPANSION MODULE, CAN INTERFACE, USING CANOPEN COMMUNICATION, SUPPORTING 8 RELAY OUTPUTS AND 8 SWITCHING INPUTS. This product can easily and reliably collect the switching quantity and control the relay. Dimensions WxHxD (mm) 146 ...

... Small footprint for easy installation inside the side-frame High flexibility to fit in all applications Fully compatible with all ConveyLinx High communication speed Real time applications Error-free comissioning ...

... These boards require BRD.019.025 - max 8 modules x node Part code BRD.007.454 16 digital outputs (24 Vdc) protected against short-circuits and overload, max 1A. Part code BRD.007.458 16 digital inputs (24 Vdc) protected against reversal, with 10 msec ...

The xtremeBLOCK CANopen module combines many different I/O signal configurations. It offers a total of 12 inputs, eight of which can be parameterized as analog. The remaining four digital inputs can also be configured as frequency inputs or counters. ...

... M12 interface、IO-Link Hub、8AO，0-10V DC voltage analog module • IO-Link protocol device • 8 ports, 8 0-10V DC voltage analog quantities • Protection level: IP 67 (when correctly connected) • Shell material: Nickel plated Gd-Zn alloy Function Parameter • ...

ASi-5 Module with integrated IO-Link Master in IP20, 22,5 mm x 114 mm, with 4 contacts, 4 x IO-Link ports with configurable conectors for port class A or port class B, sensor supply (IO-Link supply and input/output supply) out of AUX, periphery connection ...

The DINDxx facilitates the reporting of the status of up to 8 dry contacts or up to 8 pulse counter indices. It also allows to remotely control industrial equipments and to check their proper functioning. The readings are regularly transmitted on Sigfox ...

... I/O acquisition modules with 4 inputs / outputs: NXT-A4 Remote I/O acquisition modules compatible with ModBus RTU (RS485) and ModBus TCP (Ethernet) protocols. Versatile IO analog module equipped with ModBus and CANBus NXT-A4 is an IO analog module ...

IMO's remote Input and Output modules, commonly referred to as Remote-I/O, is a selection of serial, CAN and Ethernet 24VDC powered remote modules. Available as digital and analogue input and output, thermocouple, and resistance temperature detector (RTDs) ...

... Designed for Excellent Data Collection CloudIO Data Collector is a versatile gateway that allows you to easily integrate devices using Modbus RTU protocol into modern IoT networks using Modbus TCP/IP and MQTT. It has a range of input and output options ...

... > Inputs: 4 configurable input for RTD, Resistance and Potentiometer > Temperatures: the correct functionality of the node has been verified in a temperature range between -10° and 60 ° C > Power supply: 24V (10-30V) > Galvanic Isolation: 2000 Vca ...