Globe valves

DN: 15 mm - 200 mm
Pressure: 16 bar
Temperature: -20 °C - 350 °C

... The KTN 423f is our globe valve with bellows connections DIN . Carbon steel body, it has an anti-leakage stem and a non-ascending shaft, it has gasket and spiral-wound graphite gaskets. Lubricator for lubrication of the ...

DN: 0.75 in - 2 in
Pressure: 0 bar - 10 bar
Temperature: -5 °C - 60 °C

... rangeSee table Temperature rangeFluid : -5ºC to 50ºC (no freezing) Ambient : -10ºC to 50ºC Materials in contact with mediaMain Valve: Reinforced Nylon 6 Diaphragm: NBR, FPM (Viton®), EPDM, Polyurethane ...

... Manifold valves stack multiple hydraulic valves on different levels of a single valve assembly according to the hydraulic principle diagram to achieve a variety of functions through an internal oil passage. ...

DN: 19.05 mm - 203.2 mm
Pressure: 1.2 bar
Temperature: 150 °C

... Vacuum Angle valve is one type of the poppet valves. When the poppet is moved toward the top of the valve, the internal body cavity is open to the system, and flow is unimpeded (maximum conductance). ...

DN: 25 mm - 300 mm
Pressure: 69 bar
Temperature: 540 °C

... The SMS-7100 direct spring operated pressure relief valves has been designed to protect against excess pressure steam boilers and to provide superior performance. These valves are designed and manufactured according ...

... operation is accomplished by using the geared limit switch and the torque switch inside the Limitorque, to move the poppet valve. The rotary vane air motor is compact and powerful. SMBA is ideal actuator for the use in areas not suited ...

... This type of valve is used to throttle (regulate) the fluid flow. Globe valves can also shut off the flow, but for this function, gate valves are preferred. A globe valve ...

DN: 15 mm - 100 mm
Pressure: 63 bar - 160 bar
Temperature: -60 °C - 130 °C

... Top-guided straight-through high-pressure valves The powerful high-pressure valves of the 2060 series are used for controlling fluids, gas and steam. Made from cast steel, high-temperature steel or stainless steel, they ...

Pressure: -1 bar - 10 bar
Temperature: -20 °C - 200 °C

... In-line Valves • Extracts a liquid sample from pipeline. • Installed on Horizontal or Vertical pipeline. • Sample is representative. • All wetted parts are made from corrosion resistant materials. Materials of Construction • ...

DN: 15 mm - 100 mm
Pressure: 0 bar - 16 bar
Temperature: -40 °C - 200 °C

... Fully lined process valves for shut-off or throttling of corrosive, abrasive liquid or gaseous media. Main features • Two-piece body made of cast steel, top entry • Dynamic, maintenance-free shaft sealing acc. to TA-Luft • Cavity-free ...

DN: 25 mm
Temperature: 110 °C

... Seat valve 25, made of stamped brass. With 110º output and 1 “threads. ...

DN: 25 mm - 150 mm
Pressure: 16, 10 bar
Temperature: 300 °C

... •The rising opening system breaks the sediment or crystallized layer on the bottom of the tank. •Mechanized in high alloy stainless steel. Specifications •Quality: ASTM A.351 Gr. CF8M (316). •Closing: Metal - Metal. •Control: Hand by wheel. •Stem ...

DN: 15 mm - 300 mm
Pressure: 16 bar

... STANDARDS OF MANUFACTURE EN 1074-1 VALVES FOR WATER SUPPLY EN 1074-5 REGULATING VALVES EN 558 (DIN 3202 F1) FACE TO FACE EN 1092-2 DRILLING FLANGES MATERIALS BODY EN GJL-250 CAST IRON EN 1561 COVER EN GJL-250 ...

Pressure: 46 bar
Temperature: -40 °C - 120 °C

... the oil receiver and drained out to the suction line via the differential valves. Maximum working pressure: 46 bar HCYCT: 4 models of non adjustable differential valves with set pressures of 0.35, 1.4, 3.5 and ...

DN: 15 mm - 300 mm
Pressure: 16 bar - 250 bar
Temperature: -50 °C - 130 °C

... more quite than a traditional globe valve. N20 valves are available with an open window cage (for plug balancing purposes only), single, double or a triple cage (for low noise purposes only) Valve ...

Pressure: 0.5 bar - 16 bar

... semi-automatic drain valves, fully automatic externally fitted drain valves A or B, and fully automatic internally fitted drain valves) can be mounted as an option. Manual Drain Valves Manually ...

DN: 50 mm - 900 mm
Temperature: -29 °C - 800 °C

... Model:Cast steel globe valves 900lb •Brief description: •Series CSGLV-4 are used to cut or connect the pipe media under nominal pressure Class 900lb, working temperature -29 to 800 degrees in industries including ...

DN: 0.5 in - 2 in
Temperature: -20 °C - 130 °C

... Balancing valve, in dezincification resistant brass with threaded connections, for the flow rate regulation in heating systems. ...

... making the primary seal on the precision formed tapered seat. For replacement Viton® O-ring Kit, see R110112.0-12mm high vacuum valve(T-Type) Accessories: S540012 0-12mm high vacuum plug and control knob Viton® O-ring at tip 42.05 ...

DN: 50 mm - 300 mm
Pressure: 50 bar
Temperature: -29 °C - 425 °C

... bonnet -TRIM 8 - A410 + stellite Gr. 6 seat - Bolted bonnet & gland pack - Rising stem & non rising handwheel for gate & globe valves - PS: 20 bar (ANSI 150), 50 bar (ANSI 300) - TS: -29°C/+425°C. Body material ASTM ...

DN: 0.5 in - 8 in

... Globe straight-way series is a very versatile control valve for the main applications. Its high performance derives from using a balanced and cage-guided plug. ET series is particularly suitable for heavy duties and for ...

DN: 0.375 in - 2.5 in
Pressure: -0.9 bar - 16 bar
Temperature: -20 °C - 80 °C

... FARBO, ever following the best performances, renews a new pneumatic globe valves series. Cheaper and compact, they allow to reduce encumbrances and costs. Available with brass body, as standard they are supplied with ...

DN: 15, 22 mm
Pressure: 25, 16 bar
Temperature: -10 °C - 130 °C

... Fixed orifice DZR brass double regulating valveDiameters from DN015 - ½" to DN050 - 2"Threaded F/F (ISO 228/1 for DN15 and DN20, ISO 7/1 Rp above)Olive & nut kit (O/N) for European copper tubing (EN1057) on request: ● DN015, kit for 15 mm pipe ● DN020, ...

DN: 150 mm
Pressure: 20 bar
Temperature: -29 °C - 120 °C

... We Provide ASTM A216 WCB Globe Valves, ASTM A216 WCB Globe Valves, Class 150 LB, PN20, 6 Inch, DN150, API 6D, ASME B16.10, API 598. Standard: API 6D. Material: ASTM A216 WCB. Face ...

DN: 6 mm - 50 mm

Pressure: 400 bar

... SCHROEDER automatic recirculation valves (ARC) for minimum flow to protect centrifugal pumps. To ensure minimum flow through the pump during operation at low flows. Also called minimum flow valves, ARC valves, ...

DN: 2 in - 20 in
Pressure: 16 bar - 160 bar

... Certificate:EN 10204 type 3.1 Markings: MSS SP 25 Related product Tag: High Pressure Globe Valve Power Station Globe Valve Pressure Seal Globe Valve ...

DN: 15 mm - 200 mm
Pressure: 40 bar

... Bolted yoke bonnet. • Rising stem and handwheel. • Stainless steel or PTFE sealings. • Distance between sides according to DIN 3202 F-1. ...

DN: 10 mm - 50 mm
Pressure: 16 bar
Temperature: 200 °C

... high thightness (leakproofness class - A acc. EN -12266 - 1) compact settlement environment-friendly tests acc. EN - 12266 -1 Aplications hot cold and cooling water plants low-pressure steam plants industrial technologies heat ...

DN: 25 mm - 200 mm
Pressure: 400,000 Pa - 600,000 Pa
Temperature: -40 °C - 120 °C

... Cost-effective valve with throttling performance Backflow Prevention. ...

DN: 15 mm - 600 mm
Pressure: 1.6, 2.5, 4, 6.4 MPa
Temperature: 200 °C

... Stainless steel globe valve series products are mainly used to cut off (or connect) the pipeline medium. It is suitable for nitric acid, acetic acid and other occasions in chemical industry and other industries. This ...

Pressure: 16 bar - 40 bar
Temperature: 300 °C - 450 °C

... EBSV Bellow sealed valves have been designed in a very compact settlement and provide perfect flow control. They are manufactured in different materials suitable for various applications including steam and industrial water. ...

DN: 0.5 in - 48 in
Pressure: 600 psi - 15,000 psi

... Pressure balance lubricated plug valves are metal seated valves providing a tight shut off ( 0 leakage ) sealing, valves shall be regularly lubricated along with their operation by injection of suitable ...

DN: 25 mm - 100 mm
Pressure: 10 bar
Temperature: -10 °C - 140 °C

... The INNOVA N-Type valve is a pneumatic shut-off seat valve for hygienic applications. The valve is authorized to carry 3-A symbol. Note: Consult the options of the valves authorized ...

DN: 25 mm
Pressure: 16 bar
Temperature: 0 °C - 300 °C

... Flange- Globe valve DN 25 in straight through with bellow flange acc. DIN EN 1092 material grey cast iron DN-JL1040 with Isolation plug seal: - metal design: - straight through with bellow body material: - grey ...

DN: 8, 6, 12 mm
Pressure: 0 Pa - 35,000,000 Pa
Temperature: -30 °C - 51 °C

... Single conterbalance valves with regenerative function. Flow range from 1 to 160 liters / min. Max calibration pressure 350 bar. Assembly with in-line manifold or CETOP3 flanging, in steel or aluminum material. ...

... /T, Western Union, MoneyGram Supply Ability: - 10000PCS/Mouth J41 J941russian standard cast steel globe valve and motorized globe valve price Structural Features: · ...

DN: 0.5 in - 2 in
Pressure: 16, 12.8 bar
Temperature: 120 °C - 200 °C

... Vatac Globe Control Valves covering pressure control and flow control valves, and are designed and manufactured to ensure leakage of less than 100 ppm (parts per million) of volatile organic compounds. ...

DN: 2 in - 12 in

... Cast Steel Globe Valves Sizes: 2” - 12”Pressure: Cl. 150 - Cl. 2500Materials: Carbon and Alloy Steels,Stainless & Duplex SteelsEnds: Flanged, ButtweldOptions: Handwheel, Gear orMotor operated.Straight & Angle TypeBellow ...