- Hydraulics - Pneumatics >
- Filter and Separator >
- Oil separator
Oil separators
Flow: 1.5 l/s - 150 l/s
... Class I Separators accordance with EN-858, effluent less than 5 ppm Outlet security device Access covers Class C250 accordance with EN-124 MPak® plate packs: frame in steel and plastic hardware media is oleophilic polypropylene Plate ...
Facet International
... grease separators or flotation systems is essential. The grease separator is designed for smaller application, such as yachts and offshore platforms, removing fats, oil and grease statically. Automatic ...
... equipment from condensate, oil, and particulate entrained in the gas stream Multi-stage separation 316 SS vane pack and/or demister pad for heavy condensate and oil removal 99.97% efficient at 0.3 micron ...
... Ferro Density Separator is specially design to allow complete separation ofa variety products based on their density. It is the combination of densityseparator & basket beater separator for better operational results ...
Flow: 10, 20, 50 us gal/min
Width: 35, 26, 76 in
... RGF’s oil water separators are designed to eliminate pollution problems by avoiding contaminated water discharge. It is a compact pre-treatment technology system designed to remove free oils from water ...
RGF environmental group
... • Separation and recovery of the oil carried by the refrigerant in vapour phase at compressor outlet of refrigerating and air conditioning installations. • The TURBOIL® oil separators limit the amount ...
CARLY
... unit, thickness and flow rate. The VITONE ECO Vertical Separators along with disks are units manufactured out of stainless steel at superior withstanding capability. The VITONE ECO Vertical Separators have a maximum speed ...
... Rated at 1 quart per hour Skims underneath conveyors Skims across elongated surface areas Skims oil spills Industrial-grade oil pick up tubing Ceramic scraper wipes tube clean Ceramic scraper lasts ...
Zebra Skimmers Corp.
... Benefits Adaptable to existing tanks Longer life for coolants Lower disposal costs Self cleaning Automatic and continuous operation Low purchasing costs Energy saving Parts in contact with liquid in stainless steel Minimal maintenance ...
Flow: 0.25, 2 l/s
Width: 270, 437 mm
... CG-AUT Automatic grease trap Pretreatment Oils and grease separation. ...
... . The coolant flows into the separator tank of the oil separator Skimmtelligent mini. The coolant mixed with tramp oil flows through parallel plates ...
FRIESS GmbH
Flow: 0.2 m³/h - 5 m³/h
Length: 660 mm - 2,400 mm
Width: 400 mm - 900 mm
... The oily water separator is supplied as a compact modular system, with internal piping and wiring. It is ready to use by connecting the suction and discharge lines as well as the central power supply. The oily water separator ...
Flow: 9.6 m³/h - 960 m³/h
... The oil and water separator is used to dry compressed air and other industrial gases. The separator ensures the fault-free and efficient operation of compressed-air and gas consumers ...
Weight: 25 kg - 87 kg
... Filtering Type Oil-water separator Filtering Type Oil-water separator No power natured oil-water separator. Simply replace the filter. Filters ...
ENE SYSTEM
... The Blocks with frame O are Lamellar packs designed with frame for oil segregation. They are structured with a parallel channel lamellar pack made of durable polystyrene. They are made with resistance against UV radiation and enclosed ...
Flow: 7,200 m³/h
... separates condensate from the compressed air. As condensate consists of 97% water, it is very important to separate it from the 3% oil/impurities, so water can be disposed of through the drain. ...
Flow: 35 l/min - 1,500 l/min
... ferrous machining applications. These magnetic separators can be used to clean both emulsions as well as neat oil and do not need to be equipped with consumable filter material. Magnetic filter ...
Flow: 200 l/h - 400 l/h
Width: 500 mm
Filtration size: 350 µm
The TB 250 has a 200 to 400 l/h throughput and 350 µm pre-filter. Its angle section is made of stainless steel and operates without electrical connection. Some of its advantages include having an adjustable flow rate, providing lower waste disposal cost ...
Flow: 20 l/s
... A grease trap is a device intended to separate and store solid materials, fats and oils of animal and vegetable origin contained in gray water. User benefits Drain tap Installer benefits Placement on the ground or on gratings ...
SIMOP INDUSTRIE
... vast range of oil management and control products: oil separators, oil level regulators, oil filters and oil reserves. All products ...
Flow: 6 us gal/min - 132 us gal/min
... Polytech magnetic separators have been designed to remove ferrous and non-ferrous solid contaminants from coolants and oils. Magnetic separators can substantially reduce filter cartridge ...
Flow: 170 m³/h - 3,600 m³/h
Weight: 5 kg - 67 kg
... condense contaminated by oil. This liquid cannot be discharged in the outdoors and has to be treated by a specialized company in order to protect the environment. ATS developed the Gold series of oil water separators ...
... For oil separation, ALPHA TECHNOLOGY provides 3-phases production separator. The production separator is a pressurized vessel designed to efficiently separate effluents. Design of Separators ...
... The MARK FOD 21 - 1440 Oil-Water Separator is the perfect system to separate oil from water in your compressed air system. It protects the environment and saves costs! Oil-Water Separators Once ...
the best suppliers
Subscribe to our newsletter
Receive updates on this section every two weeks.
Please refer to our Privacy Policy for details on how DirectIndustry processes your personal data.
- Brand list
- Manufacturer account
- Buyer account
- Our services
- Newsletter subscription
- About VirtualExpo Group