Metal anti-vibration mounts

Static load: 50 daN - 5,500 daN
Diameter: 80 mm - 200 mm

... OSM is the original machine mount with excellent anti-vibration and levelling performance. Designed for a versatile and professional use within industrial and production applications. ...

Diameter: 8 mm - 150 mm

... rubber as standard but other compounds are available on request. Stainless steel metal parts are also available on request for substantial volume orders. However, if you require a bespoke Bobbin to your ...

Static load: 36 N - 6,400 N
Diameter: 8 mm - 10 mm

All metal components NLC are made in high resistant steel, allowing large deformations in a wide range of charges with reduced internal absorption. Anticorrosion protection of 10 micron for 240 h in salt fog chamber minimum.

Static load: 1.13 daN - 595 daN
Diameter: 6 mm - 200 mm

Economical cylindrical with 5 types of attachment. Universal mounting. Stainless steel and rubber parts on demand.

Static load: 0.5 daN - 2,000 daN

... CAVOFLEX is used to isolate vibrations - whether they are created or received by suspended equipment or as shock absorbing mounts due to its high damping capacity and deflection capacity. The range ...

- Load Kgs. Min-Max 1.000-1.500 - Base size m/m 260 x 145 - Number of springs 6

Static load: 90 N - 6,000 N
Diameter: 20 mm - 120 mm

... standard model of the rust-free rubber-metal buffer, the rubber is nitrile-butadiene rubber (NBR). It is oil-resistant. Its temperature range extends from -30°C to +120°C. The rust-free model of the rubber-metal ...

Diameter: 12.5 mm - 80 mm

Static load: 15 daN - 700 daN
Diameter: 5 mm - 16 mm

with double male cylindrical mounting, 60 Shore A, type A PLACOGRIP® Rubber metal buffer with double male cylindrical mounting STANDARD MATERIAL NR/SBR rubber compound STANDARD HARDNESS 60 Shore A TOLERANCE +/- ...

Diameter: 1.5 mm - 37 mm

... ® cable mounts are produced by WILLBRANDT from stainless steel ropes and aluminium bars. The advantages compared to conventional steel mounts or elastomer dampers lie in their high deformability ...

Diameter: 14 mm - 36 mm

O-shaped mount comprised of a rubber ring between two metal shims with fixing screws. To damp low-frequency vibrations and small loads. Typically used in instrumentation and control applications

... forces of motion occur as noise and vibration in a machine. The formed vibration cause pressure on dynamic structure elements. Although mechanical vibrations are used in some cases, in ...

Diameter: 19.1 mm

FASTENER: Steel, Zinc Plated ISOLATOR: Natural Rubber FOR COMPRESSION LOADS OF: 22 to 28.5 Pounds (10 to 12.9 kgf) FOR SHEAR LOADS OF: 8.4 to 11.9 Pounds (3.8 to 5.4 kgf)

... rigs. The steel spring vibration isolators therefore ensure vibration insulation for all types of machines. MAIN CHARACTERISTIC: standard design steel spring isolator, electro-galvanised or cathodic ...

Static load: 40 kN - 90 kN

Antivabration has very high nergy dissipation. It's suitable to isolate hammer and hot presses.

Static load: 2 daN - 1,800 daN
Diameter: 6 mm - 200 mm

CYLINDRICAL ANTI-VIBRATION MOUNT, MALE - MALE DIN 95363/A MATERIAL - SURFACE TREATMENT Body: NR (Natural rubber) Pin: Cl 4.8 (Steel) white galvanized Washer: DD11 (Steel) white ...

Diameter: 6 mm - 10 mm

To prevent transmission of vibrations (e.g. machine vibrations to anchoring) Min./max. temperature resistance: -40 to 80 °C Type: A Surface: Zinc plated Shore A hardness: 55 ...