Diaphragm valves

DN: 1 mm - 50.8 mm
Pressure: 5 bar - 70 bar
Temperature: -20 °C - 60 °C

... The valve model TWIN has unique design that offers for high pressure applications with compressed gas two systems of slam shut for over pressure in only one body valve. It because the valve is equipped ...

Pressure: 17.2 bar

... incorporates an emergency valve, bypassing the fire detection systems for manual operation. Designed for vertical or horizontal installation, a globe pattern, line pressure operated FDV-PC0 valve features a direct elastomeric ...

DN: 15 mm - 50 mm
Pressure: 400 psi
Temperature: 80 °C

... PRESSURE PUMP CONTROL VALVE - Reduces rapid pump cycling and maintains a pre-set operating pressure for wells. Threaded female x female connection. Features a low lead alloy body & composite bell housing, Nylon reinforced Buna-N diaphragm. ...

DN: 0.125 in - 1 in
Pressure: 1 bar - 10 bar
Temperature: -10 °C - 70 °C

... Series of quick exhaust valves in nickel-plated brass and in stainless steel ...

DN: 15 mm - 200 mm
Pressure: 63, 40, 16 bar

... • Body Material: WCB/CF8/CF8M • Packing: PTFE/Flexible Graphite • Options: Worm gear/Ex-proof Limit Switch/Positioner ...

DN: 15 mm - 50 mm
Pressure: 10 bar
Temperature: 0 °C - 60 °C

... The MV diaphragm valve is particularly suitable for shutting off and regulating abrasive or dirty fluids. The chemical resistance of the valve is subject to the type of fluid, the temperature, the ...

Pressure: 0 bar - 16 bar
Flow rate: 40 l/h - 200 l/h

... -cone diaphragm system enables the valve to close. INSTALLATION The gas chlorine pressure reducing valve is always mounted in a chlorine system, so the installation depends very much on the system. ...

DN: 4 mm - 50 mm

... Sanitary Stainless Steel diaphragm valve Diaphragm valve Standard: DIN, SMS Size:DN15-DN100,0.5"-6" Diaphragm valve material: the material contacting ...

... flanged diaphragm valve or with metric spigot PVDF, PPH or UPVC from 1/2'' to 2''1/2 EPDM, FKM or PTFE diaphragm PN10 ...

... by an external hydraulic or pneumatic pressure. The valve position will be controlled by a hand operated selector valve. The valve and the controls will be a Dorot Series 100 valve or ...

DN: 15 mm - 50 mm
Temperature: -10 °C - 180 °C

... KTN 411GS valves with inclined seat, are remotely activated with compressed air , which starts a pneumatic actuator that raises seat for continuous processes. By supplying compressed air, the control piston and pan are raised by opening ...

DN: 1.5 in - 4 in

... Opening/closing: by 3W solenoid pilot valve •Applications : For water distribution •To remove operation of hydraulic valve by electric command Description G500-EL model valve is the hydraulic ...

Pressure: 6 bar
Temperature: 135 °C

... D-tec® divert valves are used for divert functions in processing plants. The valves are an ideal fit for UltraClean applications but can also be operated aseptically. The D-tec® stem diaphragm prevents ...

DN: 0.25, 0.375, 0.125 in

... 104168 Suckback Valve incorporates the suckback feature in a Normally Closed pneumatic valve. When air pressure is removed from the valve actuator, an internal diaphragm is pushed upward ...

DN: 0.5 in - 10 in
Pressure: 150 psi
Temperature: 70 °F

... The DAB Series of diaphragm valves are made from various materials to cater an array of different applications. A threaded version of the PVDF and PP end connections is provided. These connections are union socket that ...

DN: 0.25 in - 0.5 in
Pressure: 10.3 bar
Temperature: 165 °C

... demanding COP (Clean out of Place) requirements. The standard two-piece PTFE diaphragm design prevents the separation of the diaphragm typical of conventional laminated diaphragm designs. Corrosion Resistance Resistant ...

... years we have developed our Flush Bottom Tank Valves for various applications like RTD probe, Jacketed, Cylindrically Actuated, Diaphragm Actuated with Manual Override, Auto / Manual Switch, FLP Solenoid Valves, ...

DN: 15 mm - 100 mm
Temperature: -40 °C - 120 °C

... The DIAPHRAGM VALVE TYPE 14 uses a high quality rubber material,exhibiting lower compressive strain, for its diaphragm and cushion,resulting in optimum sealing performance. Tight Seal at Low Torque Using ...

DN: 15 mm - 300 mm
Pressure: 16 bar - 40 bar
Temperature: -40 °C - 100 °C

... Two-way control valves with one-seat design A. Hock Series 2000 valves are our two-way control valve all-rounders. Available in both standard and more complex versions, the valves of ...

DN: 15 mm - 80 mm
Pressure: 0.4 bar - 14.4 bar

... Valves for use in pharmaceutical or food industries; operated by piston or by diaphragm, different connections possible, for example with clamp connection DIN32676, male union DIN 11851, aseptic connections DIN11864 ...

DN: 15 mm - 200 mm
Pressure: 1 mbar - 16,000 mbar
Temperature: -30 °C - 150 °C

... Fully lined weir type Diaphragm Valves for shut-off or throttling of corrosive liquids or gaseous media. Due to its cavity free design it is also well suited for high-purity applications. Main features • Proven weir ...

Temperature: 330, 180, 265 °C

... contamination from air leaks into the valve. Reduced maintenance with extended valve lifetime Extend your treated GC valve head coating lifetime due to our reduced insert and valve ...

DN: 15 mm - 100 mm
Pressure: 6 bar - 10 bar
Temperature: -30 °C - 120 °C

... Material sealing element (in contact with medium): EPDM | FPM reliable and economical good control characteristics high kv value visual position indicator ...

DN: 25 mm - 100 mm
Pressure: 16 bar
Temperature: 0 °C - 110 °C

... EPDM-seat gasket cone rotatable, protected against water hammer flange connection without drain port (drain valve cannot be added) spindle thread not in contact with medium with a black handwheel free from ...

Pressure: 0 psi - 29 psi
Temperature: 5 °C - 60 °C

... • Compact series lineup that is perfect for small flow volume control of chemicals. Differential screw flow rate adjustment option can be selected for micro flow rate adjustment. ...