Rubber anti-vibration mounts

Static load: 20 kgf - 8,800 kgf

... They enable all types of equipment to be isolated from undesirable vibrations and at the same time can be used for perfect levelling via the integrated valve. When used as a vibration absorber, the internal ...

Static load: 126 kgf

... kg For superior low frequency vibration isolation: PAL-3 至 PAL-9 high-quality air springs are designed for conditions in which the user wants to ensure that equipment is constantly level and isolated from vibrations ...

Diameter: 6 mm - 16 mm

HOME - - 145 - ANTIVIBRANTI, PIEDI REGOLABILI CYLINDRICAL ANTI-VIBRATION - ACPM PRINT Black natural rubber, hardness 60±5 Shore A.

Diameter: 4 mm - 16 mm

HOME - - 145 - ANTIVIBRANTI, PIEDI REGOLABILI CYLINDRICAL ANTI-VIBRATION - ACMF PRINT Black natural rubber, hardness 60 +-5 Shore A.

Diameter: 5 mm - 16 mm

HOME - - 145 - ANTIVIBRANTI, PIEDI REGOLABILI CYLINDRICAL ANTI-VIBRATION - ACFF PRINT Black natural rubber, hardness 60 +-5 Shore A.

Diameter: 30 mm

Sandwich Mount: Base Diameter:30.0 mm | 1.181 in Item code: 551999 80 In stock high Rubber;Zinc Plated Steel Sandwich Mount fits threaded stud absorbs the transmission of vibration ...

Sandwich Mount: N/A, Mounting Method - Rectangular Double Female Item code: 552015 2 In stock Zinc Plated Steel;Rubber Sandwich Mount with threaded stud absorbs the transmission of ...

Static load: 400 daN - 10,000 daN
Diameter: 101 mm - 305 mm

PRP Jacmount® Adjustable Levelers are excellently suited for quick and precise machine setups. The selected AirLoc types cover a broad range of machine setups. The special construction of the pressure plate makes it possible to compensate ...

Static load: 70 daN - 600 daN
Diameter: 50 mm - 138 mm

The B1 series is a unit manufactured by Airlock company. It is an adjustable lever that are deployed if the vibration is dependable. Its mounting sink was shaped in order for the ground unevenness to be leveled. It is ...

Static load: 150 daN - 14,000 daN

Flat GLP and GLP-S elements enable wide area load distribution for floors with low load bearing capacity or when large loads have to be set down softly. This is a very efficient solution which is available using standard components in many variations.

Static load: 31 N - 1,200 N
Diameter: 8 mm - 40 mm

The Type A buffer is made of natural rubber and 5.6 galvanized steel, and is suitable to use as a construction device for elastic bearings in applications such as assemblies, motors, pumps, etc... It has a temperature ...

Static load: 2,000 N - 35,000 N
Diameter: 10 mm - 150 mm

Static load: 2,000 N - 35,000 N
Diameter: 10 mm - 150 mm

Static load: 2,000 N - 35,000 N
Diameter: 10 mm - 150 mm

Static load: 80 N - 4,000 N
Diameter: 8 mm - 100 mm

Static load: 70 N - 6,000 N
Diameter: 8 mm - 100 mm

Static load: 4 kN - 131 kN

Areas of application Drive motor mounts - Generator frame units – diesel-electric Drive units – Single and double elastic mounts The highly elastic mounts of the T Series have been ...

Static load: 2.3 kN - 24 kN

... VD-S Series is suitable for permanently stationary applications. Benefits Optimal vibration-insulating performance with the help of several natural rubber compounds Easy ...

Static load: 0.4 kN - 7.9 kN

... railway and utility vehicles. The mounts are supplied with simple height adjustment for main drives. The alignment procedure is simplified by this fixture. The rubber element of the VDM Series is made ...

Our selection of Flat Male Anti Vibration Buffers are available in a huge range of sizes, manufactured from corrosion resistant Zinc Plated Steel and paired with a Natural Rubber. ...

Our Male to Male Threaded Bobbin Mounts are part of our Anti Vibration Bobbin range, featuring a Male Stud on either side of the mount. This design enables their installation into a female ...

Our Female to Female Threaded Bobbin Mounts are part of our Anti Vibration Bobbin range, featuring a double sided Female Thread. Designed for installation onto Male Studs, these Vibration ...

Anti-vibration components are products that are generally made of rubber - metal and that create the elastic connection between rigid objects, by cushioning relative motion while reducing ...

... angle, will enhance their vibration isolating feature. Compression-shear mounts are used to isolate vibrations in vibrating compaction plates and rollers; they provide ...

Circular cross-section elastomer sheet for machine feet

Static load: 4 daN - 700 daN
Diameter: 10 mm - 100 mm

Zinc Plated Double Male Cylindrical Mounting 60SH Product specification MAIN PART MATERIAL: NR/SBR rubber compound STANDARD HARDNESS: 60 Shore A HARDNESS TOLERANCE: +/- 5 SH ON REQUEST: Different screw lengths METALLIC ...

Static load: 27 daN - 88 daN
Diameter: 25 mm - 50 mm

... Mountings MMT Zinc Plated Double Male Cylindrical Mounting - Soft Type 45SH Product specification MAIN PART MATERIAL: NR/SBR rubber compound STANDARD HARDNESS: 45 shore A HARDNESS TOLERANCE: +/- 5 SH ON REQUEST:Different ...

Static load: 15 daN - 98 daN
Diameter: 15 mm - 40 mm

... Mountings MMX AISI 304 Stainless Steel Double Male Cylindrical Mounting Product specification MAIN PART MATERIAL: NR/SBR rubber compound STANDARD HARDNESS: 60 shore A HARDNESS TOLERANCE: +/- 5 SH ON REQUEST: ...

Diameter: 13 mm - 100 mm

Anti-vibration M. Compound rubber base NR 60º ± 5º shore A. Zinc plated steel spike or in stainless steel AISI 304. Cp: Maximum compression load (Kg). Cz: Maximum shear load (Kg). Available ...

SGOLATI anti-vibration. Composite rubber base NR 60º ± 5º shore A. Zinc plated steel spike. Suitable for holding devices very sensitive to vibrations, control panels, ...

Diameter: 48 mm - 158 mm

SYRIO antivibrant. Composite rubber base NR 60º ± 5º shore A and zinc plated steel. Suitable for applications that require good transversal flexibility, where the frequency is between 8 and 12 Hz. Used in combustion ...

The Regufoam® and Regupol® prevents the distribution of vibration forces, that come from technical equipment. The Regupol® is constructed from rubber fibers, rubber granulates as well ...

Diameter: 58, 54, 30, 40 mm

This elastic mount is specially designed to protect from severe vibration, shock and noise.

Diameter: 40 mm - 200 mm

... elastomer.The elastic mount consists of two parallel metal plates (with a threaded nut bonded) to a bell-shaped rubber inset and of a base plate with mounting lugs. These mounts allow ...

Diameter: 50, 76, 92, 124 mm

... armoured elastic mounts are compact low-profile mountings. They are easy to install and combines 3-way control of movement with relatively large deflection in the elastomer. They combine maximum anti-shock ...

Diameter: 6 mm - 100 mm

Material elastomer part:NR, black Material connecting piece:S235JR Form: Surface treatment:zinc-plated, chromated (CR VI free) Version:DIN 95363, Type A medium Hardness:approx. 55 Shore A Note ...

Diameter: 10 mm - 200 mm

Material elastomer part:NR, black Material connecting piece:S235JR Form: Surface treatment:zinc-plated, chromated (CR VI free) Version:DIN 95364, Type C medium Hardness:approx. 55 Shore A Note ...

Material elastomer part:NR, black Material connecting piece:S235JR Form:G Surface treatment:zinc-plated, chromated (CR VI free) Version:DIN 95364, Type G medium Hardness:approx. 55 Shore A ...

DESCRIPTION BJ type vibration damper comprising of galvanized steel plates, where in between natural rubber is vulcanized. The vibration damper is made in 3 different hardnesses ...

Static load: 1,029.7 N - 20,593.97 N

The RA-type mounts are anti-vibration elements which work the rubber in shear and compression with an optimal ratio of stiffness and horizontal stability. These mounts ...

... 55°shore A • black 65°shore A Type VD in neoprene rubber is used where the mount is in contact with oil. OPERTAIONS The Vibration damper is used to dampen noise and vibrations ...