... Over voltage & under voltage monitoing relay for demanding AC or DC applications Plug in relay Smitt style pinning 1CO + 1NO contact DC and AC coil Flash barrier 2 LED indicators Cadmium free contacts Adjustable with ...
... The phase protection relays are designed to protect the three-phase loads from damage caused by mains voltage. High Voltage : 300V Low Voltage : 140V Asymmetry : 5% - 25% (Adjustable) Error Waiting Time : 0,1 sec. ...
Tense Electronic
... ＊Delicate Design: - MCU control with SSR control contact ＊ Optimum Flexibility - Wide Current Adjusting range (100%~1200%) - External CT available (100:5 / 150:5 / 200:5 / 300:5) - ...
Trigger voltage: 85 V - 480 V
... circuit, driving an electromechanical relay with one SPDT and one SPST contact. When correct voltage and phase rotation are applied, the internal relay will energize. A fault condition will de-energize the relay. ...
Tripping current: 0.1 A - 25 A
... current monitoring relays are used for the control of AC and DC current signal in various industrial and domestic applications. The measuring part of the instrument is metallically separated from the current connection ...
Tripping current: 16 A
... AC 400 V. Output contact: 2x changeover/DPDT 16 A /250 V AC1. Sensitivity adjustable by potentiometer. 3-MODULE, DIN rail mounting. ...
ELKO
... with two relay outputs, and you can program which of the parameters are active on each relay. The relays are activated at normal conditions, and releases if one or more of the selected parameters are ...
COMADAN
Tripping current: 5 A
... Voltage monitoring in 3-phase mains Meassuring circuit data Functions OVER, OVER+LATCH, UNDER, UNDER+LATCH, WIN, WIN+LATCH timing adjustment for tripping delay Time intervals (timing adjustment) tripping delay (0,1...10 ...
RELPOL
... The ENTES Current Monitoring Relays are specially designed to offer protection to the motors and networks against under and over current conditions. The relays are available in four series that include ...
ENTES
... The SM 501 is a supply monitoring device which is suitable for providing protection from phase reversal, phase-phase unbalance and phase loss. It is suitable for 3 phase and wire systems through the voltage sensing mechanism. The device ...
General Industrial Controls (P) Ltd.
Tripping current: 5, 10 A
Trigger voltage: 115, 230 V
... Fluid Level Monitoring Relay 230VAC Sensitivity Adjust On Delay and Off Delay Timer Filling & Emptying Functions Key Features • Compact 36mm Design • Filling and Emptying Functions • LED Indication ...
Tripping current: 5 A
Trigger voltage: 30, 230 V
The BMRCD-01 modular residual current device can be installed with MCCB and MCB in addition to shunt/under-voltage release for residual current protection. BMRCD-01 consists of a controlling module and detecting modules (only B-type detecting modules ...
Tripping current: 0.2, 4 A
Trigger voltage: 195 V - 253 V
... corresponding red LED lighting up. In the normal operation the output relay is pulled on and the power light (green LED) lights up. In the fault case as well as at loss of the supply voltage the relay drops off and the ...
Elektra Elektronik GmbH & Co. Störcontroller KG
... disappear, the relay turns off. It is available in two versions: • F 22. The relay turns ON only if the sequence is wrong. • F 33. The relay turns ON only if the sequence is right. The leds on ...
ELETTROMECCANICA CDC s.r.l.
... 3-Phase Delta Monitoring Relay, Sequence and Phase Loss, 2 SPDT Relay Outputs, IP20, DIN- rail mounting, Measuring Range 177 to 550Vac, 22.5x83.5x99.5mm housing Mounting Industrial ...
Trigger voltage: 24, 115, 230 V
... phase voltage relay A relay for monitoring AC voltage on the supply network, in accordance with application of sensitive supply voltage equipment or as an alarm relay for monitoring ...
Brodersen Controls
... The range includes relays suitable for installations with DIN rail, Panel or Base Mounting. All relays are suitable for use on a.c. systems and will be unaffected by d.c. components ...
Tripping current: 0.02 A - 2 A
... Under or Over current monitoring (selectable) - 3 Selectable current ranges (0.2A, 1A or 2A) - Adjustable Trip level, Hysteresis and Time delay + Latch - Isolated Auxiliary supply - SPDT Relay output - 17.5mm wide, ...
Broyce Control
Today KNX is the world standard, open and compliant with the main European and international regulations, for automatic and decentralised management of technological systems in a wide range of situations: commercial buildings, industry, offices, private ...
Tripping current: 0.25 A - 10 A
... points independently adjustable • LED indicators for power supply, relay 1 (R1) and relay 2 (R2) Control relay for monitoring AC and DC voltage with two separately adjustable relay ...
HIQUEL
Trigger voltage: 80, 150, 350, 600 V
... True RMS measurement). -LCD display. – Measuring frequency range:45Hz-65Hz. – Voltage measurement accuracy<1%. – 2-MODULE, DIN rail mounting. • Control for connection of moving equipment(site equipment,agricultural ...
Zhejiang Geya Electrical Co., Ltd
Trigger voltage: 0 V - 480 V
... The SLU-100 series consists of various universal motor relays that were designed to provide a cost-effective protection solution against premature failure for various equipment, as well as against downtime that may be caused by voltage ...
... Monitoring relay for monitoring asymmetry, phase failure, phase sequence errors, overvoltage and undervoltage of a three-phase connection. With external fault acknowledgement. ・Connection with screw ...
METZ CONNECT
... there is not any fault message. OK message: Relay is activated (contacts 11-14 and 21-24 closed), LED is off. Fault message: Relay is deactivated (contacts 11-14 and 21-24 open), LED is on. Key pressed: Relay ...
METZ CONNECT
Monitoring of direct or alternating voltages in live systems. It is displayed whether the adjusted values are exceeded or not reached, and a switching process is triggered. The integrated 7-segment display indicates the sources of the ...
METZ CONNECT
... Universal speed relay for all speed monitoring applications Intuitive user configuration using control buttons and LCD display Relay and solid state outputs with individual speed range monitoring Supports ...
Trigger voltage: 24 V - 230 V
... Insulation monitor for electrical installations Current measurement < 1 mA 3-digit screen for reading and configuration Double entry for PTC, PT100 and bimetallic contact probes Optional connection for RS485 and MODBUS-RTU ...
the best suppliers