Nuts

Nuts made of molybdenum and the molybdenum alloy TZM are available in the Plansee Online Shop. Order fast and easily from the producer's online shop: www.plansee.com/shop

Nominal diameter: 6 mm - 30 mm
Height: 45 mm - 109 mm
Width: 45 mm - 108 mm

Nominal diameter: 8 mm - 48 mm
Height: 43.5 mm - 211 mm
Width: 34 mm - 162 mm

Nominal diameter: 3 mm - 20 mm
Height: 8.6 mm - 33.8 mm
Width: 17.6 mm - 68.5 mm

Nominal diameter: 8 mm - 16 mm
Height: 12 mm - 24 mm
Width: 13 mm - 24 mm

Fixture nuts according to DIN 6330 have a spherical surface to match conical seats DIN 6319 (EH 23050.). With this combination of fixture nut and conical seat, non-parallel clamping surfaces can be ...

Nominal diameter: 8 mm - 16 mm
Height: 9 mm - 24 mm
Width: 13 mm - 24 mm

The collar nuts (flanged nuts) are manufactured accoring to DIN 6331. Material Heat-treated steel, tempered, quality 10, phosphated

Nominal diameter: 8 mm - 16 mm
Height: 24 mm - 48 mm
Width: 13 mm - 24 mm

In comparison to a hexagon nut according to DIN 6330, the extension nuts are elongated and are particularly suitable as a connecting piece for stud bolts. Material Heat-treated steel, tempered, ...

Nominal diameter: 4 mm - 10 mm
Height: 13 mm - 28.5 mm
Width: 16 mm - 32 mm

Nominal diameter: 10, 8, 6 mm
Height: 26.5, 22.5 mm
Width: 58, 46 mm

Nominal diameter: 2 mm - 24 mm
Height: 1.6 mm - 21.5 mm
Width: 4 mm - 36 mm

Plastic nuts and bolts fasteners are used to fasten together plastic or metal component. Nylon nuts and bolts are non-corrosive, vibration resistant and anti-magnetic. Plastic nuts are ...

Nominal diameter: 5, 8, 6 mm
Height: 4.2 mm - 6.5 mm
Width: 8 mm - 13 mm

Plastic nuts and bolts fasteners are used to fasten together plastic or metal component. Nylon nuts and bolts are non-corrosive, vibration resistant and anti-magnetic. Plastic nuts are ...

Nominal diameter: 3 mm - 16 mm
Height: 3.2 mm - 15.8 mm
Width: 7 mm - 36 mm

Plastic nuts and bolts fasteners are used to fasten together plastic or metal component. Nylon nuts and bolts are non-corrosive, vibration resistant and anti-magnetic. Plastic nuts are ...

Self-clinching rivet nuts from series 10.455 and 10.456 are riveted into the component. A shaft is passed through a pre-punched hole in the component and riveted on the opposite side. The base material is not deformed ...

The self-clinch nut is a threaded fastener that has a knurl and a notch. The knurl ensures while embedding into the metal sheet the displaced material to spread evenly in the notch. This ensures an especially good stability. Advantages: ...

... rivet nut provides a locking device to avoid the turning of the insert in the component. These knurled blind rivet nuts are used preferably in components with lower regidity (component ...

Nominal diameter: 3 mm - 30 mm

DIN 1587, UNI 5721 hex domed cap nuts Technical details DIN - 1587 UNI - 5721

Nominal diameter: 38.1 mm

DIN 431 GAS threaded hexagon pipe nuts Technical details DIN - 431

Nominal diameter: 1.6 mm - 48 mm

DIN 439, ISO 4035 thin hex nuts Technical details DIN - 439 ISO - 4035

Manufacturing Process CNC Machining & Injection Molding PEEK material performance Polyetheretherketone (PEEK) is a high-performance, engineering thermoplastic characterized by an unusual combination of properties. These properties ...

... requires little time for processing, a limited number of tools and a familiarity that is acquired in a very short time. The nuts and bolts required by the construction system with extruded profiles are reduced to a few ...

... requires little time for processing, a limited number of tools and a familiarity that is acquired in a very short time. The nuts and bolts required by the construction system with extruded profiles are reduced to a few ...

... screws, special nuts and dedicated accessories are the glue of the entire modular construction system of extruded aluminum profiles. the larger support surface allows to increase the tightening torque with respect ...

Kansai Special 41-1540-0 needle thread tension nut.

Genuine Juki 22921308 thread tension nut for use with Juki DDL series machines.

Nominal diameter: 12, 16, 20, 24 mm
Height: 19, 10, 13, 16 mm
Width: 36, 19, 24, 30 mm

SHNDS is a duplex stainless steel hexagon nut. Duplex stainless steel has the great properties of both austenitic and ferritic steel. It has an excellent strength and corrosion resistance compared to SUS316L. It is ...

Nominal diameter: 3 mm - 10 mm
Height: 2.4 mm - 8 mm
Width: 5.5 mm - 17 mm

Hex Nuts / Hex Flange Nuts - Titanium Specific gravity is approximately 60% of stainless steel. Nonmagnetic. Excellent chemical and seawater resistance. Chemical polishing and brightening processing ...

Nominal diameter: 6 mm - 16 mm
Height: 5 mm - 13 mm
Width: 13.5 mm - 30 mm

SHNRS is a theft prevention nut for security purposes. It can be mounted with commercially available tools and no extra tools are required.. For removal, the dedicated removal tool SKW is required. Only cover nuts ...

Nominal diameter: 4 mm - 18 mm

Compression Fittings Type 200 – Brass fittings – High resilience due to cutting ring and nut – Cutting rings in line with DIN 3861 – Swivel nuts in line with DIN 3870 – Nickel-plating for corrosion ...

Nominal diameter: 2 mm - 12 mm
Height: 1.5 mm - 9.06 mm
Width: 6.3 mm - 20.6 mm

Self-clinching nuts for sheet metal sheet hardness max 80 HRB

Nominal diameter: 3 mm - 6 mm
Height: 6.35 mm - 11.1 mm
Width: 4.22 mm - 8.73 mm

Self-clinching blind nuts for sheet metal sheet hardness max 80 HRB

Nominal diameter: 2 mm - 20 mm
Height: 3 mm - 16 mm
Width: 5.5 mm - 27 mm

Hexagonal self-clinching nuts for sheet metal sheet hardness max 80 HRB

Nominal diameter: 6 mm - 24 mm
Height: 8.2 mm - 25.5 mm
Width: 10.8 mm - 39 mm

... assemble and economically advantageous bolt securing system due to the flexible, glued connection of nut and Wedge Lock Washer. Standard hexagon nuts according to ISO 4032 are combined with our proven ...

Nominal diameter: 20 mm - 160 mm
Height: 37 mm - 191 mm

HEICO-TEC® Tension Nut For a secure joint with a HEICO-TEC® Tension Nut, no electric, hydraulic, or pneumatic tools are needed. All you need is a torque wrench. The HEICO-TEC® Tension Nut ...

Nominal diameter: 20 mm - 160 mm

... direction, or if a comparably moderate preload level needs to be generated in relation to the classic, high-strength Tension Nut Series (Strength Class 8 and 10). The aim is to realize the best out of the available ...

Nominal diameter: 6, 4, 5 mm
Height: 5 mm
Width: 7.8 mm

Can subsequently be swung into the groove, the ball prevents sliding even in vertical mounting positionMaterial: zinc-plated steelColor: galvanizedPackaging Unit: 50 pcs.

Nominal diameter: 4, 5 mm
Height: 4.4 mm
Width: 10 mm

T-nut slot 6 guided web. Material: Zinc platted steel Color: Galvanized Packaging Unit: 50 pcs.

Nominal diameter: 4 mm - 8 mm
Height: 6 mm
Width: 16 mm

T-nut slot 8 guided. Material: Zinc plated steel Color: Galvanized Packaging Unit: 50 pcs.

Wing nuts PA 6.6, natural colour natural material PA 6.6 weight 1,58 g country of origin Germany customs tariff number 39269097 RoHS RoHS compliant

Hexagon nuts in PA or PP from M2 to M16 colour natural material PA 6.6 weight 0,05 g country of origin Germany customs tariff number 39269097 RoHS RoHS compliant

Nominal diameter: 12 mm - 24 mm

"Non-corroding, resistant to moisture, steam and seawater. Electrically isolating, stable to creepage. High mechanical strength, up to 600 kg/cm². Frost and heat resistant: -30°C up to +120°C."

Shielding type with ball bearings. You can get the stable high accuracy of TIR. Roughly 30% of clamping power being increased as compared with the S-type. Utilize for heavy cutting.

Smaller size than NA type, so best suitable in case that cutting area is small. The inner diameter is same size as NA type but diameter is smaller than NA type so you can avoid interference.

Thickness is made still thinner than NA type. Note: The size of M thread is diff erent.

Nominal diameter: 19 mm - 25 mm

T-Nuts Our Locking T-Nuts or Pronged Tee Nuts as they are also known, are manufactured from a high performance zinc plated steel, which provides an excellent level of resistance and ...

Nominal diameter: 12 mm - 14.5 mm

Cone Shaped E-Nut All of our Cone Shaped E-Nuts are manufactured using a silver zinc alloy, which provides an extremely strong and durable solution capable of a number of different uses. Threaded E-Nuts ...

Nominal diameter: 7.8 mm - 16 mm

D-Nuts All of our Metal Threaded D-Nuts are manufactured using a high quality Zinc Alloy which provides optimal strength when paired with externally threaded products. Common for their use as furniture ...

Rivet Nuts for automotive Blind rivet nuts and bolts Rivet nuts and studs

Automotive parts Self-Clinching Nuts, Stud and standoffs Clinch & sheet metal fasteners Cage nuts

Nominal diameter: 2 mm - 24 mm
Height: 1.2 mm - 21.5 mm
Width: 4 mm - 36 mm

... Dimensions : mm - EC4032 Hexagon nuts DIN 34814 ISO 4032 (DIN 555/934) - EC4161 Hexagon nuts with washer DIN 6923 ISO 4161 - EC4035 Hexagon nuts flat DIN EN ISO 24036 (DIN 439) ...

Nominal diameter: 3 mm - 16 mm
Height: 3.2 mm - 15.8 mm
Width: 5.5 mm - 36 mm

... Dimensions : mm - EC4032 Hexagon nuts DIN 34814 ISO 4032 (DIN 555/934) - EC4161 Hexagon nuts with washer DIN 6923 ISO 4161 - EC4035 Hexagon nuts flat DIN EN ISO 24036 (DIN 439) ...

Nominal diameter: 8 mm - 14 mm
Height: 2.5 mm - 8 mm
Width: 13 mm - 36 mm

... request Dimensions : mm - EC4032 Hexagon nuts DIN 34814 ISO 4032 (DIN 555/934) - EC4161 Hexagon nuts with washer DIN 6923 ISO 4161 - EC4035 Hexagon nuts flat DIN EN ISO 24036 (DIN 439) ...

Nominal diameter: 18, 22, 26, 32 mm
Height: 13.5, 17, 20.5 mm

Includes spherical nut and spherical washer. Made from alloy steel with a black oxide finish.

Nominal diameter: 6 mm - 24 mm
Height: 18 mm - 72 mm
Width: 10 mm - 36 mm

Also known as extension nuts, they are commonly used in jig and fixtures to provide height adjustments. Made from heat-treated1045 alloy steel with a black oxide finish.

... metallic materials, in various shank lengths and thread designs, provides heavy-duty threads even for thin sheet metal. Insert nuts in various heights and materials Heights and materials Thread ...

... carbon,... Good anchoring due to the serrated spring rings (crowns) Quick and easy press-fit installation The insert is used to create threads in marble, granite or other natural stone, composite materials, ...

Keep Nut stainless steel AISI 316L Self-anchoring threaded sleeve with one to four rings and an internal threaded sleeve; with/without head; in stainless steel AISI 316L and plastic Anchor for rear fixing of facade ...