DN: 25 mm - 400 mm
Pressure: 0 bar - 10 bar
Temperature: 220 °C
... Energy saving valve for the precise and economical control at low loss of pressure of liquids and gases that can be either clean or contain particles. Applications - Air for aeration in wastewater treatment plant - Gases - Municipal ...
DN: 25 mm - 400 mm
Pressure: 0 bar - 10 bar
Temperature: 180 °C
... Energy saving valve for the precise and economical control at low loss of pressure of liquids and gases that can be either clean or contain particles. For : Air for aeration in wastewater treatment plant Gases Municipal and industrial ...
DN: 50 mm - 600 mm
Pressure: 1 bar - 10 bar
... The type C Knife Gate Valve for bulk material is a unidirectional wafer valve which was designed especially for bulk material technology (powder or granulated materials). The Knife Gate Valve AKO type ...
DN: 0 mm - 10,000 mm
Pressure: -10 bar - 7,000 bar
Temperature: -20 °C - 200 °C
... ball valve designed for reliable on/off isolation in industrial piping systems.
MARSVALVENOK
DN: 6.35 mm - 101.6 mm
Pressure: 0 bar - 137.9 bar
... Product
2-piece ball
valve Series F202D designed for industrial fluid isolation. Size range 1/4" – 4"; Pressure rating 2000 PSI max.; Seats: TFM1600.
Specifications
- Model: Series F202D
- Size range:
MARSVALVENOK
DN: 3.175 mm - 50.8 mm
Pressure: 0 bar - 137.9 bar
Temperature: -20 °C - 180 °C
... Product overview
A complete range of non-maintainable 1-piece reduced-bore ball
valves in CF8M stainless steel. Economical, compact and reliable with blow-out proof stems, insulated grips and lockable lever handles. Investment ...
MARSVALVENOK
DN: 0.5 in - 6 in
Pressure: 0 bar - 60 bar
... Hyperr Valves Pvt Ltd is a leading manufacturers, supplier and exporter of Pressure Reducing Valves. Our Pressure Reducing Valve is engineered to automatically reduce a high, fluctuating inlet pressure ...
DN: 0.5 in - 6 in
Pressure: 0 bar - 100 bar
... Hyperr Valves Pvt Ltd is a leading manufacturers, supplier and exporter of Pressure Reducing Valves. Our Pressure Reducing Valve is engineered to automatically reduce a high, fluctuating inlet pressure ...
DN: 0.5 in - 6 in
Pressure: 0 bar - 4 bar
... A Back Pressure Regulating Valve (BPRV) is designed to maintain a constant upstream pressure by automatically opening when inlet pressure rises above the set point and closing as pressure decreases. It provides smooth, ...
DN: 6, 8 mm
... >APV | Electronic Pinch
Valve | Solenoid | Soft silicone tubing | 6 mm / 8 mm | NC / NO
CPV | Cylinder Pinch
Valve | Pneumatic | Hard tubing / silicone-braided | 1.5" | Double / Single acting
PPV | Proportional ...
DN: 15 mm - 65 mm
Pressure: 0 bar - 10.2 bar
Temperature: 0 °C - 180 °C
... position feedback signal 0-10 V / 4-20 mA (after automatic balance) Control element 2-port/2-way valve, NC (normally closed) as standard, as option 3-port/2-way valve for mixing different media, with standard piston Electrical ...
DN: 3 in
Pressure: 230 mbar - 8,000 mbar
Temperature: 60 °C
... Vaive opens and closes automatically. - - No residual liquid in pipe at the end of loading process. - - The operator cannot leave the pump during the refuellinq process. * Flow and Turbolence should modify initial and ...
DN: 32 mm - 1,400 mm
Pressure: 0 bar - 10 bar
Temperature: -20 °C - 180 °C
... knife gate valves experts, Flowrates will provide the finest solutions to your process. Our extensive range of knife gate valves enables our customers to solve problems on site trough our solutions. They ...
DN: 15 mm - 100 mm
Pressure: 10 bar
Temperature: 0 °C - 80 °C
... • Competitive ball valve to work in the water treatment sector • PTFE seats and joints in EPDM or FKM • Completely removable • Pressure -PN10 • Step ball T or step L • Available in PVC-U, PVC-C, PP thermoplastic materials • Connector ...
DIVATEC,SL
DN: 15 mm - 100 mm
Pressure: 16 bar
Temperature: -20 °C - 100 °C
... • BV ball valves for chemical fluids • PVC-U, PVC-C (HT), PP or PVDF thermoplastic materials • EPDM, FKM gaskets, on request we have a FKM FB with glass fiber loading for very corrosive fluid applications • PTFE ball seats • Bushing ...
DIVATEC,SL
DN: 20 mm - 75 mm
Pressure: 10 bar
Temperature: 0 °C - 100 °C
... To cut pipe systems Fluids Neutral media free of solids and aggressive liquid or gaseous media if the valve components that contact the media are resistant to the service temperature according to the Divatec resistance ...
DIVATEC,SL
DN: 25 mm - 200 mm
Pressure: 0 bar - 16 bar
Temperature: -20 °C - 60 °C
... pneumatic rotary actuator. Gas ball valves are mainly used to shut off the gas flow in gas trains or gas installations before and after other equipment like gas pressure regulators, gas meters etc. These ball valves ...
DN: 10 mm - 50 mm
Pressure: 0 bar - 10 bar
Temperature: -20 °C - 150 °C
... granted Lifetime 10 times longer than a ball valve with with reduced maintenance costs 100% in- house manufacturing process technology Maximum control and accuracy in all the stages of the manufacturing process Less ...
OMAL Spa
DN: 3 mm - 12 mm
Pressure: 0 bar - 10 bar
Temperature: 0 °C - 70 °C
... Compact needle valve in aluminium housing Leak-free valve Spring loaded, non rising adjustment stem with 56-pitch thread provides smooth, non-reversing flow characteristics and 15-turn resolution Non-rotating stainless ...
DN: 0.5 in - 8 in
Temperature: -60 °C - 538 °C
... Habonim’s metal seated ball valves series is tough – designed to stand up to the most difficult process conditions including a combination of extreme temperatures, high pressure, and abrasive media. Its superior engineered ...
DN: 15 mm - 100 mm
Pressure: 10 bar - 40 bar
Temperature: -50 °C - 210 °C
... Two-piece ball valve for installation between flanges according to DIN EN 1092, pressure class depending on the nominal size up to PN 40, floating ball, vacuum-tigh. Face-to-face dimension EN 558 line 27 (DIN 3202-F4), EN 558 line ...
GEFA Processtechnik
DN: 0.375 mm
Pressure: 0.2 bar - 20 bar
Temperature: -60 °C - 225 °C
... vapours and - depending on the sealing material - also for steam - pressure control valve in test rig construction - bypass valve as pump protection - process equipment construction - ...
Goetze KG
DN: 0.375 in
Pressure: 6,000 psi
Temperature: 200 °C
... cobalt plated valves in terms of resistance to corrosion WEEE and RoHS compliant Canalta valves that incorporate this patented design include our 100 Series hard seat mini valves, 800/850 Series bleed ...
DN: 0.25 in
Pressure: 0 bar - 200 bar
Temperature: -20 °C - 70 °C
... The rossignol metering valve will be fitted di- rectly to the cylinder valve. Due to the slim conus of the metering spindle the rossignol valve guarantees precise metering. As an option the valve ...
Hornung GmbH
Pressure: 5,000, 3,000 psi
Temperature: 0 °F - 225 °F
... bleed pressure from a line after a calibration is complete • Easily connect between the end of a Quick-test hose and the process connection • Keep fluid or contaminates out of the hand pump, calibrator or nitrogen control device ...
Ralston
DN: 25 mm - 150 mm
... generation New, shorter lanterns Shortened vertical socket on the valve configurations "L" and "T" Advantages of the ECOVENT® valves: Use of the established and proven VARIVENT® valve housing VARIVENT® ...
... design isolates working parts and top-works from fouling or corrosive service, and nullifies the effects of back pressure on valve performance. The “D” to “T” orifices meet API Standard 526 covering orifice areas and center-toface dimensions. ...
DN: 10 mm - 150 mm
Pressure: 10 bar
Temperature: -10 °C - 25 °C
... design Maximum reliability Versatility of product configuration The VVF is a manual butterfly valve which cuts off and monitors fluids in the process flow by movements of opening and closing. Characterized by a simple ...
BARDIANI VALVOLE S.p.a.
DN: 0.5 in - 2 in
Pressure: 138 bar
Temperature: 0 °F - 400 °F
... resistance properties and are recommended for process piping. The three-piece valve is recommended for petrochemical, utility service applications. It meets Fire Safe and Anti-Static requirements. The NIBCO® ball valve ...
NIBCO
DN: 0.375, 0.5 in
Flow rate: 5.6 l/min - 28 l/min
... Standard digital RS-485 interface implemented using galvanically isolated RS-485 transceiver with high common-mode transient immunity allows direct digital communication with PLC or PC and provides access to all configuration ...
DN: 0.5 in - 4 in
Pressure: 10 bar
Temperature: 150 °C
... VPA sampling valves are designed to take samples aseptically, thanks to their configuration they can be sterilized with pure steam by SIP process or washed by CIP process, to create a protective barrier ...
AERRE INOX Srl
DN: 40 mm
Pressure: 0 bar - 0.6 bar
Temperature: 5 °C - 90 °C
... 2/2-way direct acting drain valve of nominal diameter DN 40 for controlling low aggressive liquid media, such as cleaning or disinfection agents. Valves of this type are medium separated having a single chamber valve ...
A. u. K. Müller
DN: 25 mm - 700 mm
Pressure: 10 bar - 100 bar
... control The valve segment comes with dual bearings which results in high durability and low torque requirement The valve seat can be replaced from the outside without the need to disassemble the valve, ...
SOMAS
DN: 50 mm - 600 mm
Pressure: 10 bar
Temperature: 230 °C
... These versatile, high-performance valves are suitable for most industry process applications. From process water or pulp and paper to mining (light to medium slurries), Food & Beverage, acid and alkaline ...
DN: 0.125, 0.25, 0.18 in
Pressure: 10, 160, 300 bar
Temperature: -20 °C - 80 °C
... The PVB Divider Valve is designed for small-size series progressive lubrication systems. It is a cost efficient solution for supplying multiple lubrication points with relatively small volumes of oil and grease. For use with machine ...
Pressure: 10 bar
Temperature: 150 °C
... request. Internal Assembly The internal assembly includes two valve seat seals by default. Valve seat A can be executed either with a shrunk or screwed valve seat seal, whereas valve ...
GEA Procomac S.p.A.
DN: 1 in - 6 in
Temperature: -60 °C - 200 °C
... wide range of process applications •Maximum reliability: one piece ball/stem unit avoids weak spot ball to stem •Universally applicable: many options in combination with a thick-walled PFA lining •Efficient alternative to plug valves Specifications ...
DN: 25 mm - 150 mm
Pressure: 0 bar - 22.7 bar
... particularly suit the process conditions - Valve disk with balancer: Reduces pressure surges when closing in the direction of flow The cone-shaped valve disk ensures a gentle transfer of ...
DN: 1 mm - 8 mm
Temperature: -10 °C - 200 °C
... control valve VALVE STYLE Ball valve USAGE Low-pressure service On/off service VERSION ANSI SUPPLY Pneumatic VALVE SIZE PRESSURE RATING Class 150 LINING PTFE Special ...
Pfeiffer Chemie-Armaturenbau GmbH
Pressure: 0 psi - 125 psi
Temperature: -20 °F - 180 °F
... TAC Manual Valves are miniature pneumatic 2, 3 and 4-way Push Button and Toggle valves available in 10-32 UNF, 1/8 and 1/4 PIPE sizes. Compact and rugged, TAC valves provide excellent flow, and are designed ...
Humphrey Products
DN: 40 mm - 1,600 mm
Pressure: 2.5 bar - 100 bar
Temperature: -10 °C - 200 °C
... the request of customers . The gate valve body is made of cast steel and it is suitably dimensioned to assure a high safety factor. The thicknesses are always higher than the mini-mum ones established for GATE VALVE ...
DI NICOLA INFINAM
DN: 0.25 in
Pressure: 3 bar - 200 bar
Temperature: 10 °C - 50 °C
... The Pressure regulating valve is suitable for reducing the material pressure to the required working pressure and for leveling out pressure fluctuations in the material supply of greases, oils and pastes. This ensures an absolutely uniform ...
Dosier- und Prüftechnik GmbH
DN: 2 in - 24 in
Pressure: 16 bar - 250 bar
... entry ball valves are used in piping systems where the top of the valve can be removed to gain access to the ball and seats without removing the entire valve from the piping system. Typically made from ...
Athena Engineering S.r.l.
DN: 1 in - 10 in
Pressure: 0 bar - 420 bar
Temperature: -120 °C - 650 °C
... one device including one upstream valve, one quick action line blind and one downstream valve. The mechanical safety interlock between the Line Blind and the valves prevents any operation of the Line ...
... : Used in sanitary processes when you need a valve for isolation or control of the flow of a product. The 3-piece design allows for seat and/or ball replacement without removing the valve from the process ...
DN: 50 mm - 300 mm
Pressure: 10, 16 bar
... INFINITY PE ends Gate valves with PE ends for assembly on PE pipes with electrofusion couplings or by butt fusion welding process. Gives continuity to the installation. To be operated by means of Handwheel or T-Key. ...
DN: 40, 300 mm
Pressure: 10 bar
Temperature: -10 °C - 150 °C
... Cast iron (GJL 250) PN 10 gate valve flat body inside screw stainless steel (AISI 304) trim 150°C (max) Main characteristics • Manufactured in Italy in accordance with EN 1171 • Face-to-face length according to EN 558-1, basic series ...
MARAN E PERACINI
the best suppliers