Process valves

DN: 20 mm - 200 mm

... style control valves, the GS-General Service Valves combines advanced levels of body configuration, trims and actuation to produce a valve assembly capable of premium performance at a ...

DN: 150 mm - 400 mm

... traditional valves. The valves are equipped with live-loaded seals which ensure extended durability and wear resistance, providing excellent sealing across the entire valve surface. Additional ...

... to abrasion as compared to traditional valves. Moreover, it avoids the use of flange gaskets. VL Slide Valves are available in a variety of configurations including rectangular sizes. In the VLQ version ...

DN: 15 mm - 250 mm
Pressure: 10 bar - 100 bar
Temperature: -60 °C - 350 °C

The sliding gate control valve type 8021 in reinforced GS3 design with integrated positioner is suitable for a wide range of process applications. Media such as steam, liquids, gases, etc. can perfectly ...

DN: 15 mm - 150 mm
Pressure: 0 bar - 40 bar
Temperature: -60 °C - 350 °C

... control valve type 8020 with NAMUR interface for universal positioner assembly is suitable for a wide range of process applications. Media such as steam, liquids, gases, etc. are easy to handle. For high ...

DN: 25 mm - 250 mm
Pressure: 0 bar - 160 bar
Temperature: -60 °C - 530 °C

Sliding gate control valve for high-pressure applications Product line GS4 The high-pressure sliding gate control valve type 8021 with integrated positioner is suitable for a wide range of process ...

DN: 0.25 in
Pressure: 0 bar - 10 bar
Temperature: 0 °C - 70 °C

Compact needle valve in aluminium housing Leak-free valve Spring loaded, non rising adjustment stem with 56-pitch thread provides smooth, non-reversing flow characteristics and 15-turn resolution Non-rotating ...

Pressure: 75, 500, 420 bar
Temperature: -40 °C - 80 °C
Flow rate: 30 l/min

... check valve. If the pressure on the consumer side drops below the pressure setting, the idle circulation is interrupted and the oil fed to the consumer again. Shut-off valves or accumulator charging ...

DN: 8 mm - 25 mm
Pressure: 10,000 psi - 20,000 psi

Needle Valves, SM Series - 20,000 PSI | #20SM4071 Parker Autoclave's SM Series needle valves are a non-rotating rising stem design, with working pressures to 20,000 psi (1379 bar). Tubing sizes range ...

DN: 8 mm - 80 mm
Pressure: 40, 63 bar
Temperature: -20 °C - 80 °C

Actuated valves in the RV-FLUID series consist of a pneumatic rotary actuator series R4 that controls a ball or a butterfly valve. Ball valves come in the 2- and the 3-way version, with ...

DN: 8 mm - 100 mm
Pressure: 0 bar - 63 bar
Temperature: -20 °C - 200 °C

2-way, 2-way manual or 3-way: the stainless steel ball valve VZBE controls various media, in both process automation and industrial automation. • 2-way manual, with lockable hand lever • 2- and 3-way ...

DN: 15 mm - 63 mm
Pressure: 40, 25 bar
Temperature: -20 °C - 150 °C

The ball valve series VAPB offers high-quality ball valve solutions with full through-flow, for industrial applications. In brass (MS) or stainless steel (CR) for enhanced corrosion resistance. • Automatable ...

DN: 8 mm - 100 mm
Pressure: 63 bar
Temperature: -10 °C - 200 °C

... -free control of aggressive media or gases in piping systems: the automatable 3-way ball valve VZBA in stainless steel. • Automatable 2-way or 3-way ball valve • Stainless steel design • Blow-out ...

DN: 40 mm - 100 mm
Pressure: 5 bar - 10 bar
Temperature: 140 °C

DT4 - Tank Outlet Double Seat Mix Proof Valves Product Type: VALVES / MIX PROOF VALVES The DT4 tank outlet mix proof valve is used for the reliable separation between ...

DN: 50 mm
Pressure: 0 bar - 10 bar
Temperature: 140, 135 °C

The CPV constant pressure diaphragm valve forms part of the pneumatically operated pressure regulating and pressure holding valves which keep process pressures constant in process ...

DN: 25 mm - 100 mm
Pressure: 10, 6 bar
Temperature: 140, 135 °C

... PR2 sampling valve. Advantages Prevention of infection thanks to a PTFE shaft and a special shaft guide. No additional seat seal required. Cleaning is assured. No dead pockets in the valve ...

DN: 20, 25, 15 mm
Pressure: 16 bar
Temperature: -10 °C - 110 °C

2 way MM BRASS Diamant ball valve 2-way MM BRASS with caps and tangs

DN: 32, 40, 50 mm
Pressure: 40 bar
Temperature: -20 °C - 110 °C

PRO Range motorised valve – 2 way FF BRASS Description INDUSTRIAL USE ALL-IN-ONE actuator for 3 points without relay or 2 points with relay connection Operating time: 35 - 45 - 55 sec for 90° rotation Protected ...

DN: 40, 50, 32 mm
Pressure: 10 bar
Temperature: -15 °C - 50 °C

... Class protection IP67 Semiconductor temperature sensor 3-way FFF BRASS ball valve, full bore Diamix and Compamix thermoregulating/mixing motorized valves operate thanks to a built-in electronics ...

DN: 8 mm - 25 mm
Pressure: 0 bar - 7 bar
Temperature: -10 °C - 140 °C

The GEMÜ F40 2/2-way filling valve is designed for filling processes in aseptic and hygienic areas of application. Flow rates up to 6,600 l/h are possible depending on the version. The sealing concept of the valve ...

DN: 10 mm - 80 mm
Pressure: 0 bar - 25 bar
Temperature: -10 °C - 60 °C

... angle seat globe valve has a hollow shaft actuator and is electrically operated. The eSyDrive hollow shaft actuator can be operated as an OPEN/CLOSE actuator or as an actuator with integrated positioner or process ...

DN: 12 mm - 65 mm
Pressure: 0 bar - 10 bar
Temperature: -10 °C - 80 °C

... Diaphragm valve is actuated by a motorized hollow shaft actuator. It is based on technology that does not use brushes or sensors and therefore guarantees high performance and a long service life. In addition to OPEN/CLOSE ...

DN: 25 mm - 200 mm
Pressure: 0 bar - 16 bar
Temperature: -20 °C - 60 °C

... pneumatic rotary actuator. Gas ball valves are mainly used to shut off the gas flow in gas trains or gas installations before and after other equipment like gas pressure regulators, gas meters etc. These ball valves ...

The AGVB / AGVM control valves are basic and the most versatile type of control valves. Description The CV 3000 Alphaplus range of Top-guided Single-Seated Control Valves features a ...

DN: 6 mm - 200 mm
Pressure: 0 bar - 16 bar
Temperature: -20 °C - 160 °C

... in contact with the fluid handled only: body and diaphragm ● Body designs: 2-way valve body, T-pattern, tank or multi-port valves ● Butt weld ends or clamped connection ● Drain angle indicated by ...

DN: 15 mm - 200 mm
Pressure: 0 bar - 16 bar
Temperature: -20 °C - 160 °C

Weir-type diaphragm valve to DIN/EN with flanged ends, threaded socket ends or socket weld ends, in straight-way pattern; shut-off and sealing to atmosphere by supported and confined diaphragm; body with coating or lining, ...

DN: 1.5 in - 6 in
Pressure: 5 bar
Temperature: 135, 140 °C

The next generation of mixproof valve technology is the result of continued development from both APV and Waukesha Cherry-Burrell process technologies. Used for the reliable separation of dissimilar fluids, ...

DN: 25 mm - 152 mm
Pressure: 5 bar - 84 bar
Temperature: 21 °C - 138 °C

W60 series single seat valves are used to shut-off or divert flow in a process system. These valves are pneumatically or manually operated, and offered in a wide variety of configurations. ...

... conditions caused by traditional flow diversion valves, extending the life of the valve and surrounding process equipment. The W265 HTST valve assembly comes complete ...