Electrochemical electrodes

DULCOTEST® Sensors for Chlorine Dioxide Graduated measuring ranges 0.01 – 10 mg/l Chlorine dioxide measurement with DULCOTEST® sensors offers precise, reliable, application-specific measured values in real time for all oxidation and ...

... OPTISENS ORP 8590 is an ORP sensor for general water and wastewater applications. The sensor type is equipped with a platinum electrode, a large ceramic diaphragm and a temperature sensor (Pt100). It features a robust ...

Liquid-electrolyte pH probe with integrated temperature sensor and VP connector The InPro2000 is a combination pH probe with an integral temperature sensor designed for highly demanding applications. Three liquid electrolytes are available ...

465-50 is the classic, refillable liquid-electrolyte pH probe for long lasting precision measurements in biotech applications. Features and Benefits Reliability and accuracy Long lifetime High pressure resistance

Refillable electrolyte chemical probe with patented silver-ion trap HA465-50 is the classic, refillable liquid-electrolyte pH probe for long lasting precision measurements in chemical applications.

Measurement electrode, also known as the metal electrode To perform ORP measurements, you have to use this electrode with a reference electrode (see Laboratory Reference ...

... measures reliably even in highly alkaline media or hazardous areas. Designed for low maintenance and a long operating life, the electrode offers you best value for money. Thanks to Memosens digital technology, CPS11D ...

The iPt Titrode by Metrohm is manufactured for use in redox titrations without affecting the pH value. There is an added memory chip for storing sensor data such as calibration data, calibration history, article number and serial number ...

The iTrodes is called the intelligent electrodes used for titration, which is the most important component of any titration system. The built-in memory chip enables the storage of important sensor data such as article ...

The Combined iPt-ring electrode is an ingenious sensor for redox titrations with change of pH value and ORP measurement. It consists of iTrodes that permits the storage of various sensor data which are read automatically ...

The TB254 conductivity cell can be installed either in-line or used in submersible applications. In-line applications use 1 in. NPT receptacles where the sensor is either inserted and twisted 90 degrees or inserted and held in place by ...

The TB26 conductivity cell is easily installed into process lines and vessels via the integral 3/4 in. NPT threads, submersed directly into lines and vessels via the 1/2 in. NPT backthreads, or inserted into a process line or vessel through ...

The TB27 conductivity cell can be inserted or removed from process lines or vessels via a ball valve without disturbing the process. The TB27 sensor is designed for applications that exceed standard hot-tap sensor pressure ratings and ...

The FoodTrode is a robust, combination electrode for measurements in media containing proteins. Three ceramic diaphragms guarantee quick, accurate measurements. Benefits Robust combination pH electrode ...

The TipTrode is a refillable, combination pH puncture electrode made especially for use with solid and semi-solid samples. Benefits Refillable combination pH puncture electrode Pointed membrane ...

... maintenance-free, combination pH puncture electrode made especially for use with solid and semi-solid samples. Two Single Pores make clogging of the diaphragms practically impossible, and ideally suit these electrodes ...

Autoclavable sensor providing high reliability and precision. Also digital, with Memosens technology. Facts Gel electrolyte, pressurized and long-term stable Ceramic junction Safe sterilization with temperature monitoring Integrated ...

For special requirements and high-precision measurements, with refillable liquid electrolyte. Elimination of typical junction problems resulting in high measurement accuracy in ultrapure water as well as in heavily polluted media and ...

For low-conductivity media or low temperatures, refillable liquid electrolyte Facts Precise measurement under difficult conditions (low conductivity, contaminations) Measurement at low temperatures Integrated temperature detector Self-cleaning ...

Ammonium-sensitive electrode system for measuring in potable water. Ammonium sensor: Sensor with ion sensitive membrane in mechanically and chemically inert plastic case (IP 68) with excellent life time. Reference ...

Nitrate-sensitive electrode system for measuring in potable water. Nitrate sensor: Sensor with ion sensitive membrane in mechanically and chemically inert plastic case (IP 68) with excellent life time. Reference ...

Fluoride-sensitive electrode system for measuring in potable water. Fluoride sensor: Sensor with ion sensitive membrane in mechanically and chemically inert plastic case(IP 68) with excellent life time. Reference ...

... seconds. HIGH PERFORMANCE FEATURES • Accuracy of ±10 mV ORP • Proprietary Sensor Design • 99.9% Pure Platinum Electrode • 3 Calibration Options with Automatic Solution Recognition • Automatic Temperature ...

... is necessary to calibrate the electrode after start-up and then in regular time intervals. 4.A combined electrode must not drain at the active tip, otherwise it becomes useless. To recover the active ...

pH electrode with epoxy body to be used with pressure up to 6 bar and temperature not exceeding 60° C. Measuring range 0÷14 pH. Other electrodes types or other cables length upon request.

Redox (ORP) electrode with epoxy body to be used with pressure up to 6 bar and temperature not exceeding 60° C. Measuring range: ± 1.000 mV. Other electrodes types or other cables length upon request.

Glass body pH or Rx screw connector electrodes, head PG 13,5. Measuring range: pH: 0÷14 pH - Rx: ± 1.000 mV. Other electrodes types or other cables length upon request.

APLIROD® dynamic copper electrode for low-conductivity soils. It is filled with a mixture of ionic compounds and has a moisture condenser that absorbs the environmental humidity and dissipates it in the soil surrounding ...

The PH electrodes made by SCHOTT® Instruments IoLine. It measures iodine and iodide. The unit is applicable on laboratory measurement tasks. The electrodes are 100% metal ion free that are fit to measure ...

... and proper sensor recognition. The electrodes are programmed to suit various applications and deliver a reliable measurement. The series is offered in SCHOTT® Instruments BlueLine, ScienceLine and IoLine electrodes ...

The pH process electrodes of SteamLine are low maintenance electrodes. The temperature range is 0 to 135°C and pH 0 to 14pH application range. Gel electrolyte is used by the reference electrode. The ...

... area 99.99% pure platinum band for a fast stable response. The P14 and O14 electrodes have an Epoxy body while the PII and O11 electrodes have a Glass body. The GT135 pH Electrodes have ...

... cleaning adapters for their pH electrode systems to reduce maintenance and improve electrode life in applications where a pH or Redox electrode bulb is prone to coating. They provide ...

... without quick disconnect top caps. These epoxy body electrodes can stand several applications thanks to the high chemical resistance of the material. A simple and reusable gland can be used for economic electrode ...

This line of pH/ORP electrodes with glass body has been designed to fit a wide range of applications. Different type of junctions guarantee to find the proper solution in according with application needs: version with ...

This is the rugged version of the traditional flat electrodes with an improved self-cleaning effect. Installation and maintenance are easy due to the quick disconnect BNC connectors. Built into the electrode’s ...

calomel electrode for measurements in very small volumes long-term stable (electrolyte with saturated KCl solution and KCl reserve) shaft diameter: 5 mm standard glass cone (NSK 7) is available → for gas tight mounting ...

reference electrode with Ag/AgCl reference system for measurements in very small volumes long-term stable (electrolyte with saturated KCl solution and KCl reserve) shaft diameter: 5 mm easy cleaning by removing the sleeve ...

reference electrode with Ag/AgCl reference system for measurements in connection with ion-selective electrodes ong-term stable (electrolyte with saturated KCl solution and KCl reserve) shaft diameter: 12 mm

The Princeton Applied Research Model 616A Electrode Rotator is a high precision, low mass rotator that performs well with virtually any potentiostat. When connected to Princeton Applied Research electrochemical ...

... Applied Research model 636A Electrode Rotator is a high performance system providing rapid acceleration and excellent speed control. The model 636A may be connected to any of the Princeton Applied Research electrochemical ...

Product Description Immersion UV is not suitable for the occasion of poor water quality conditions, such as sewage treatment plant entry),In these situations, the optical window surface is contaminated in a few minutes, every time the ...

The PH Electrode Series SenTix® is manufactured by WTW. The product has high quality electrodes by WTW that has favourable measurement and very accurate. It has a low-resistance to glass membranes that ...

... SenTix® from WTW are pH electrode equipment. These tools are usually used as electromechanical sensors. These apparatus offer sensitive measuring signals, and must be routinely serviced and calibrated. In addition, these ...

These Ion-selective Electrodes produced by WTW are used for challenging ISE applications. They come in two types, providing a choice between the 500 series half cell types or the 800 series combination electrodes. ...

CONSISTENCY CONTROL All consistency control solutions are fully integrated in the SKAKO CONCRETE control systems. AQUAMAT electrodes built into the bottom of the mixer for the measuring of the moisture content of the concrete mix.

"Replace unreliable sensors & cut maintenance costs" ATI's Q22 specialty pH/ORP sensors are designed for use with all non-ATI analyzer systems and generic panel meters, allowing these end users to utilize the same robust features of ...

The MeterLab series is manufactured by Radiometer Analytical, and is an electrode that is ideal for use in gauging a variety of elements, which includes pH, mV, Ion and conductivity. The series is available in a wide ...

... MeterLab® is a slection of laboratory pH electrode developed by Hach Lange. The series incorporates all elements of the measuring chain such as pH, glass or reference electrodes, metal electrodes, ...

... wetting cap Easy-to-use wetting cap with a self-tightening screw lock that guarantees clean and secure electrode storage. ARGENTHAL™ - For a long electrode life The ARGENTHAL™ reference system uses ...