DN: 0.25, 0.5 in
Pressure: 40 bar
Temperature: -40 °C - 100 °C
... powered mass flow meters red-y compact series. Tightly Closing Valves The valves are tight-closing Different Device Setups The valves are available as straight valves or valve ...
DN: 40 mm - 1,600 mm
Pressure: 2.5 bar - 100 bar
Temperature: -10 °C - 200 °C
... the request of customers . The gate valve body is made of cast steel and it is suitably dimensioned to assure a high safety factor. The thicknesses are always higher than the mini-mum ones established for GATE VALVE ...
DI NICOLA INFINAM
DN: 0.25 in
Pressure: 3 bar - 200 bar
Temperature: 10 °C - 50 °C
... The Pressure regulating valve is suitable for reducing the material pressure to the required working pressure and for leveling out pressure fluctuations in the material supply of greases, oils and pastes. This ensures an absolutely uniform ...
Dosier- und Prüftechnik GmbH
DN: 0.375, 0.5 in
Pressure: 0 bar - 6 bar
Temperature: 0 °C - 100 °C
... PVA float valve series PEKI-VA made of stainless steel in 3/8 and 1/2″ Our PEKI mechanical brass valve series has been manufactured for decades from high-quality hot-pressed parts and precision turned parts, which are ...
PVA Schwimmerventile GmbH
DN: 2 in - 24 in
Pressure: 16 bar - 250 bar
... entry ball valves are used in piping systems where the top of the valve can be removed to gain access to the ball and seats without removing the entire valve from the piping system. Typically made from ...
Athena Engineering S.r.l.
DN: 1 in - 10 in
Pressure: 0 bar - 420 bar
Temperature: -120 °C - 650 °C
... one device including one upstream valve, one quick action line blind and one downstream valve. The mechanical safety interlock between the Line Blind and the valves prevents any operation of the Line ...
DN: 0.5 in - 12 in
Pressure: 10 MPa - 76 MPa
Temperature: -29 °C - 425 °C
... B16.34 Valve body material: WB36/A105/F22 Flow characteristics: L Leakage level: MSS-SP61 Product Features 1. - Multi-stage pressure réduction structure principle effectively avoids cavitation and prolongs service life. 2. - ...
DN: 15 mm - 100 mm
Pressure: 16 bar
Temperature: -20 °C - 180 °C
... Flapcon® BA102 Series Monoblock flanged ball valves are manufactured from cast iron, cast steel and stainless steel castings. Thanks to full-bore ball construction, they provide high capacity permeability. Due to the wafer type connection ...
FLAPCON VALVES AND AUTOMATION SYSTEMS CO LTD
... shutoff. • - Easy operation with a quarter-turn valve handle. • - High-quality ball and seat design for improved sealing and flow control. • - Suitable for a wide range of media, including gases, liquids, and slurry. Specifications: • ...
DN: 0.375 in - 2 in
Pressure: 10 bar
Temperature: -20 °C - 150 °C
... the flow of the liquid. Return Spring: Often, there is also a return spring that pushes the armature or piston into a closed position when the coil is not energized. Orifice or Valve: The orifice or valve ...
DN: 6, 4 mm
Pressure: 1 bar - 10 bar
Temperature: -10 °C - 150 °C
... stickings and detachment liquids. Function: Nebulizer for fluids with Venturi effect with adjustable spout by means of a knurled ring nut Activation Pneumatic: the aspiration of the liquid happens at flowing of the ...
DN: 0.5 in - 2 in
Pressure: 16, 40 bar
Temperature: 0 °C - 187 °C
... MAROS engineering - Applications Modulating control valve for steam and various fluids at high-temperature. Check our Compatibility Chart or contact us to verify fluid compatibility with valve materials. ...
MAROS Engineering
... transferring to a keg, or ball lock disconnects for gas and for liquids. With the spunding valve, it is possible to get natural carbonation in the fermentation tank, by fermentation. Adjust the relief valve ...
DN: 200 mm
Pressure: 100, 80 bar
Flow rate: 175 m³/h
... on the type of valve. High pressure recovery valves (butterfly valves, ball valves) have a low FL value and are not suitable for operation under throttled flow and cavitation conditions. For ...
DN: 150, 200, 250 mm
Pressure: 0 bar - 16 bar
Temperature: -20 °C - 100 °C
... AQUApipe stainless steel pipes 304/1.4301 diameters 18mm to 108mm are compatible with other fittings 18mm to 108mm in material 304/1.4301, 316/1.4401 or 316L/1.4404. AQUApipe press fittings 304/1.4301 diameters 18mm to 108mm are compatible with DVGW ...
DN: 15 mm - 100 mm
Pressure: 16 bar
Temperature: 0 °C - 60 °C
... EFFAST PVC-U valve BK1 is a true union ball valve ideal for heavy duty applications, chemical applications and water treatment. Technical features: Solvent welded sockets (ISO, BS, ASTM, JIS), threaded ...
Effast
DN: 50 mm - 300 mm
Pressure: 4 bar
Temperature: -20 °C - 50 °C
... regarding valve tightness after high number of cycles, and EX knife gate valve successfully passed this specific type test which includes several air and water tightness tests. Moreover, in the specific ...
DN: 15 mm - 1,200 mm
... their ability to cut through liquids, gate valves are often used in the petroleum industry. For extremely thick fluids, a specialty valve often known as a knife valve is used to cut through ...
DN: 12.7, 6, 0.375 mm
Pressure: 0 MPa - 0.8 MPa
Temperature: -10 °C - 145 °C
... Sanitary Stainless Steel Sterile Sampling Valve Connection: clamped, threaded, welded, flanged Material: SS304, SS316L Size: DN6-15 Application: Dairy, Beer, Food, Beverage, Pharmaceutical, Biological Engineering and other industrial ...
Wenzhou Lihong Machinery TECHNOLOGY Co., LTD
DN: 15 mm - 50 mm
Pressure: 40 bar
Temperature: 200 °C
... KVF-Type is part of the KÜHME High-Performance Class. KVF- Valves are especially designed for immediate and premium tight shut-off of any type of liquid fuel flow. This electro pneumatic globe valve is ...
Kühme Armaturen GmbH
DN: 10 mm - 150 mm
Pressure: 10 bar - 63 bar
Temperature: -196 °C - 200 °C
... for actuator, flange according to ISO 5211 – seal elements change possible – in the case of manual lever control the ball valve can be retrofitted by locking the open-closed positions with a padlock or positioner, witch reports the ...
Pressure: 5,000 psi - 15,000 psi
Temperature: -29 °C - 121 °C
... Plug valve is a necessary part in cementing and fracturing operation in oil and mining fields as well as similar high pressure liquid control. It features compact structure,easy maintenance, low torque, quick opening ...
DN: 15 mm - 100 mm
Pressure: 10 bar
Temperature: -29 °C - 180 °C
... PFA LINED, FULL BORE, DIN BALL VALVE – KTN 123T The KTN 123T is our PFA lined DIN flanged full port ball valve. The range is from DN15 to DN150. Suitable for handling large quantities of highly corrosive media thanks ...
DN: 50 mm - 400 mm
Pressure: 10, 7, 8, 5, 6 bar
... mounted between two flanges according to EN 1092-1 type 11 form B – PN10 (former DIN 2501). ANSI 150 on request. Media Liquid and pulverised media with fibre particles, viscous media, drain water, sludge, food etc. (plastic granulates, ...
Watergates GmbH & Co. KG
DN: 250 mm - 1,000 mm
... Use : For general applications, fluids, gas and water treatment. Body shape : Double flanged Type : 2314 Tightness: Elastomer (EPDM/NBR/VITON/HYPALON/NEOPRENE/SILICONE) Face to Face : EN 558-1/20 Max working pressure : ...
the best suppliers