DN: 150 mm - 400 mm
... General purpose of a slide valve is to adjust or fully stop the flow of bulk solid material inside silos, hoppers and similar closed volumes. OZB slide valves are available with square, rectangular and round sections. SVQ: ...
Pressure: 75 psi - 150 psi
Temperature: -12 °C - 227 °C
... The Mark 87 piloted temperature regulator is the sliding gate valve engineered to provide wide rangeability and greater accuracy for a variety of temperature control applications. Utilizing the same technology as the ...
JORDAN VALVE
DN: 65 mm - 250 mm
... ● Long cycle life bellows (3000 cycles) in Gr. 321 (stainless) or Inconel. Designed and successfully tested in high pressure/temperature conditions. ● Two-part bellows. ● Two secondary stem seals: a) Backseat in open position; b) Graphite packing. ● Low ...
VELAN
DN: 3 in - 36 in
... Red Valve's Series DX Slurry Knife Gate Valve is recognized as the most durable and user friendly knife gate valve designed for difficult slurry applications. When ...
Red Valve
DN: 40 mm - 300 mm
Pressure: 0 bar - 16 bar
Temperature: -10 °C - 85 °C
... The valves in series 20.900/21.900 are soft seated gate valves, made of ductile iron, manufactured in accordance with severe product norms and relevant norms, and in conformity to EN ISO 9001; They are ...
Brandoni
DN: 100, 200, 250 mm
Pressure: 0 mbar
... Category - Gate valve, manual, ISO, stainless steel Actuation - manual via hand crank Item description - Long life, bellow sealed gate valve for high vacuum (HV) mounting flanges DN100 ...
VACOM
... As a manufacturer and exporter of industrial control valves, KOSA has a full range of industrial control valve solutions and continues to provide the most competitive control valve products to customers ...
SuZhou KoSa Environmental Protection CO.,LTD
DN: 50 mm - 500 mm
Pressure: 0.1 bar - 1.5 bar
Temperature: -25 °C - 80 °C
... The disc valve is used for dust tight and (as an option) pressure tight locking of a hopper with bulk solids, or as a locking valve in pipelines for gases. • Dust-proof, pressure-tight, vacuum-tight locking device • ...
DN: 2 in - 12 in
Pressure: 14, 24, 16, 21 bar
... and FM Approved • Valves can be easily fitted with OS&Y Tamper switch HD ductile iron Gate Valves are available as OS&Y Type with rising stem and as NRS type with non-rising stem. Gate ...
... technology that includes high-temperature seals and adjustable valve pins, the system provides a flawless injection molding process. Speak to us today about our VeriShotᵀᴹ Single Valve Gate System! VeriShotᵀᴹ ...
DN: 15 mm - 50 mm
Pressure: 16 bar - 800 bar
Temperature: -80 °C - 80 °C
... Cryogenic Gate Valve Body: SS304,SS316L Bonnet: 06Cr19NI10 Stem: 06Cr19NI10 Packing: PTFE Disc face ring :PTFE Applicable medium: O2, N2, Ar, LNG ...
Valvesonly Europe
DN: 15 mm - 300 mm
... Pennant gate valves conform to API 600 / API 602 / API 603 and are provided with smooth machined full bores. Full opening of the wedge eliminates additional pressure drop across the valve. Long screwed- ...
DN: 50 mm - 700 mm
... Neles™ knife gate valves are ideal for all industrial shut-off applications for example in pulp & paper and water & wastewater industries. Features Neles knife gate valves provide ...
Pressure: 6 bar
... The EBL wolf-mouth valve is used at the outlet of storage silos for the extraction of spray dried products. ...
Pressure: 0 Torr - 760 Torr
Temperature: 0 °C - 150 °C
... removed from the body without requiring removal of the valve from the system. Please contact us for options such as roughing ports or valves that remain open in the event of power failure. Manual Gate ...
Kurt J Lesker
DN: 40 mm - 600 mm
Pressure: 2 bar - 10 bar
Temperature: 150, 120 °C
... Material Cast iron Dimensions DN40 - DN600 Connection Flange ...
Dansk Ventil Center A/S
DN: 50 mm - 1,000 mm
Pressure: 10 bar
Temperature: -40 °C - 250 °C
... Also for knife gate valves you can ask Vapo Techniek BV. We supply manual operated, hydraulic, electric and pneumatic actuated. ...
DN: 200 mm - 250 mm
Pressure: 10 bar - 40 bar
... Standard features Split wedge = Type 700 JJ Flexible wedge = Type 700 HJ Die-forged body and bonnet Full bore Outside screw and yoke Non-turning rising stem Yoke sleeve Available with flange and buttweld ends Optional standard features GA Split ...
Stahl-Armaturen PERSTA
DN: 50 mm - 2,000 mm
... Wafer style, uni-directional knife gate valve. One piece integral cast body with guides to support the gate and seating wedges. High flow rates with low pressure drops. USE This knife gate ...
C.M.O.
... Feeding and metering slide gate series is specifically designed for gravity-flow applications. The variable slide gate actuation setting enables fractional material flow and full-open or closed formats. It is constructed ...
DN: 3 in - 24 in
Pressure: 150, 300 psi
... actuated knife gate valves are available from 3" to 24" in size. Available in standard pressure ratings of 150PSI (ANSI B16.5 Class 150), heavy duty fabricated carbon steel or stainless steel knife gate ...
DN: 80 mm - 1,200 mm
Pressure: 1 bar - 42 bar
Temperature: -196 °C - 538 °C
... Wedge gate valve gate can have two different versions: rigid gate and flexible gate. QLS series actuator can be used with Z7 valves, and EML series ...
Wuxi Smart Auto-control Engineering Co., Ltd.
DN: 50 mm - 550 mm
Pressure: 600 bar
Temperature: 650 °C
... Applications: Feed-water and live steam systems. Design: High-pressure weld-end gate valve with pressure-seal bonnet, forged body from carbon steel, non-rotation stem, wedge-type. Actuators: Hand wheel, electric, ...
DN: 80 mm - 400 mm
... slide
gate
valve from Kubota Brabender Technologie. Designed for reliable on/off control in feeder and process lines, primarily used as the automatic refill
valve for loss‑in‑weight feeders.
Technical ...
Kubota Brabender Technologie GmbH
DN: 80 mm - 400 mm
... ul>
Kubota Brabender Technologie GmbH
DN: 80 mm - 400 mm
... the Flat Slide 200 slide
gate
valve from Kubota Brabender Technologie. Designed for solids on/off control and as an automatic refill
valve for loss-in-weight feeders.
Technical details
- Slide
Kubota Brabender Technologie GmbH
DN: 0.25 in - 2 in
Pressure: 600 psi
... Investment casting ASTM-A351, CF8M, Class 600, Screwed bonnet, Beveled dise, Intégral seat, Rising-stem, and Handwheel. Body - SUS316 orSUS304 Bonnet - SUS316 or SUS304 Net - SUS304 Stem Washer - SUS316 orSUS304 Pin - SUS316 orSUS304 Thrust - ...
DN: 2 in - 12 in
Pressure: 200 psi
... • Design Standard: AWWA C515 • Nominal Pressure: 200PSI • Flange Standard: ASME/ANSI B16.1 Class 125 or ASME/ANSI B16.42 Class 150 or BS EN1092-2 PN16 or GB/T9113.1 • Epoxy resin coating both inside & outside the body • It could be operated by the ...
... Knife gate valves [SRP] in EN-GJL-250 cast iron with bronze blade seat for perfectly smooth travel even after long periods out of use. Flanges meet the UNI standards for perfect interchangeability with the pipelines of ...
DN: 0.375 in - 0.5 in
Pressure: 145 psi
Temperature: 32 °C - 140 °C
... FAV Series soft start valves protect your pneumatic system and give you peace of mind whenever installation or repair occurs. The valves raise incoming pressure, supplying air at low speed to avoid damaging critical components. ...
DN: 100 mm - 400 mm
Pressure: 24 bar
... . In standard applications, the fast-action explosion isolation gate valves can be used with dust, gas or gas and dust mixtures. Not unlike HRD systems, the explosion isolation gate valves ...
DN: 80 mm - 800 mm
Pressure: 4, 6, 10 bar
Temperature: 180 °C
... The gate valves to the sectioning of a bulk material, through the central shovel which intersects the fluid passage and provides complete sealing. Steel or polymer construction with square, round or rectangular passage ...
DN: 160, 110, 200 mm
... We offer a range of manual valves (knife gate valves) for piped slurry systems, which fit standard PVC pipe diameters of 110, 160 and 200 mm. All valves are in acid-proof stainless ...
... Slide gates are a component widely used in material transport and storage plants. Motridal produce heavy-duty valves with either manual, motorised or pneumatic control. The field of production, in addition to a full range ...
DN: 1 in
Pressure: 20 bar
Temperature: -10 °C - 66 °C
... NAFFCO Gate Valve is usually installed in Dry riser inlets and Fire Hose reel assembly where unauthorized operation has to be avoided.A typical application of this valve is installing these at inlet pipe ...
naffco
DN: 32 mm - 1,500 mm
Pressure: 10, 16 bar
... These valves are available in non rising as well as rising spindle type suitable for clear water up to 450 C. These valves are designed with total compliance with applicable design and testing standards. All designs are ...
... Sliding gate is used to allow or interrupt product flow, or change the flow direction to any desired terminal. It is generally placed under chain conveyors, tubular conveyors etc. Features & Advantages • Compact Design • Leakproof Structure • ...
DN: 50 mm - 1,200 mm
Pressure: 600,000 Pa - 1,600,000 Pa
Temperature: -40 °C - 600 °C
... Knife Gate Valve Z673H series slip type pneumatic knife gate valve is a kind of important control valve in the plant production process. Switch controlling can be ...
6 expert tips
Prioritize valves with extended service intervals to reduce the long-term financial burden of frequent downtime and component replacement.
Select low-leakage packing designs to meet international environmental standards and avoid costly regulatory fines in chemical processing plants.
Verify standardized dimensions to ensure seamless replacement and minimize modification costs during critical infrastructure upgrades or maintenance shutdowns.
Demand mill test reports to confirm alloy purity and ensure the hardware can withstand the specific corrosive environment.
Calculate the necessary torque for automated systems to prevent actuator overload and ensure reliable remote operation during emergencies.
DN: 25 mm - 200 mm
Pressure: 10 bar - 16 bar
... HYDRANT GATE VALVE S58 Compact gate valve with rubber-covered self expanding split ring seal, suitable for frequent operation with turbid irrigation water. On-off valve ...
the best suppliers