... Anti-block slide gates are available to intercept the falling flow inside the hoppers, along with guillotine slide gates and butterfly dampers, with manual or pneumatic control. This series of “compass” gates ...
DN: 40 mm - 300 mm
Pressure: 10, 8 bar
Temperature: -10 °C - 150 °C
... raised face. Honzontal or vertical installation. Max working temperature with standard gaskets +80° C. Gate valves, Gate valve flat body F4, Gate valves ...
Mival
DN: 25 mm - 100 mm
Pressure: 3.5, 1 bar
... Double O-ring shaft seals (3" & 4") exchangeable (EPDM or FPM) Safety close system Full flow ¼" × 20 male thread on shaft for easy handle extension (3" & 4") Simple and maintenance free operation Seal materials - EPDM, FPM ...
DN: 25 mm - 400 mm
Pressure: 3 mbar - 200 mbar
Temperature: 0 °C - 140 °C
... Safety: Guided valve disc allows reproducible closing and sealing after activation. Time savings: The pneumatic venting allows easy integration of the valve in a fully-automated cleaning cycle (CIP, SIP). Flexibility: ...
DN: 0.5 in - 56 in
... forged steel gate valves. Its gate valve iron gate are resilient or metal-made with metal-seated, PN10 to PN16 or ANSI 150, sizes ½” to 40”. It also provides an ANSI ...
DN: 80 mm - 300 mm
Pressure: 10, 16 bar
Temperature: 50 °C
... Resilient-seated gate valve with boltless cover connection as replacement valve for the dismantling of flanged valves according to EN 558-1 (DIN 3202, F 5). Proven design with innovative ...
VAG-Group
DN: 25 mm - 50 mm
Temperature: -100 °C - 300 °C
... of maintenance, delivering operational reliability in the most challenging applications Vonk unique rotating disc choke valves have been designed for the upstream segment of the oil and gas market, excelling in applications with high ...
Pentair Valves & Controls
DN: 40 mm - 300 mm
Pressure: 10 bar - 16 bar
... DN 40 - 300 PN 10 - 16 Body: EN-JS1050 Coating: Epoxy Resilient-seated gate valves according to European standard EN 1171 with straight, smooth and non-constricted passage. Internally enamel, externally EKB. For water, ...
ERHARD
DN: 0.5 in - 2.5 in
Temperature: 105 °C
... Overview The Roda Deaco RDS1 Swing Gate Valve is a compact air intake shutoff valve that provides emergency overspeed shutdown of a diesel engine. The RDS1 Swing Gate Valve ...
AMOT
DN: 25 mm - 150 mm
Pressure: 0 bar - 100 bar
Temperature: -20 °C - 60 °C
... off the flow of gas as the pressure increases or decreases below the affixed rate. The sleeve type valve does not need outer bypass in opening the valve. It has various Pressure Equipment Directive 97/23/EC categories ...
DN: 50 mm - 75 mm
Pressure: 6 bar
Temperature: 0 °C - 60 °C
... • Solvent inner connection to or solvent outer connection to pipe through end connectors. • Handle indicater of flow direction. • Closing pump position is not allowed under pressure. • Excellent flow characteristics. • Visual position indicator. • ...
Cepex SER
... factors such as the flow conductance and leak-tightness of valves are of great importance. The valves of Leybold are optimized with regard to these demands. For every flange system there are a lot of valve ...
DN: 25 mm - 150 mm
Pressure: 0 bar - 10 bar
Temperature: 130 °C
... Function: leakage butterfly valve NC in closed position, flushing valves NO in open position With activation of air pressure, first the flushing valves close, then the leakage butterfly valve ...
Evoguard GmbH
DN: 50 mm - 300 mm
Pressure: 1 MPa
Temperature: 450 °C
... Double Plate Gate Valve refers to Australian "Armstrong" valve technology and has been successfully developed by researchers for many years. The valve is replaced by double valve ...
Zhejiang Gute Pneumatic Machinery Co., Ltd
DN: 50 mm - 600 mm
Pressure: 4 bar - 10 bar
Temperature: -40 °C - 130 °C
... Body material Cast iron Gate material Stainless steel 304 PN (End) PN10 End Between flange Contact sealing Nitril Operating system Handwheel rising stem ...
TECOFI
DN: 50 mm - 1,000 mm
Pressure: 2 bar - 10 bar
Temperature: -10 °C - 90 °C
... The Flange threaded ball valve is designed to replace the conventional multiple- valves connections. It has a lifting and twisting body with non rising hand wheel. This valve has complete crossing ...
SFERACO
DN: 60 mm
... male thread 2.5" NST-NH. Metal-seated valves will not guarentee total waterproofness. Maximum working pressure: PN16 Valve type: gated valve Operation: by flywheel Material: aluminium alloy Coating: ...
DN: 40 mm - 1,600 mm
Pressure: 2.5 bar - 100 bar
Temperature: -10 °C - 200 °C
... at the request of customers . The gate valve body is made of cast steel and it is suitably dimensioned to assure a high safety factor. The thicknesses are always higher than the mini-mum ones established for GATE ...
DI NICOLA INFINAM
DN: 150, 200, 250 mm
Pressure: 1 bar
Temperature: 100 °C
... Knife gate valves for isolating the flow of free-flowing dry powders and granules. This single-cylinder version features a self-cleaning blade that prevents accumulation of the product during opening and closing. The ...
COMAV
DN: 50 mm - 600 mm
Pressure: 16, 10 bar
... characteristics are essential for gate valves. We have therefore incorporated our many years of experience into developing our E3 gate valves to give them the finishing "Made for Generations" ...
Hawle
DN: 2 in - 30 in
Pressure: 100 bar - 420 bar
Temperature: -29 °C - 540 °C
... - Unique feature: The body-bonnet joints seal improves as the internal pressure within the valve increases. - Adopt high pressure and high temperature applications, proven over years of service in conventional thermal and nuclear power ...
Athena Engineering S.r.l.
Pressure: 16 bar
Temperature: 150 °C
... affected by the solid substances, through which may hinder the flow, unlike butterfly valves. Therefore, it is a preferred valve type for impure fluids. Truevalve Knife Valve Body Material: AISI304 ...
Ekin Industrial
DN: 0.25 in - 2 in
... Series Gate Valves are bi-directional Valves ideally suited for on-off duties. Flapcon Produces various type both with parallel face Gates or with wedge Gates. These ...
FLAPCON VALVES AND AUTOMATION SYSTEMS CO LTD
... resistance Robust gate mechanism for reliable shutoff Designed for minimal pressure drop when fully open Available with various end connections for easy system integration Specifications : Material: Stainless Steel Type: Gate ...
DN: 2 in - 54 in
Pressure: 150, 100 psi
... DeZURIK KGN Knife Gate valves are available as a bi-directional resilient seated valve or a unidirectional metal seated valve.KGN-RSB Bi-Directional Resilient Seated Knife Gate ...
DeZURIK
... Overview CRANE® bronze gate valves have stood up to commercial and industrial services for more than a century. ...
DN: 40 mm - 700 mm
Pressure: 16, 10 bar
Temperature: -10 °C - 70 °C
... INFINITY gate valve F4-F5 DN40-700 PN10/16 INFINITY gate valve _INIFINITY and its new wedge and stem technology ensures smooth functionality with outstanding low torque ...
Belgicast
DN: 15 mm - 300 mm
Pressure: 125 psi - 900 psi
... manufacturing, exporting and supplying of Bolted Bonnet Gate Valve in India. This Gate Valve is highly preferred in the market and considered as the best alternative to Stainless Steel ...
Marck And Care Engineers Ltd.
DN: 40, 300 mm
Pressure: 10 bar
Temperature: -10 °C - 150 °C
... Cast iron (GJL 250) PN 10 gate valve flat body inside screw stainless steel (AISI 304) trim 150°C (max) Main characteristics • Manufactured in Italy in accordance with EN 1171 • Face-to-face length according to EN ...
MARAN E PERACINI
Pressure: 2,500 Pa
Temperature: 0 °C - 90 °C
... GATE VALVES Size:1/2‘’-4‘’ [Technical Specification] Material Normal Brass; CW617N;DZR Working Pressure PN25 Application Water Working Temperature 0℃-90℃ ...
Zhejiang Italy Copper Company
DN: 15 mm - 100 mm
Pressure: 16 bar
Temperature: 120 °C
... Brass gate valve Novo • - Non rising stem, solid wedge, screwed ends • - Used for water, petroleum • - Green color handwheel • - BS 21 / ISO 228-1-2000 threads standard • - Max working pressure: 16 bar ~ 16 kg/cm² • ...
DN: 40 mm - 700 mm
Pressure: 16, 10 bar
Temperature: -10 °C - 70 °C
... INFINITY and its new wedge and stem technology ensures smooth functionality with outstanding low torque values. New guiding system for the wedge with male composite sliding skate in order to easily achieve the 2500 cycles enurance test required by European ...
DN: 2.5 in - 16 in
... wheel. The non-rising stem flange x flange gate valves are available in 2 ½” – 16” and the non-rising stem push–on and mechanical joint gate valves are available in 2 ½” – ...
DN: 400 mm - 2,000 mm
... the upper part of the penstock to the right or to the left, the shield of the penstock rises or lowers, changing in this way the clear opening. PRINCIPAL ADVANTAGES Strong construction, penstocks completely ...
... The VGP slide valves are valves designed for heavy and particularly stressful applications. They are normally installed under hoppers, silos and tanks. Driven by pneumatic actuators, the run of the lens is guided ...
Pressure: 0 Pa - 2,000 Pa
Temperature: 0 °C - 1,000 °C
... As for industrial round valves, square valves are also designed taking into account the pressures and temperatures of use. The industrial square valves do not have a standard dimension, the Rimor technical ...
Rimor
... Viton® O-Ring Sealed Gates Stainless Steel Construction Manual & Electropneumatic Operation ...
DN: 8, 10, 12 in
Pressure: 10 bar
Temperature: 0 °C - 120 °C
... A wedge gate valve is a type of valve that is widely used in many industries - its main purpose is to start or stop a fluid flow rather than to regulate it. The design of the wedge gate ...
SIMPLE VALVE, S.L.
6 expert tips
Prioritize valves with extended service intervals to reduce the long-term financial burden of frequent downtime and component replacement.
Select low-leakage packing designs to meet international environmental standards and avoid costly regulatory fines in chemical processing plants.
Verify standardized dimensions to ensure seamless replacement and minimize modification costs during critical infrastructure upgrades or maintenance shutdowns.
Demand mill test reports to confirm alloy purity and ensure the hardware can withstand the specific corrosive environment.
Calculate the necessary torque for automated systems to prevent actuator overload and ensure reliable remote operation during emergencies.
DN: 50 mm - 250 mm
Pressure: 0.4 bar - 3.1 bar
Temperature: 0 °C - 60 °C
... Ideally suited for flow control using minimal piping space. Easy to open and close. Light weight. Specially indicated for swimming-pools and spas. TPV Gaskets. ...
the best suppliers