{{#each product.specData:i}}
{{name}}: {{value}}
{{#i!=(product.specData.length-1)}}
{{/end}}
{{/each}}
{{{product.idpText}}}
{{#each product.specData:i}}
{{name}}: {{value}}
{{#i!=(product.specData.length-1)}}
{{/end}}
{{/each}}
{{{product.idpText}}}
Clamping range: 12.4 mm - 22.4 mm
... Rigidity Pull-back design draws workpiece securely against a part locator for 'dual-contact' rigidity. Modular Design All Mandrel models have a common flange configuration, enabling full interchangeability with all back ...
Clamping range: 12.4 mm - 22.4 mm
... change the machine's three jaw chuck or collet chuck. These models utilise the same precision mandrels, expanding sleeves and locators as our CNC Expanding Mandrels. Side-actuated with an included square-drive ...
Mandrel collets Material: Mandrel mild steel. Taper-head screw low-carbon steel Version: Mandrel black oxidised. Taper-head screw case-hardened. Note: The mandrel ...
Clamping range: 32 mm - 82.5 mm
Expanding Sleeve Mandrels HDDS as Complete Clamping Fixture Features • For clamping diameters from 22 mm to 82,5 mm • Excellent suitability for the clamping of workpieces to gearing processing works • High true ...
RINGSPANN
Taper Collet Flange Mandrels BKDF as Complete Clamping Fixture Features • For clamping diameters from 11,9 mm to 132 mm • High true running accuracy ≤ 0,01 mm • Permissible component tolerance up to IT15 • Pull-back ...
RINGSPANN
Taper Sleeve Flange Mandrels HKDF as Complete Clamping Fixtures Features • For clamping diameters from 9 mm to 275 mm • High true running accuracy ≤ 0,01 mm by HKDF 4 up to HKDF 125 ≤ 0,015 mm by HKDF ...
RINGSPANN
Clamping range: 12.5 mm - 178 mm
... also available for clamping profiled, internally toothed, stepped or conical work pieces. Highlights • Expansion of mandrels of 0.8mm • Suitable for automatic loading • Repeat clamping accuracy less than 0.012 ...
Clamping range: 220 mm
Rotational speed: 500 rpm
... the internal gearing · Efficient change-over of the clamping pins · Exchangeable axial end-stops · Simple change of the mandrels on the basis of a pneumatic interface · Pneumatic check for workpiece presence · Actuation ...
Clamping range: 32, 46, 92, 115, 138 mm
APPLICATION Internal clamping of round workpieces. Turning, milling, grinding and toothing operations, as well as for balancing and measuring. Ideal for clamping in through holes. TYPE Force-actuated. CUSTOMER BENEFITS Short ...
Clamping range: 26 mm - 149 mm
APPLICATION Internal clamping of round workpieces. Turning, milling, grinding and toothing operations, as well as for balancing and measuring. Suitable for short clamping lengths and very small clamping diameters starting from 10 mm. TYPE Force-actuated. CUSTOMER ...
To balance tools with cylindrical bore Precise centrically clamping for highest repeatability Fine balanced to < 1 gmm Individual useable
Clamping range: 12 mm - 130 mm
SIAM RINGSPANN
The N.A. Woodworth Tork-Lok collet line offers flexibility and affordability, with much of the product available from stock. The Tork-Lok Arbor locates straight and tapered holes on true center within .0005 T.I.R. These arbors feature ...
Clamping range: 12.5 mm - 32 mm
Hand or Power Operated Expanding Mandrels Size Range: 14.7mm - 129.7 mm Large Expandability (1 - 2mm, depending on size) Flange Mounting Very Rigid Design EM-A Expanding Mandrels feature high accuracy ...
SMW AUTOBLOK
Rotational speed: 5,400, 6,000, 5,500, 5,000 rpm
... or jaw clamping – it's easy with the B-Top3 modular system. Everything fits together. With the MANDO Adapt segmented mandrel, you can change to perfect I.D. clamping in less than 2 minutes. The SPANNTOP adaptation ...
HAINBUCH
Use: turning, grinding, balancing and inspection operations High degree of expansibility 1.5 to 5 mm depending on the diameter of the sleeve Possibility to clamp worpieces with diameters ranging from 8 to 235 mm Clamping takes place as ...
TOBLER
Clamping range: 18 mm - 105 mm
Rotational speed: 0 rpm - 5,000 rpm
The cone expanding mandrel CenterGrip is designed without a draw bolt making it possible to clamp the whole length of blind holes. The 6-segmented sleeves (CG30 = 3 segments) depends on the reliable Rubber-Flex® vulcanising ...
Segment clamping mandrels have a relatively large clamping stroke, unlike slide bush clamping mandrels, for example. They can be used universally for centring or clamping. We have already realised clamping ...
Internal clamping sleeves with double taper are suited to internal clamping of pre-machined parts. Because these have tapers and slots at both ends, the clamping sleeve is able to open in various different ways and securely hold workpieces ...
Mandrels and tooling from Bates Technologies are designed and engineered on state-of-the-art CAD and CAE systems for a variety of applications for all honing machines. Our repair and reconditioning services ensure optimum ...
SPECIFICATIONS Need Specifications FEATURES & BENEFITS Need features and benefits ADDITIONAL INFORMATION Sunnen CR Mandrels are used for rod reconditioning. These honing units will produce a round and straight ...
Remote actuator mounting can be achieved using valve extension spindles or pedestal adaptors. Lengths can be from 500 mm to 8 metres, (20" to 300") in stainless steel or carbon steel. • Underground applications • Customer specified ...
... clamping mandrel can be machined to the required seating diameter (e.g. by turning/milling). It must be noticed that before machining the centering clamping mandrel, it will be expanded approx. 0.1 mm ...
Indispensable instruments for shaping or forging, even on hot process, chains and necklaces, so that they can fit perfectly to the person’s neck or breast. Available in two sizes satin-finish.
Please specify:
Help us improve:
remaining