HSK chucks

What is MHD? A modular toolholder system for boring, milling, drilling, tapping. A rigid high precision system, conceived and manufactured with the most advanced design and production facilities, backed by an experience over many decades ...

What is MHD? A modular toolholder system for boring, milling, drilling, tapping. A rigid high precision system, conceived and manufactured with the most advanced design and production facilities, backed by an experience over many decades ...

What is MHD? A modular toolholder system for boring, milling, drilling, tapping. A rigid high precision system, conceived and manufactured with the most advanced design and production facilities, backed by an experience over many decades ...

The Hollow Shank taper (HSK) is a monoblock adapter preventing inaccuracy of rotating mechanical systems with the use of its taper tolerance. This product helps to create a high torque transfer rate by simply because ...

KOMET DIHART DAH® compensating holders are static compensating systems, while DPS floating holders are dynamic compensating systems. Axis and concentricity errors are compensated for extremely simply. Using the patented KOMET DIHART ...

... synchronous tapping chucks fix measurement discrepancies brought by the backlash and produce the necessities to attain high tapping productivity. This can function with internal cooling and an MMS 1 channel system, thus ...

Clamping range: 32 mm - 80 mm

Damping components with Abs® connection point comes with machining apparatuses, if certain length/width degrees are surpassed, depending upon the material and cutter being utilized, this may cause undesirable vibration in the device. ...

The efficient CNC programming, intelligent workpiece holding and fast linear drives enable multi-spindle machines to be used for smaller batch sizes as well as the larger production volumes in turbine blade and bucket component manufacturing ...

Automatic locking system tool holders for high speed The tool has to be plugged by hand. To block it, just turn it by hand, clock wise; to unlock it, just turn it anti clockwise.

Clamping range: 3 mm - 9 mm

APPLICATION Tapping chucks for handheld and stationary machines. TECHNICAL FEATURES With conical mount for clockwise and counterclockwise rotation All around 15° deflection of the tap tool possible Simple handling Heavy-duty ...

... production. The modular set-up allows the length adjustment of threading tools with male or female centered tool shanks. The HSK shank adaptation to the machine spindle can be adjusted for 1- and 2-channel minimum quantity ...

Application on machines with synchronous spindle The threading tool is pitch-controlled by the synchronous spindle; eventually arising axial forces caused by synchronisation faults are minimized by a patent-protected minimum length compensation ...

Application on machines with minimum-quantity lubrication (MQL) Flow-optimized transfer of the MQL medium from machine spindle to threading tool.

Bring together similar or diverse machining operations to reduce operating times (usually involves multi-spindle heads). The potential applications are virtually limitless: Drilling, threading, counterboring, reaming, milling, etc. The ...

Rotational speed: 1,200 rad.min-1 - 10,000 rad.min-1

The FH series is a unit manufactured by Xebec Technology. It is a floating tool header intended for mass production line. It has a brush life that can be added up to 4 times. Further, it has also a process management that can be revised ...

The HSK series is manufactured by Rebo, and is gripper that is ideal for use in clamping operations. The unit is protected from various objects such as wood, silica powders, corrosion, cuffing, and as well as chatters. ...

To offer our customers a complete range of solutions, TDM SA supplies the following: auxiliary units, ISO and HSK interface cones, tool holder cones, extensions and collets with clamping nuts. They are optimized to be ...

TOOL HOLDER HSK63F Tool holder HSK63F with tollerance between the tool holder and tool house 0,003 mm. Category: Tool holders and sleeves

AEM 8039 TOOL HOLDER HSK63F DIN 6388 FOR COLLECT EOC Suitable for Homag, Eima from 9/94, Dubus, Weeke, Biesse, SCM, Morbidelli, Masterwood. Nut with bearing for tools with left or right rotation. Category: Tool ...

TOOL HOLDER HSK50F Tool holder HSK50F with tollerance between the tool holder and tool house 0,003 mm. Category: Tool holders and sleeves

... demanding Aerospace components and applications. The X-Treme Chuck provides the largest gripping force available from any tool holder currently available in the market on NBT50 (dual contact), HSK and ...

... the drill chuck and for higher speed or heavy duty applications can detach from the base holder. The NC drill chuck incorporates an internal captive design or 'solidifying' bolt system which 'in effect' ...

... head on different shanks Features V Flange BT Flange DIN 69871A DIN 2080 Morse Taper NMTB Taper HSK

... protection, and holder systems that comply with international standards. Other features of the TOOL BOY Fitting Clamps include HSK tool holders, all standard versions, and Capto tool holders that can quickly be clamped. ...

Clamping range: 32 mm - 125 mm

... repetitive accuracy when exchanging the tools. In the DIN 69893-1 HSK-A interface design an additional torque transmission takes place at the taper shank with drive keys. DIN 69893 HSK-A/HSK-E/HSK-F ...

Clamping range: 10 mm

The ISO 26623 spindle interface is an innovative modular tooling system with maximum precision and particularly widespread in multi-task machines (turn-mill centres). The torque transmission and centring takes place via the polygon-shaped ...

Clamping range: 16 mm - 50 mm

Material Case-hardening alloy steel. Case-hardened and tempered. Minimum strength in core 880 N/mm2. Surface hardness Rc 57 ÷ 60

... an economy price with the unique precision chuck from centaur. Centaur world class quality HSK Collet Chucks are available in the 63A size from stock. Collet ranges RD\ER 16-40. All ...

ISCAR introduces new HSK, BT DIN69871 and CAMFIX tapered shanks with SRKIN-CX chucks; each type offers several protruding lengths for 6 to 32 mm tool diameters.

Clamping range: 3 mm - 20 mm

Kennametal HSK shank tools have been designed for rotating and multi-tasking or complete machining. They require minimal time for changing over and provide high accuracy and stability. A variety of models are available ...

Clamping range: 21.5 mm - 40 mm

The Anti-vibration Arbor is a modular arbor manufactured by Hitachi. It offers superior efficiency operation through its minimized chattering vibrations, durable machining, and improved productivity through its damping effect. Additionally, ...

The MEGA Micro Chuck is manufactured by KAISER Precision Tooling Ltd. This drilling chuck is especially designed for CNC machines. Its body's slim design and nut allows excellent balance and concentricity. This ...

The tool for complete machining Efficient production processes through an optimised cooling supply Thanks to the unique coolant hole construction from CERATIZIT, jets of coolant are accurately focused onto the cutting edge. The efficient ...

Clamping range: 32 mm - 100 mm

... tool assembly with different designs and lengths and reduces or extends adaptors regardless of the machine’s interface (SK, HSK, Big-Plus).

... various combinations of tool holder and tap holder offers ideal projection lengths for any machine. Available in BCV, BBT, HSK, KAB & BIG Capto interfaces.