Operating pressure: 25 bar
... NITO high pressure quick coupling Optimal solution for high pressure cleaners and fixed installations. NITO high pressure fittings ...
Diameter: 4, 6 mm
Operating pressure: 250 bar
... – Fitting for the high- pressure range – Tube assembly with one movement – Release ring with integrated clamp – For tubes in various materials – Small-scale and low weight – NBR O-ring – Modular, ...
ITV
Diameter: 4, 6 mm
Operating pressure: 250 bar
... – Fitting for the high- pressure range – Tube assembly with one movement – Release ring with integrated clamp – For tubes in various materials – Small-scale and low weight – NBR O-ring – Modular, ...
ITV
Diameter: 6, 4 mm
Operating pressure: 250 bar
... – Fitting for the high- pressure range – Tube assembly with one movement – Release ring with integrated clamp – For tubes in various materials – Small-scale and low weight – NBR O-ring – Modular, ...
ITV
Diameter: 3 mm - 14 mm
Operating pressure: 20 bar
... : -20°C ÷ 70°C Working Pressure: Pressure varies depending on the kind of tubing used and in any case it never has to exceed 18 bar. Vacuum: up to 750 mmHg Application fields: Pneumatic circuits The push-in ...
C.Matic S.p.A.
Diameter: 0.156 in - 0.75 in
Operating pressure: 290 psi
... Push in fittings for Vehicles applications complying with DOT FMVSS §571.106, SAE J2494-3 e SAE J1131 specs. 1-2 > Body and Release Ring: Brass UNI EN 12164 CW614N - UNI EN 12165 CW617N Nickel Plated 3 > Holding Ring: Resin (PEI) 4 ...
C.Matic S.p.A.
Diameter: 4 mm - 14 mm
Operating pressure: 18 bar
... bottom of the fitting, the stainless steel collet grips onto it and the tube is held captive. It is then enough to press on the release ring to set the tube free from the fitting. Technopolymer Push-in Fittings ...
C.Matic S.p.A.
Diameter: 6 mm - 18 mm
Operating pressure: 400 bar
... Characteristics, specialities • high pressure resistance • easy, robust assembly due to tightening limitation • corrosion resistant • compact design • very good resistance to vibration Material Stainless steel 1.4571 ...
Diameter: 4 mm - 14 mm
Operating pressure: -0.99 bar - 30 bar
... considered an ” High Performance” line in terms of pressure and temperature. Ideal for application with high temperature and pressure up to 30 bar. Seals are FKM and ...
AIGNEP
Diameter: 1.5 mm - 27.7 mm
Operating pressure: 30 MPa
... The Snap-check monitoring system identifies your operating pressure without the need for a permanently installed gauge. The thermoplastic, high- pressure hose enables you to monitor pressures ...
CEJN
... The model 53 Socketweld fitting is designed to be socket welded directly to a 2” socket end. Possible configurations include welding to an industry standard “Sockolet” fitting, which is then welded to a pipe or vessel, ...
Rohrback Cosasco Systems
Diameter: 18, 20, 12, 16, 10 mm
Operating pressure: 1,200 bar
... Standards adaptors are also available individually. If among our standards adaptors or high pressure adaptors you don't find what you are looking for, our Design Office remains at your disposal to design and manufacture ...
AREMECA
... Rastelli Raccordi manufactures 37° fittings for flared tubes in carbon steel and stainless steel in compliance with SAE J 514/ISO 8434-2. The particular features of the SAE J 514 – 37° fittings for ducts consisting ...
Diameter: 40 mm - 250 mm
Operating pressure: 40 bar - 250 bar
... reinforced pipes, steel compression end fittings are usually considered because non-metallic fittings cannot withstand such high working pressure. When connecting RTP ...
Diameter: 19 mm
Operating pressure: 5,075 psi
... considered to represent the gold standard in both performance and resilience, but even the best can be made better. Designed to withstand extreme levels of high frequency impulses at very high pressures, ...
Diameter: 40 mm - 2,300 mm
... supply, drainage, irrigation and other fields. The steel-plastic material can withstand a maximum pressure of 1.6mpa, which is suitable for high- pressure environments. It has poor corrosion resistance ...
Diameter: 2.5 mm
Operating pressure: 0 bar - 500 bar
... Small-sized quick coupling system in high pressure hydraulics, for the transmission of fluid media in an industrial / commercial environment. Media mostly hydraulic oils other fluids Special features ...
WALTHER-PRÄZISION
Diameter: 32.5 mm - 54.9 mm
... For higher pressure applications Interpump Fluid Solutions has a full range of multi spiral fittings compatible with the IFS hose range. ...
... A secure and all-purpose hose coupling solution for high- pressure and high-temperature applications, universally recommended for steam hose connections. - This system is generally used with large ...
DIXON GROUP EUROPE
Diameter: 28 mm
Operating pressure: 21,739 psi
... within rated working pressure,to keep the flow expeditely. Special materials are used in critical parts and hardened for durability. Dependable ball-locking mechanism holds the mating halves together. Socket ...
Diameter: 4 mm - 6 mm
Operating pressure: 250 bar
... grease lubrication systems as an alternative to the regular fittings (nut+olive). The tube may be connected and disconnected repeatedly, and it will not affect the tube's performance. The fitting and the sealing capabilities ...
Diameter: 40 mm - 225 mm
Operating pressure: 10 bar
... characterised by their high- pressure resistance. Branches less than 45° enable high flexibility when integrating them into a piping system. This is further increased through directly available reducers ...
Reinert-Ritz GmbH
Diameter: 0.38 in
... Brass "T" joiner for use with 3/8" high Pressure Nylon tube. Simple "Push Fit" design enables easy assembly. Can be re-used. ...
CoolMist Systems Australia
Diameter: 35 mm
Operating pressure: 75 bar
... Our 812 series are high quality, quick action bayonet style couplings. They are designed for high pressure compressed air or inert gas. Advantages High flow ...
... High pressure Swivel Joint is a kind of pipe fitting used for high pressure pipe turning at different angles. In all the pipe fittings used in high- pressure ...
Diameter: 0.19 in - 2 in
... The new KA range of fittings and ferrules have been released to enhance the current range of KA high performance hoses. The new range has been fully tested and validated in our Automotive test laboratories at 204°C (400°F) ...
Diameter: 1, 2, 3 in
Operating pressure: 150 psi
... interlocked. Double Safety System. Cannot be opened unless connected to mating fitting. Optimal flow. Less obstructions provide better flow characteristics in high- pressure or viscosity ...
OPW
Diameter: 8, 6, 12, 9, 16 mm
Operating pressure: 0 bar - 450 bar
... industry Specification Automatically one hand connection - disconnection Flat face Non spill Ball locking type For High pressure High flow ...
RTC Couplings GmbH
Diameter: 6 mm - 38 mm
... The CAST S.p.A. fitting according to the norms ISO 8434-2/ SAE J514, is a mechanical fitting traditionally used for high pressure oleo-dynamic systems. The sealing is made by the contact ...
CAST spa
the best suppliers