Machine tool greases

Operating temperature: -30 °C - 120 °C
Viscosity: 0.0001, 0.000011 m²/s

... basis of service conditions. If old grease cannot be removed, restrict the quantity of grease so as to avoid overlubricating the bearing. If lubrication frequencies tend to be low, you should aim for ...

Operating temperature: -30 °C - 120 °C
Viscosity: 0.00011, 0.000009 m²/s
Flash point: 3 °C

... completely. The bearing and machine manufacturer's instructions should be observed. Subsequent lubrication at the lubrication nipples by grease gun. Assess the lubrication frequency and quantity on basis ...

Operating temperature: -25 °C - 80 °C
Viscosity: 0.0001, 0.000009 m²/s
Flash point: 100 °C

OKS 403 is a marine grease for lubrication of machine elements subjected to water or sea water. Areas of application Lubrication of open toothing, friction and rolling bearings, threaded spindles, ...

Operating temperature: -30 °C - 150 °C
Viscosity: 0.0002, 0.00026 m²/s
Pour point: 200 °C

... under heavy loads and a broad temperature range, as well as all sliding speeds permissible for grease lubrication Advantages and benefits Modern grease with a wide range of applications Supports ...

Operating temperature: -20 °C - 130 °C
Viscosity: 0.000185, 0.000014 m²/s
Pour point: 200 °C

... Relubrication with a grease gun on to the grease nipples or with an automatic lubrication system. Relubrication intervals and amount to be defined acc. to the service conditions.f the removal of the old ...

Operating temperature: -50 °C - 120 °C
Viscosity: 0.000015, 0.000004 m²/s

... bearing or machine manufacturer. Relubrication with a grease gun on to the grease nipples or with an automatic lubrication system. Relubrication intervals and amount to be defined acc. ...

Operating temperature: -25 °C - 150 °C
Viscosity: 0.00022 m²/s

OKS 418 is an economic hot bearing grease for lubrication of friction and rolling bearings at higher temperatures. Areas of application Grease lubrication of plain and rolling bearings at high temperatures, ...

Operating temperature: -10 °C - 160 °C
Viscosity: 0.00049, 0.000032 m²/s

... Relubrication with a grease gun on to the grease nipples or with an automatic lubrication system. Relubrication intervals and amount to be defined acc. to the service conditions. If the removal of the ...

Operating temperature: -40 °C - 140 °C
Viscosity: 0.00005, 0.000008 m²/s
Pour point: 268 °C

Fully synthetic high-performance grease for long-term lubrication of machine elements at high temperatures, speeds and loads. Advantages and benefits Allows high machine service lives ...

Operating temperature: -40 °C - 200 °C
Viscosity: 0.0004, 0.00004 m²/s

... 50,000) and their housings should be filled completely. The bearing and machine manufacturer's instructions should be observed. Subsequent lubrication at the lubrication nipples by grease gun or by automatic ...

Operating temperature: -40 °C - 120 °C

Lithium synth. base oil For high-speed bearings, n x dm = 1,4 Mio, machine tools and textile spindles, electrical motor, linear guiding.

Operating temperature: -33 °C - 155 °C

Chucks for machine tools and as mounting aide for gears and electrical motors, etc., ejectors of plastic injection moulding machines (up to +100 °C), prevent corrosion and fretting corrosion.