Guide bushings

Outer diameter: 5 mm - 42 mm
Inner diameter: 2 mm - 30 mm

... offer a wide assortment of standard machine elements made from aluminum, steel and plastic. Currently, Ganter offers steel guide bushes and many more positioning elements in different sizes and versions.

Outer diameter: 10 mm - 15 mm
Inner diameter: 6 mm - 10 mm

Guide bushings GN 179.1 with conical bore will be used for the latch bore of indexing plungers GN 817.5.

... with high precision guides in order to achieve an extremely narrow cutting gap. With a high contact surface for needle rollers, our Guide Unit Million Guide is best suited for this ...

Outer diameter: 7.92 mm - 20.51 mm
Inner diameter: 7.5 mm - 19.5 mm

Dowel bushings are used to locate components in conjunction with bolts which pass through the inside of the bushing after it has been installed. Separate holes for locating pins are eliminated. The ...

Outer diameter: 6.004 mm - 16.018 mm
Inner diameter: 5.8 mm - 15.7 mm

SPIROL Ground Hollow Dowels are designed to be direct replacements for standard Ground Solid Dowels per ISO 8734. They are used where centerline tolerancing and precision alignment are required. Design-in SPIROL’s Series GD100 Ground ...

Outer diameter: 5.85 mm - 11.7 mm
Inner diameter: 6.3 mm - 12.5 mm

Spring alignment dowels are used to accurately locate components with respect to each other. They are formed around arbors to assure roundness. It is recommended that one half the hole tolerance be used for the fixed location of the ...

Outer diameter: 25 mm - 1,400 mm

The 14K series is a guide bushing, manufactured by A.W. Chesterton Company. This product is ideal to use in rotary equipment to create a barrier between the sealing device either in the stuffing box or ...

Outer diameter: 11 mm - 65 mm
Inner diameter: 8 mm - 50 mm

Guide bushes bronze, maintenance-free Material: Bronze with graphite inserts. Version: Self-lubricating. Hardness 190-220 HB. Note: The guide bushes are radially and axially applicable. The bearing ...

EVERYTHING'S A MATTER OF THE RIGHT SETTINGS Spieth guide bushings – round guidance and clamping with adjustable play – open up new dimensions for modern, efficient, and economical machine designs with ...

Outer diameter: 7 mm - 19 mm
Inner diameter: 5 mm - 13 mm

ST7191 Guide bush smooth, Mini-series Material Steel 1.3505 (100 Cr6); hardened Hardness 64 ±1 HRC Installation instruction Secure with adhesive; do not press in Installation in mounting bore ISO ...

Outer diameter: 40 mm - 118 mm
Inner diameter: 25 mm - 92 mm

ST7416 Guide bush with shoulder Referring to DIN 9831 / ISO 9448 Material Steel 1.7131 (16MnCr5); case-hardened Hardness 64 ±1 HRC Installation instruction Fixing with 3 holding clamps; one-sided ...

Outer diameter: 45 mm - 148 mm
Inner diameter: 21 mm - 92 mm

... rectangular flange Material Grey cast irons EN-GJL-250 Guide diameter ISO H5 Note both flange surfaces machined Mounting bore ISO R6 ST7441 Guide bush Sliding guide ...

Outer diameter: 36 mm - 66 mm
Inner diameter: 20 mm - 40 mm

Ball Guidance BOLEXP ball guidance bushes are made up of an outer casing of steel for rolling, hardened and ground, which holds fixed inside a high-resistance bronze cage for guiding the balls running along the cage. The translation ...

Outer diameter: 20 mm - 91 mm
Inner diameter: 8 mm - 60 mm

Ball Guidance BOLEXP ball guidance bushes are made up of an outer casing of steel for rolling, hardened and ground, which holds fixed inside a high-resistance bronze cage for guiding the balls running along the cage. The translation ...

Outer diameter: 24 mm - 85 mm
Inner diameter: 12 mm - 60 mm

Ball Guidance BOLEXP ball guidance bushes are made up of an outer casing of steel for rolling, hardened and ground, which holds fixed inside a high-resistance bronze cage for guiding the balls running along the cage. The translation ...

Outer diameter: 35 mm - 120 mm
Inner diameter: 25 mm - 100 mm

Outer diameter: 40 mm - 140 mm
Inner diameter: 25 mm - 120 mm

Sintered bronze bushes are self lubricating, are oil coated and pressed ready-to-install. These have a H7 bore once press-fitted into rigid bearing housing using mounting hole H7. The edges are chamfered at 45°. The angle is decided ...

Outer diameter: 12 mm - 53 mm
Inner diameter: 8 mm - 34 mm

APSOparts collar bearing bush type P14 have a tinned steel sheathing. The sliding material layer is porous bronze coating with rolled-in PTFE/ZnS glide layer. It has been made with welds in a rolling direction in a butt joint way. It ...

Outer diameter: 20 mm - 60 mm
Inner diameter: 5 mm - 15 mm

The PBC-V guide wheel is a roller bearing bushing with a 303 stainless steel coating intended for its resistance form corrosion. The metric sizing was applied on the device for the matching of the four ...

Outer diameter: 37 mm - 200 mm
Inner diameter: 20 mm - 150 mm

The FDK - FDL series is a range of adjustable linear guide bushing from Spieth. The device's assembly play allows easy mounting even for large dimensions. The narrow guidance play can be configured ...

Outer diameter: 0.875 in - 7.875 in

... Straight Bushings are available in non-plated steel and graphite-plugged. Progressive Guided Ejector Bushings are manufactured from a solid alloy bronze to eliminate galling to leader ...

Outer diameter: 14 mm - 63 mm
Inner diameter: 8 mm - 50 mm

... and tool guide bushing manufactured by Rabourdin Industrie which comes with variation of models having different size and designs. For this series, it comes with different bushes which are ball guide, ...

Outer diameter: 0.187 in - 0.865 in
Inner diameter: 0.1 in - 0.6 in

Guide Roller Bushings Modern Linear Bushings are used in conjunction with our guide rollers to facilitate mounting and incorporation into a rolling carriage. The concentric ...

Outer diameter: 0.376 in - 0.877 in
Inner diameter: 0.3 in - 0.7 in

... per AMS-QQ-P-35 (Cad, or Zinc-Nickel plate optional). "T" - AT 3200 Bearing Liner System, Permanently Bonded to Bushing inside diameter. Qualified to SAE-AS81820. Options: - "T" indicates a .010" ...

Outer diameter: 98 mm - 498 mm
Inner diameter: 45 mm - 195 mm

Can be fitted to: FRB head carrying live centers with axial load distribution and FRB head carrying live centers for grinding. They can be manufactured with different angles on customer’s request.

... bore of the bushing, while the outer race is stationary in the deck of the drill, fixed in place via locating flats and/or lugs, positioned the circumference of the flange, integral with the outer race. The flange provides ...

... CU -NI- 70/30), ASTM / ASME SB 152 UNS NO C 10100, C 10200, C 10300, C 10800, C 12000, C 12200 Application: These copper bushing are demanded in different industry sectors like Chemical Industry Petrochemical Industry Pharmaceutical ...

Outer diameter: 30 mm - 42 mm
Inner diameter: 9 mm - 26 mm

... silicone filled slots. Upon request, a guide can be put into the guide bush in order to facilitate the entrance of the material. For traditional steels and brasses, the carbide guide ...

POLYLUBE® Guide Rod Bushings POLYLUBE® Guide Rod Bushings are designed as replacements for traditional metallic guide rod bushing ...