ISO fittings

Diameter: 16 mm - 110 mm
Operating pressure: 12.5 bar - 16 bar

... hot water application. NORMA® products are made in factories certified under ISO 9001 Version 2008. NORMA® fittings are tested and approved according to these standards: ISO 14236 (Czech Republic). ITC ...

Diameter: 6, 4, 8, 10 mm
Operating pressure: -0.99 bar - 15 bar

... Minimum Temperature -15 °C Maximum Temperature +225°C Threads Tapered gas in conformity with ISO 7.1, BS 21, DIN 2999. Parallel gas in conformity with ISO 228 Classe A. "Short" tapered trhead. Working Pressures Minimum ...

Diameter: 8, 11, 5.5 mm
Operating pressure: 8 bar - 12 bar

... design requirements. Serie 291 has an easy and safe connection/disconnection and complies with ISO 4414 (safety standard). The nipple profile complies with ISO 6150 C. Technical data Material coupling - Steel ...

... procedure • AUTOMATIC TIGHTENING LIMIT: contact between AR3-FORM® ring and fitting body because of the nut tightening effect compels the operator to stop tightening • CUTTING RING FITTINGS INTERCHANGEABILITY: new AR3-FORM® ...

Diameter: 0.125 in - 0.5 in
Operating pressure: 150 psi

... Bimba’s composite fittings are ready to use, allowing easy, tool-free assembly and providing optimum flow. Straight fittings feature internal and external hexagons to reduce fatigue. Releasable stainless-steel grab rings ...

DAYU Irrigation Group Co., Ltd. was established in 1999. It is a national high-tech enterprise based on the Chinese Academy of Water Sciences, the Science and Technology Promotion Center of the Ministry of Water Resources, the Chinese Academy of Sciences, ...

Diameter: 10 mm - 63 mm
Operating pressure: 10 bar

... Designed for usage of 25 years with media water and 20°C media temperature Due to: ISO 727, DIN EN ISO 1452, DIN EN ISO 15493 and ISO 7-1 Optimized for the process of dry ...

... Certification : DIN ISO 9001 - 2000 Quality : 3D tactile measuring – 3D scanner – Test – Certificates ... Material Certification : Forging Material according EN 12420 & EN 12165 Material : All Brass types , Copper , Nickel ...

Diameter: 10 mm - 353 mm
Operating pressure: 10, 16, 5 bar

... RAL 7024. • Dimensions: Socket fittings according to EN 1452-3. Threaded fittings according to ISO 7/1. • For tubes according to EN 1452-2. • Socket fittings: we recommend solvent ...

Diameter: 9, 6, 11 mm
Operating pressure: 0 bar - 12 bar

... compressed air safety allow a removal of the thru type adaptor only after completed reduction in pressure according to DIN EN ISO 4414. Thus, the dangerous „whip effect“ is excluded during disconnection. Materials: coupling housing: ...

Diameter: 20 mm - 155 mm
Operating pressure: 5 bar

... steel transition fitting with threaded terminal. Made by injection moulding, it is used for connection of different materials (one of which is polyethylene) on fuel gas piping systems. - **Materials** - Carbon steel tubing according ...

Diameter: 6 mm - 25 mm
Operating pressure: 35, 42 MPa

Diameter: 2 in
Operating pressure: 16 bar

... ductile iron, epoxy powder coated • With external thread 2" according to EN 10226-1 • With internal thread according to ISO 228 ...

Diameter: 6 mm - 25 mm
Operating pressure: 250, 270, 325, 350 bar

... Area On hydraulic oil circuits Hydraulic test units Injection moulding industries / core pullers Interchangeability ISO 16028 ...

Diameter: 20, 24.5, 33 mm
Operating pressure: 16 bar

... Connectivity standard External thread GAS cylindrical ISO 228/1 Connectivity standard Bucchi srl for pipe fittings adopts as standard connection ISO 228/1; in order to improve hydraulic seal has ...

Diameter: 0.25, 0.375, 0.5, 0.75, 1 mm
Operating pressure: 5,000, 4,000, 3,000 psi

... stock. ·New Chrome plating treatment provides advanced anti-rust performance ·LSQ-ISOA series conforms to the standard of ISO 7241-A ·Compatible with PARKER 6600 Series,FASTER ANV Series, AEROQUIP 5600 Series and HANSEN HA 15000 Series ...

Diameter: 0.18 in - 0.75 in

... CW614N CW602N CZ132 C35330 Any Special Brass Material Composition As Per Customer Requirements Material ISO Metric (MM), (UTS), (UNC), (UNEF), (NPT), (BSP), (BSPT), (BSW), (BSF), (BA) Any as per customize Specification. Finish ...

Diameter: 18 mm - 108 mm
Operating pressure: 0 bar - 16 bar

... stainless steel pipes 304/1.4301 diameters 18mm to 108mm are compatible with other fittings 18mm to 108mm in material 304/1.4301, 316/1.4401 or 316L/1.4404. AQUApipe press fittings 304/1.4301 diameters 18mm to 108mm ...

Diameter: 40 mm - 225 mm
Operating pressure: 10 bar

... quality assurance system in accordance with DIN EN ISO 9001. For all fittings a certificate in accordance with DIN EN 10204 must be submitted by the manufacturer. Depending on its dimensions, the fitting ...

Diameter: 16 mm - 400 mm
Operating pressure: 0 bar - 16 bar

... Series of fittings designed for conveying fluids under pressure with a metric solvent weld jointing system Standards: EN ISO 1452, EN ISO 15493, EN 727, DIN 8063 ...

Diameter: 27 mm

... Single handed operation Closed sleeve protects the coupling from dirt Meeting standards US-Mil.-Spec. C4109 & ISO 6150 Working Temperature (Depending on Medium): -20°C to +100°C (NBR) Working Pressure: NULL ...

Diameter: 25 mm - 150 mm

... Sanitary Stainless Steel Tee Three Way Connection: Welded, Clamped, Flanged, Threaded Standard: DIN, SMS, ISO Material: SS304 SS316L Size: DN25-150, 1"-6" Application: Dairy, Food, Beer, Beverage, Pharmaceutical and other industrial ...

Diameter: 2 in - 4 in
Operating pressure: 0 bar - 25 bar

... NBR (Nitrile), EPDM and FFKM (Chemraz®)other seals available on request. End Conections Threaded – BSP, NPT, ISO Flange – ANSI, ASME, ISO, DIN Working Pressure Upto 25 bar ...

... biochemical industry. Connlock® is available in the dimensions DN 6 up to DN 65 with welding ends, Tri-Clamp ends or other fittings. They are also available in sizes ranging from 1/4" up to 3". The tubing connectors are made entirely ...