Manual pumps

Flow: 0.5 l/min - 12 l/min
Pressure: 20 bar
Power: 1.8 kW

... The m-tec speedy-MP is an easy-to-handle pump for processing soft materials or pumpable products such as structured or decorative renders with a granularity of up to 2 mm. It is mainly used to pump creative decorative ...

Power: 120 W
Length: 535 mm
Width: 308 mm

... sterility test, and the bottom is exposed from isolator and be electricity parts. Main parts: Pump device, pump head, screen, bottle holder, drain tray, speed control and footswitch. Technical feature 1. SS304 ...

Flow: 5.8 l/min
Pressure: 0 bar - 250 bar
Fluid temperature: -20 °C - 90 °C

... Performaces and calibrations are carried out by using hydraulic oil with 30 cSt viscosity at 50°C Recommended viscosity 10 ÷ 420 cSt Absolute filitration 25 μm ...

Flow: 0 l/min - 1.5 l/min
Fluid temperature: -60 °C - 120 °C
Length: 210 mm

... tubing size based on the following chart. Support manual mode Support fully automatic cycle Semi-automatic cycle Manual start/stop Speed control Basic Parameters Current: 2A max Pump tube: ...

... pumped to another source for collection and/or disposal. The Mist Pump features: 10 gallon storage tank 115 volt self priming pump adjustable float switch that activates the pump for the transfer ...

Flow: 0 m³/s - 26 m³/s
Head: 0 mm - 17 mm
Power: 0.75 kW - 1.1 kW

... Multi-channel open impeller and double chopping system. Chopping system. Flow rate: 26 m³/h Head 17 m Motor power rating: 0.75– 1.1 kW Discharge outlet: 40 mm ...

Pressure: 100 bar
Fluid temperature: -10 °C - 60 °C
Width: 158 mm

... cement mills, and other facilities with similar equipment and work conditions. The pump consists of the following units: lubricant tank, pump body with pumping system elements, distribution slider ...

Pressure: 2,500 psi - 5,000 psi

... Adjustable lever adapts pump to lubricant type and operating conditions Includes 2 check valves – one at the bottom located on rod, and a second valve mid-way in the tube for increased volume Recommended accessories: ...

... Numak srl®, is a hand-operated container pump that is utilized for manual liquid conveying and is characterized with a development that is guided for developing and operating which makes it reliable. The pump ...

Pressure: 0 bar - 35 bar

... The manual pumps prd - 13 are supplied for centralized lubrication system with oil where volumetric metering units are used. The pumps assembly are located on the bottom of the reservoir and the vertical ...

Fluid temperature: -20 °C - 40 °C
Length: 110 mm
Width: 100 mm

... Hand-operated piston pump for distribution out of drums and small containers. Description For diesel, heating oil EL/L and radiator antifreeze (concentrate) Piston pump Single-action Rigid suction ...

Flow: 1 l/min
Input diameter: 4 mm
Weight: 2 kg

... water resistant. The pump can deliver a pump pressure of 3 bar, which makes it suitable for use with in-line filters, and an underpressure maximum of 1 bar. It is a self-priming pump. Even when the ...

Pressure: 700 bar

... • Easy to carry – Made of aluminum. • Ergonomic – Easy grip pump lever and relief knob. • High Speed – The pumps have 2-step function that automatically switches between high speed and high pressure. • Safe to use ...

Flow: 1 m³/h - 100 m³/h
Pressure: 0 bar - 260 bar

... CM surface transfert pumps can be highly customised to obtain any configuration adapted to a specific installation, meeting project specific challenges and operators’ own unique asset standards. PCM provides EPC customers with a unique ...

... cps. The pumps are ruggedly constructed with polypropylene and polyethylene to perform in hostile conditions. Each EZI-action Drum Pump is supplied with the appropriate adapters for quick and easy installation. EZI-action ...

Pressure: 1.7 bar - 3 bar
Length: 85, 132 mm
Width: 72, 99 mm

... Volumetric manual pump; each activation tallies with the pre-set quantity of lubricant. The lubricant is delivered by a plunger piston driven by a mechanical spring, suitably sized and preloaded. Tank capacity: 0,6 ...

Flow: 6 l/h - 200 l/h

... drug applications. The Genizer Sanitary High Pressure Pump can work with liposome extrusion for preparation of liposomes and lipopolyplex for drug and gene delivery. Description: Sanitary pump up to 2,000 bar with ...

... Hand pump specially designed for bolt tensioner applications. This pump is compact and light in weight with a longer handle needing very little effort to generate max working load. All pumps ...

... This Zinc model of the classic C7 is designed for use in underground mines. The C7-01 hand operated oil pump is suitable for use with a wide range of mineral oils. It is ideal for pumping gear oils and transmission fluids ...

... Self-contained and sealed oil bucket pumps with a 20-liter capacity. These pumps are completely sealed to the oil container preventing any contamination or spillage. ...

Pressure: 700 bar

... check valves. OPERATIONAL AREAS These steel hand pumps are cheap and handy, and have a high flow and a big reservoir capacity if compared to electric or pneumatic power packs or to PN hand pumps. ...

... operation option available so pump can be used as a back up to main pump or in low volume lab applications. AIR FLOW dictates how fast the pump can cycle and hence flow rate depends on how much air ...

Flow: 3, 1.5, 5 l/h
Pressure: 8, 7, 5 bar
Power: 16 W

... PTFE diaphragm Safe: leak free operation, no external moving parts Robust, compact reliable design Pump-head with manual priming system Standard level probe compability Manual adjustment, ...

Pressure: 250 bar

... Hydraulic Hand Pump • If only the die ifter is used, the usage of a manual hydraulic pump can alternatively be used. ...

Flow: 8 l/min

... 22080 RINOX 80 Single-action stainless steel pump. Standard equipment for oil and antifrezee: rigid filling pipe, plastic ring nut for drums with PTFE gasket. ...