Electricity measuring instruments

... display of Fresnel Diagram at 50 Hz Control of TCFM shunt tuning by measuring voltages and currents per phase at 50 Hz Verification of TCFM shunt compensation by measuring voltages and currents ...

The MultiField electrosmog meter is a device for quick measurements in a same time of 3 frequency meters: - Magnetic field low frequency (50 to 60Hz) with sensor triple axis X,Y,Z, in mGauss or µTesla with a range of 0,2 to 2000mG. - ...

The OUT MiniModule (OUTMM) generates user-configurable output signals according to predetermined values through CAN bus messages. The OUTMM was systematically developed for use in vehicles and on the test-bench and is available with ...

The PQI-DE is a voltage and power quality measurement device, fault recorder and residual current measurement device all in one. The device combines numerous functions. It can be used as a power quality interface to fulfil network quality ...

The adhesive strength of a surface usually depends on its surface tension. In case the surface tension of a surface is much lower than the surface tension of the used ink, the wetting is disrupted. This results in a poorer adhesion. The ...

The Infralytic UV-Mini is an additional measuring device for the Infralytic hand-held device NG3. We designed the UV-Mini especially for measuring the oil layer thickness on metallic ...

The PEMU4 represents a new level of performance and capabilities for USB-based SMU (Source Measurement Unit) instrumentation. The PEMU4 supports -1V to +6.5V 0.5A with FVMI, FVMV, FIMV, FIMI modes. 4 channel can be ganged to support high ...

... and current Intelligent Measurement Technology Measuring of essential electrical parameters e.g. measuring von active power, reactive power und apparent power of light fittings e.g. measuring ...

The ID107 field meter is a precision hand-held instrument designed for the investigation of electrostatic problems in experimental and industrial situations. Based on a rotating field mill design, the ID107 is used ...

TM-196 is designed for measuring and monitoring Radio Frequency(RF) electromagnetic field strength and capable of measuring the frequency range of 10Mz~8GHz. It's ideal for the applications of: - RF ...

... measure electrostatic fields. By selecting the measuring distance, the field value in volts is obtained directly. The housing is made of antistatic plastic with laminated front side. The influence measuring ...

Instrument for easy measurement of the relative magnetic permeability µr of feebly magnetic materials and workpieces with a permeability between 1.001 and 1.999. The permeability is measured by touching the workpiece ...

... electrostatic charges, fields and potentials. This convenient measuring unit is a precision instrument which is suitable for use both in the laboratory and directly at the machine. Three measuring ...

... differential pressure measuring instrument with digital display, analogue output signal, two switch-over contacts for low and high limit, buzzer and quit button is fitted in a plastic housing for surface ...

High-Frequency/High-Current Meter The high-frequency/high-current meter LCA-101 does not use a metal core but a clamp, eliminating the problem of iron loss and saturation distorting linearity affecting results. There are two sensors, ...

... . Characterize film electronic structure. Small changes in the electronic structure of molecules can be detected by measuring the change in surface potential. Characterize molecular structure. Quantify the effects ...

... temperature if needed. The YSI 556 MPS conforms to GLP standards. Multiparameter Instrument (carrying case (5061) and PC adaptor RS-232 included) used with the 556 handheld instrument. Packed with Features! Battery ...

The AL15 combines the features of several hand-held meters. It is designed for multi purpose operation and measures pH/Redox, dissolved oxygen and conductivity/TDS. The AL15 incorporates an intuitive user interface, large, easy to ...

Description The digitally controlled PMT-AW/R is a Precision transducer for AC Current and balanced or unbalanced load system active (Watt) or reactive (VAr). To be used in applications that require a very fast response, precision ...

The Model 511 is a high-quality, portable, chopper-stabilized, non-contacting electrostatic field meter designed for measuring and auditing electrostatic fields in ESD sensitive areas so that operators can find them before ...

... scratch tests, and they are mostly for thicker coatings in micrometer range. Taperader®, is by far the only measurement instrument that provides a mobile, fast, in-situ solution for real-time analysis of surface coatings, ...

... semi-conductive rubber materials, according to ISO 1853. The measuring range is from 10-1 Ohm·m to 108 Ohm·m. The system includes: A voltage instrument with 200 TΩ input impedance A current ...

VA503 PEN R/C METER FOR SMD Re-Calibrated SMD Components Identifier in a Set of Tweezers Specification: Resistance:4000Ω/4KΩ/40KΩ/400KΩ/4MΩ±(1.2%+2),40MΩ±(2.0%+5) Capacitance:4nF±(5.0%+5),40nF/400nF/4uF/40Uf/100uF±(3.0%+3) Diode ...

The Triplett TDR100 is a precision cable tester that uses TDR (Time Domain Reflectometer) technology to measure cable length. It can be used for any cable consisting of at least 2 insulated metallic elements, one of which may be the sheath ...

Diagnostic test system for power apparatus condition assessment. Applications Loss angle (Power Factor/Tan δ), capacitance and inductance measurements on high voltage equipment top↑ User Benefits Easy, automated measurement ...