Diameter: 12, 15, 13, 18 mm
Operating temperature: -30 °C - 70 °C
... Material: PE-LD Colour: Black Flammability: V2 (UL94) Working temperature: -30°C ~ +70°C All dimensions are in mm ...
Fastpoint Srl
... NO.Number for ProductApplicationMeterial 01DEC2020Assemble part for 20mm profile frame(연결부품)PVC/AL 02DEC3030Assemble part for 30mm profile frame(연결부품)PVC/AL 03DIC4040Assemble part for 40mm profile frame(연결부품)PVC/AL 04DEC4040Assemble part for 40mm ...
... JM Cap for 20×20 profiles Part# C0201-5.0mm C0201-3.0mm Material: Nylon Color: Black Uesd for: 20×20 series profile Hole: 5.0mm 3.0mm JM Cap for 20×40 profiles Part# ...
... Gray closing cap for Profile - Groove 6 Size 30 - Measurement: 13 mm x 30 mm - Type of material: Polyamide ...
Diameter: 12 mm - 105 mm
Operating temperature: -55 °C - 110 °C
... HSSE/HSEC (Cable End Caps With Spiral Adhesive) • Crosslinked Polyofeline • Excellent Sealing properties • UV and weather resistance • Operating temperature: -55° C to +110°C • Min. full recovery temp.:120°C • Available with or without ...
Arihant Panel Fittings Private Limited
... DESCRIPTION - Black Luster® Steel Push Caps provide best in class decorative appearance and better corrosion resistance than black oxide and zinc plated finishes. Resistant to 1,000 hours of salt spray per ASTM B117*. Push Caps ...
... Blind Hole Cover Caps, Protective Caps, Caps for Screws, Insulation Boots Since 1964 the innovative family business Ettinger GmbH has been your dependable partner for electronic and mechanical components. ...
Diameter: 8.4 mm - 172.2 mm
... and circular cross section of the cap prevent the cap from splitting during fitting and use. Our standard colour is black, ensuring the UV stability of the cap and preventing premature damage or fading. PROTECTION ...
RADOLID Thiel
Diameter: 2.5 mm - 104.6 mm
Operating temperature: -51 °C - 315 °C
... REFERENCE: SC DESCRIPTION : Silicone Cap 315ºC MATERIAL: High temperature Silicone 315ºC See the material data sheet DIMENSIONAL TOLERANCE The dimensional tolerance of the Silicone Cap is according the RMA A3 APLICATIONS: Powder ...
Diameter: 8.2 mm
Operating temperature: -20 °C - 85 °C
... Features Available in various colours Various fittment options available Availablity of press fit designs ...
Elcom
Diameter: 1.4 mm - 18 mm
Operating temperature: -40 °C - 125 °C
... Adhesive lined, heat shrink insulating caps specifically designed to insulate, seal and protect end or stub splices in wiring harnesses and electronic assemblies. High shrink ratio allows fewer sizes to cover a wide range of profiles Seals ...
Diameter: 4 mm - 2,890.8 mm
... Specification Pipe cap Standard colour: Natural/Yellow/Black Material: Polyethylene PE-LD ...
Poliamid Plastics
... Optimum® tip caps and end caps provide an airtight seal that allow you to pre-fill syringe barrels to save time or seal partially-used syringes between shifts to reduce waste. Tip caps protect assembly ...
... Lens Cap with Cap Strap is only compatible with T-10 ...
Protects the optics of the instrument from wet or viscous samples.
Operating temperature: -40 °C - 105 °C
... Protective cap, Range of articles: ArcZero, color: black, rated voltage: 800 VDC, Fit the protective cap when not plugged in., scope: DC-Grids ...
Diameter: 20 mm - 225 mm
... Cap MV SDR 11 Gas, water and H2 Safety technology DVGW test mark: DV-8601AU2248 and DV-8606AU2249 Areas of Application The FRIALEN-End Caps MV are used to close HD-PE pipe ends. Also recommended as fused ...
Aliaxis
... at 10 kV in accordance with IEC 60900:2018 5.5.3. Material: semi-rigid PVC. Standard packaging quantity (SPQ): 5 caps. ...
Diameter: 20 mm - 500 mm
... Long spigot end cap for butt welding PN10 SDR 11 - S 5. Series of fittings designed for conveying fluids under pressure with a weld connection system (butt welding). ...
Diameter: 20 mm - 63 mm
... Series of fittings designed for conveying fluids under pressure with a cold chemical weld jointing system (solvent welding) using a suitable solvent cement (TemperGLUE WELD-ON) and cleaner-primer.
... Self-Clamping Slip-On Caps 1000V • For insulating the ends of cables and individual cores • As protection while working on live parts • With self-sealing cross-cut cover • Made of viscoplastic insulating material ...
... End caps for additional protection of sharp objects • prevents the content from penetrating • made from impact resistant ABS • end caps can be clipped on the bottom of the BlockPack outer and inner part • end ...
rose plastic
Diameter: 10 mm
... Cap designed to protect and enhance the finish of EOZ push buttons. Made of durable material, it provides protection against dust and splashes while providing a neat aesthetic appearance. Easy to install, this cap is ...
... plant, storage, and trailer floors. The 40″ x 48″ StakCap is a single-sheet thermoformed (HMWPE) top cap. The geometry of the StakCap allows the top cap to be used with ORBIS 24″ x 20″ and 24″x 16″ totes. The StakCap ...
Diameter: 50 mm
... End cap Ø 50mm Galvanised steel end cap 50 mm diameter ...
... Protection caps for Flush Button SeriesAUXILIARY CONTROLS, PegasusAutomation - TipologyProtection caps ...
Giovenzana International B.V.
Composition is dolomite, purity and strength is high, heat preservation and insulation is good.
the best suppliers