Monitoring analyzers

The fully automated FTIR spectrometer ERASPEC easily performs spectral fuel and oil analysis. Only at the push of a button ERASPEC delivers over 40 fuel parameters such as oxygenate concentrations or even complex properties like RON and MON within a few ...

... and chemical condition of oil, like oxidation, nitration, TAN and TBN.

Your features at a glance:

• Monitoring degradation, additive depletion, and contaminations
• Direct trending and spectral subtraction analysis

The CFC-free oil-in-water tester ERACHECK ECO easily measures the concentration of total oil and grease (TOG) and total petroleum hydrocarbons (TPH) in water and soil with sub-ppm precision. They deliver consistent results over a wide range of crude types ...

ISO 8573 compliant purity quantification of compressed air systems are bound to time-consuming installations and long-lasting test runs … We think it's time for a revolution: The S600 is unlike its competition. It combines latest sensor-technology, software-guided ...

... kept under control. In the ever quickening change of production, real time monitoring is crucial to protect your products' integrity. The SUTO S601 Compressed Air Purity Analyzer, measures and monitors contaminants in ...

... S605 Portable Breathing Air Analyzer offers a cutting-edge solution designed to ensure the highest standards of safety and quality in breathing air filling stations and breathing air systems. This state-of-the-art analyzer ...

... delivers effective combustion analysis Designed to measure O2 and COe in flue gases for improved combustion efficiency and reduced emissions, the SERVOTOUGH FluegasExact 2700 gas analyzer meets the most ...

... standard, for reliable CEMS monitoring of NH3 as a precursor to harmful particulates. Change is in the air with revolutionary TDL gas analysis Low maintenance, low cost-of-ownership EPA-compliant CEMS monitoring The ...

... The SERVOTOUGH Oxy 1900 is a digital oxygen analyzer for hazardous area use. Offering industry-standard features alongside revolutionary, value-added options, the Oxy 1900 oxygen (O2) gas analyzer sets new standards ...

... consumed) • Capturing and recording of power supply events (shutdowns, interruptions, swells, dips) • Inrush currents monitoring and recording • Waveform/inrush displaying, snapshot and recording • Transients recording • Power quality ...

... laboratory use, but also an excellent solution for monitoring electrical networks in new installations. - Multifunction network analyzer supplied with 3 Rogowski coils - No need for external integrators at the analyzer ...

... specifications / Features: - Panel size: 96x96 mm - Single-phase system compatibility - Multifunction network analyser - Supports advanced monitoring and diagnostics - Expandable with communication and output modules ...

... Multifunction analyser for use in DC systems. The voltage input is directly connected to the line, while the proportional current input is derived from shunts. The primary current value can be set via a simple programming menu. It has ...

... process is an important step in juice purification in a sugar factory. The on-line process analysis enables continuous process monitoring of the beet juice, enabling immediate process regulation. The automated sampling process optimizes ...

... unlike other TOC analyzers. These water analyzers are designed to fit harsh environmental monitoring, municipal facilities, and industrial manufacturing applications. One of the best benefits of the ...

... For Mission Critical Industries Our MBW CALIBRATION™ MODEL 373™ Dew Point Chilled Mirror Analyzer has been measuring humidity for almost 20 years. Incremental development based on operational experience and customer feedback means that ...

... Cost-Effective Humidity and Temperature Reference Analyzer Our MBW CALIBRATION™ MODEL 473™ Dew Point Chilled Mirror Analyzer is our most cost-effective dew point instrument and performs like our high-end chilled mirror ...

R203 is an extremely versatile Universal Input Energy power meter with a wide range of current measurement inputs. It can handle voltage-transduced currents, direct voltages, and Rogowski sensors with voltage output up to 333 mV. This instrument offers ...

... Model S203TA-D is a complete three-phase network analyzer, with a display, suited for use with up to 600 Vac voltage range, and max current equal to 5A connected to the inputs. The instrument provides all the following electrical measurable ...

... The airmoF is an automatic analyzer designed for continuous, real-time monitoring of formaldehyde in air. Using microfluidic Hantzsch reaction with fluorescence spectrometry, it delivers high sensitivity (down to 0.1 ...

... pollution control - Indoor measurements - Plant/process emissions monitoring - Industrial hygiene - Fence line monitoring - Ambient air control for PAMS and TO14 - Wastewater plant monitoring (Purge and ...

... Urban/Non-urban area pollution control Indoor measurements PAMS/CE analysis Out of plant process monitoring Industrial hygiene Fence line monitoring VOC screening in the food and beverage industry ...

... Viscosity analyzer at reference temperature THE MOST ECONOMICAL ON-LINE VISCOSITY ANALYZER ON THE MARKET The most economical online viscosity at reference temperature analyzer. Using the robust ...

... THE ALL-IN-ONE HEAVY-DUTY VISCOSITY ANALYZER AT REFERENCE TEMPERATURE The most cost effective online viscosity at reference temperature analyzer. With its integrated sampling system,Thermoset-CF requires no extra ...

... high-performance formaldehyde gas analyzer designed for continuous emission monitoring in high-temperature gas streams up to 300C. Using advanced NDIR single-beam technology with vacuum reference cell, this analyzer ...

... concentration monitoring with exceptional accuracy and long-term stability. Ideal for chemical industry process control, refrigerator recycling safety monitoring, pharmaceutical inertization, environmental emission monitoring, ...

... Biomethane analyzer provides reliable online measurement of methane (CH4) up to 100 Vol.-% for grid injection, fuel cells, and power-to-gas applications. Utilizing proprietary NDIR dual-beam technology with heated cuvette (60C), this ...

... Ion sensitive determination of Ammonium, Nitrate or Fluoride Low operating costs due to reagent free operation Minimal maintenance due to integrated sensor cleaning Flexibility to monitor additional parameters with ion sensitive electrodes ...

... Differentiated photometric determination of chlorine according to AWWA 4500-Cl G / EN ISO 7393-2 Continuous and simultaneous analysis of free, bound and total chlorine Freely adjustable measuring intervals for optimized use of reagents Fast and easy ...

... Photometric ozone measurement per DIN 38408-3 Reliable measuring results without sensitivity loss even after longer absences of ozone Automatic zero point calibration before each measurement guarantees high reproducability at low detetction limit ...

... Many questions about foam, one universal approach: The DFA100 Dynamic Foam Analyzer measures the foamability of liquids and the stability of quickly decaying or long lasting foam based on reproducible foaming and height detection. With ...

... Laboratory particle counter for aqueous fluids with precise flow control for contamination monitoring, size distribution analysis and component cleanliness control The system PAMAS SVSS is a standard laboratory particle counter for ...

The PAMAS SBSS WG is a particle counting system for bottle samples. The system is adequate for the measurement of water based hydraulic fluids (Water-Glycol) used in the off shore industry. The instrument may be programmed to measure a sample without ...

... Operation and Analysis Process The ELEMENTRAC CS-r analyzer determines the elements carbon and sulfur by combustion of the sample in an oxygen stream and subsequent measurement of the combustion gases ...

... ELTRA‘s CHS-580A is the ideal elemental analyzer for simultaneous determination of carbon, hydrogen and sulfur in organic samples. It features a resistance furnace with vertical ceramic tube and uses ceramic crucibles as sample carriers. An ...

... ELTRA’s CW-800M analyzer is designed for fractional analysis of carbon and water in one single operation. It is based on the proven technology of the CW-800 but has a modified furnace which allows fast adjustment of the temperature in ...

The MAT1100 is the right choice whenever you only need to be concerned with the oxygen concentration or whenever only nitrogen is used. Its electrochemical oxygen cell (EC) measures within the range of 0.5 and 35 volume per cent and with an accuracy of ...

If you need to measure the concentrations of oxygen and carbon dioxide, then the MAT1200 will be the appropriate model. In addition to an electrochemical oxygen cell, it features a non-dispersive infrared sensor (NDIR) for the CO2 measurement over the ...

... Ethernet, RS-232) • Any number of measurement methods for the monitoring of the measurement process according to method, batch, product and/or production line incl. limit value monitoring • Inteligent unser administration • ...

... the negligible cross-sensitivity towards other sample gas components, the portable M&C oxygen analyzer PMA10 has a wide variety of applications. The analyzer is a suitable and reliable instrument for measuring oxygen ...

... components, the M&C oxygen analyzer PMA20 has a wide variety of applications. The analyzer is a suitable and reliable instrument for measuring oxygen concentrations in various gas analytical control applications including ...

... portable M&C oxygen analyzer PMA30 has a wide variety of applications. The analyzer is a suitable and reliable instrument for measuring oxygen concentrations in various gas analytical control applications including flue ...

... On-line monitor with microprocessor control for water hardness analysis (with display of water hardness) Two set points of alarm from English degrees: 0,03 – 37,59°e ppm: 53,4 – 534ppm mg/l: 53,4 – 534 mg/l mmol/l: 0,004 – 5,3 mmol/l French degrees: ...

... Analysis of water hardness (with good water/not good water signal) Multifunctional microprocessor analyser for water hardness analysis with alarm set point for: French degrees: 0,05 / 0,09 / 0,18 / 0,36 / 0,54 / 0,9 / 1,8 / 3,6 ...

... Definitely the correct and reliable measuring value Since 2012 … our DUROMAT analysers stand the test in the daily use. The DUROMAT XX is used to monitor the limit value. In addition to the current measured values, the display also ...

... The Arc Infrared Carbon and Sulfur Analyzer is an instrument used in conjunction with the WI-H86B automatic ignition furnace. The analyzer can precisely perform content determination of carbon and sulfur in materials ...

... The High-frequency Infrared Carbon & Sulfur Analyzer is suitable for carbon and sulfur determination of steel, iron, alloy, foundry core sand, non-ferrous metals, cement, ore, coke, catalysts, magnetic materials, ceramics, inorganic, ...

... Meeting the standard: PRC national standard“HJ637-2012 water quality the determination of petroleum and animal and plant oil Infrared photometric method” Technical principle: According to HJ637-2012 standard, extract the oil material in the water using ...

... Applications**

• Online air monitoring
• Industrial production process monitoring
• Industrial combustion efficiency monitoring
• Desulfurization process monitoring
• Denitration

This series of analytical instruments are disinfectant analytical instruments with a microprocessor. The instrument adopts an LCD liquid crystal display screen, and intelligent Chinese/English menu operation. It has current out put, a wide measurement ...

... realize real-time water quality monitoring and remote transmission of multiple measurement indicators by selecting different sensors according to different customer needs. It is widely used in water quality monitoring ...

... br>

• Reverse osmosis (RO) pretreatment and feed water monitoring
• RO membrane protection to prevent oxidative damage
• Desalination plant pretreatment and process monitoring
• Industrial pure

... Product description
Wally Go Diamond is a portable instrument designed for the rapid and reliable analysis of diamonds. It allows you to verify within seconds whether a stone is a natural or synthetic diamond.

Application

• Portable

... High-Performance LEL Monitoring
A monitoring system designed to deliver the highest level of accuracy and reliability for LEL (Lower Explosive Limit) control in ovens and ducts, suitable for a wide range of industrial ...

... LEL Monitoring and Flammable Gas Detection for Ovens, Ducts, and Process Streams
The Sagittarius 5000 is an infrared-based analyzer designed for continuous monitoring of LEL (Lower Explosive Limit) ...

... sampling pump is included to prevent any condensation of the sample. The analyzer is also equipped with sensors to monitor vacuum levels in the sampling lines.
The analyzers are designed and manufactured in compliance ...

... following parameters: 0 - 25% O2. 0 - 10,000 ppm O2. The option of two self-adjusting O2 measurement scales for monitoring oxygen levels over the entire measurement range. 0 - 20,000 ppm CO2. 0 - 12 Mg O2/liter A dissolved ...

... The VAR18 analyser has been designed to monitor the quality of breathing air in compressed air networks. It is available in a case or cabinet. Measured values comply with standard EN12021. Features : Continuous monitoring ...

... The MicroVAR 350 transportable breathing air analyser has been designed to check the quality of breathing air leaving a compressor. Available in a suitcase, the MicroVAR350 is suitable for one-off measurements during qualification or ...

... Rugged Zirconia analyser for ppm or % Oxygen measurements in combustion & inert gas. The instrument features a special Zirconium Oxide sensor with reference to the solid state (micro-pod technology) eliminating the need ...

... Zirconia analyser for ppm or % Oxygen measurements in non-combustible & inert stream gas. The G405 is an extractive Zirconia analyser housed in a rack 19” case, typically used for in line O2 traces measurements in pure ...

... for measuring CO or CH4. It can be widely used in environmental online monitoring, industrial process control, safety monitoring, etc. Measureable Gas Nitric Oxide [NO] Oxygen [O2] Chlorine [Cl2] Nitrogen Dioxide ...