Mineral lubricants

Viscosity: 0.000011 m²/s

... lubricity agents in combination with both sulfur and chlorine extreme pressure additives. Specifications Chemistry: Mineral Oil, sulfur, chlorine Viscosity (SUS): 65 Hazardous OSHA: Yes Hazardous ...

Viscosity: 0.000025 m²/s

... however, when used with materials such as soft copper, may produce stone loading. SPECIFICATIONS Chemistry: Contains no mineral oil, sulfur or chlorine Viscosity (SUS): 125 Hazardous OSHA: No Hazardous DOT: No Size ...

Viscosity: 0.000011 m²/s

... produce slightly higher honing performance than MAN-845 in automotive machine shop applications. SPECIFICATIONS Chemistry: Mineral oil, sulfur Viscosity (SUS): 65 Hazardous OSHA: Yes Hazardous DOT: No Size Available: ...

Operating temperature: -30 °C - 120 °C

SKF LGMT 2 is mineral oil based, lithium soap thickened grease with excellent thermal stability within its operating temperature range. This premium quality, general purpose grease is suitable for a wide range of industrial ...

Operating temperature: -30 °C - 120 °C

SKF LGMT 3 is mineral oil based, lithium soap thickened grease. This premium quality, general purpose grease is suitable for a wide range of industrial and automotive applications requiring stiff grease. • Excellent ...

Operating temperature: -20 °C - 110 °C

SKF LGEP 2 is mineral oil based, lithium soap thickened grease with extreme pressure additives. This grease provides good lubrication in general applications subjected to harsh conditions and vibrations. • ...

Viscosity: 0.000145, 0.000014 m²/s
Pour point: -15 °C

Good antiwear and anticorrosion properties. Excellent anti-oxidation properties allowing long time idle or very severe working conditions of the engine (hot climates, heavy load…). Low ash value ensuring a good engine cleanliness. Very ...

Viscosity: 0.00046, 0.00068, 0.001 m²/s
Flash point: 310, 306, 300 °C

Viscosity :ISO VG 1000 Good compatibility with seals. High ignition point. Benefits from advanced refining. Low carbone residue.

Viscosity: 0.000476, 0.000035, 0.00068, 0.000044 m²/s
Flash point: 306, 314 °C

Good seals compatibility. High ignition point. Very high lubricating power ensuring a very tough oil film at high pressures and temperatures. Very high resistance to water washout.

Operating temperature: 264, 249 °C
Viscosity: 0.00006, 0.000128, 0.000094 m²/s

... requirements, especially in circumstances of continuous operation: low vapor pressure even at high temperatures excellent lubricating properties low oil backflow excellent resistance to aging resistant to break-down minimum ...

Operating temperature: 0 °C - 160 °C

AMBLYGON TA 30/1 and TA 30/2 are long-term and high-temperature lubricating greases based on mineral oil and polyurea. These lubricating greases are used for long-term lifetime lubrication ...

CENTOPLEX 1 DL/2 DL are low-temperature greases based on an oxidation-resistant mineral oil and a lithium-calcium soap. Due to the good resistance to working under normal temperatures and loads these greases can be used ...

CENTOPLEX 2 and 3 are multi-purpose greases based on oxidation-resistant mineral oils and lithium soap. They meet the rolling bearing grease requirements according to DIN 51825 K. Due to the good resistance to working ...

... proprietary blend of lubricating solids make them especially suited for heavy duty and shock loading where Extreme Pressure (EP) characteristics are required. Molub-Alloy GM's formulation and the proprietary blend ...

... finish and dimensional accuracy. Our neat cutting fluid range based on plant based biodegradable ester and synthetic mineral oil technology has been developed to reduce mist and smoke. Neat cutting fluid range ...

Operating temperature: 90 °C

... multi-service to specialist chain lines, Castrol has the right chain oil for various applications and environmental conditions Mineral based chain oils for use in various chain and conveyor applications in operating ...

Operating temperature: -30 °C - 120 °C
Viscosity: 0.0001, 0.000011 m²/s

... and machine manufacturer´s instructions should be observed. Subsequent lubrication at the lubrication nipples by grease gun or by automatic lubrication system. Assess the lubrication ...

Operating temperature: -30 °C - 120 °C
Viscosity: 0.00011, 0.000009 m²/s
Flash point: 3 °C

... completely. The bearing and machine manufacturer's instructions should be observed. Subsequent lubrication at the lubrication nipples by grease gun. Assess the lubrication frequency and ...

Operating temperature: -25 °C - 80 °C
Viscosity: 0.0001, 0.000009 m²/s
Flash point: 100 °C

OKS 403 is a marine grease for lubrication of machine elements subjected to water or sea water. Areas of application Lubrication of open toothing, friction and rolling bearings, threaded spindles, ...

Operating temperature: -25 °C - 250 °C

APPLICATION COMPRESSIA is a lubricant for piston, oil injection and dry rotary air compressors, centrifugal compressors and vacuum pumps (ISO68 or ISO 100). TECHNICAL PERFORMANCES Exceptional oxidation resistance. Excellent ...

Operating temperature: 0 °C - 350 °C

For circulation heat transfer devices. In the chemical industry (heating of reactors, distillation columns, etc.), the thermal control of plastic injection moulds, the calendering of synthetic fabrics, the drying of sawn timber, reheating ...

Operating temperature: -25 °C - 250 °C

For the lubrication of pneumatic drills, burins and other pneumatic or hydraulic tools. Very good EP, anti-wear, rust-proofing and anticorrosive properties. Damp-proofing. Excellent adhesive properties. Exceed 3000 hours ...

Operating temperature: -10 °C - 300 °C

Drum of 200 liters of mineral heat transfer fluid with exceptional thermal oxidation resistance (-10 º C to 300 º C). Advantages: - Its low viscosity increases the flow velocity, prevents the formation of cock on ...

Operating temperature: -10 °C - 320 °C

200 ltrs. drum HTF mineral oil for heat transfer that can be used in any type installations with maximum outlet temperature of 305 °C boiler wall and maximum temperature in the boiler of 320 °C Mineral ...

An extremely fluid protective and anticorrosive lubricating oil for professional use. Specific for the lubrication of pneumatic tools, installations and equipment in the industrial and agricultural fields. It provides ...

A high performance neat cutting oil, designed for processing aluminium. It prevents overheating, quickly dispersing heat from the cutting station. Therefore guarantees steady finishing and accurate clean cuts whilst maximising disc and ...

A heavy-duty neat oil characterised by extreme fluidity, high cooling and detergent properties, ideal for processing aluminium. Fluid Pro CNC guarantees maximum efficiency to the lubricated parts, avoiding dust collection and clogging. ...

Operating temperature: 5 °C - 40 °C

Mineral oil free metalworking oil for medium to severe machining. Developed specially for medium to severe cutting of high alloyed steel. In addition to the use of high-alloyed and non-rusting steel, it also exhibits ...

Operating temperature: -33 °C - 238 °C
Viscosity: 0.000015 m²/s - 0.000117 m²/s

... 20.000 km or 250 hours. Excellent lubrication at cold start. Excellent lubrication at high temperatures.

Operating temperature: -30 °C - 230 °C
Viscosity: 0.000014 m²/s - 0.000104 m²/s

... or without turbocharger. This engine oil meets the needs of the majority of the European vehicle fleet. It is the ideal lubricant for widespread use in garages and mechanics workshops. Benefits Multifunctional ...

Viscosity: 0.000071 m²/s

... normal hardness. This emulsion is suitable for the machining of steel, aluminium and copper alloys. Safecut E 103 has a high mineral oil content. Benefits Low-foaming. Suitable for machining with significant ...