Oil solenoid valves

DN: 0.125 in
Voltage: 24, 220, 110 V
Temperature: -10 °C - 140 °C

... The solenoid valves series "W" can be directly actuated, servo-assisted or with mixed actuation. These solenoid valves, produced in the 2/2 N.C. pneumatic function, are used in several ...

DN: 0.375 in - 1 in
Temperature: -10 °C - 100 °C
Pressure: 0 bar - 14 bar

DN: 3 mm
Voltage: 220, 240 V
Temperature: 200 °C

... Stainless Steel (AISI430 Fr). Spring - Stainless Steel (AISI 302). Wire - Enameled Copper Class HR 200C (IEC 60317-8) Media Oils at high temperature, solvent, Silicon fluid, air, LCP, NVC, Di-Ester lubricant based,Qxigen and steam (180°C). ...

Voltage: 24 V
Temperature: -20 °C - 90 °C
Pressure: 0 bar - 350 bar

... Performances and calibrations are carried out by using hydraulic oil with 30 cSt viscosity at 50°C Recommended viscosity 10 ÷ 420 cSt Working temperature -20 ÷ +90 °C Absolute filtration 25 μm ...

DN: 4 mm - 50 mm
Voltage: 12 V - 240 V
Temperature: 0 °C - 65 °C

... 50mm Pipe size: 3/8”-2” Fluid Media: Water、Hot Water、Air、Gas、 Oil Etc Flow as the arrow, mounts in any position; Best position is Solenoid vertical and upright direction. This sériés valves are offered ...

Voltage: 6 V - 480 V
Temperature: 180 °F
Pressure: 200 psi

... -01/636-01 Solenoid Control Valve is designed with on/off controller. It either opens or closes after receiving an electrical signal to the solenoid pilot control. This valve consists ...

DN: 6, 8, 10 mm
Voltage: 24, 12, 220, 110 V
Temperature: -20 °C - 100 °C

... GAG series are direct acting solenoid valve compatible with various fluids. Compatible with various applications through a wide variety of compatible materials, orifice sizes and coil options.Corrosion resistant, suitable ...

Voltage: 12, 24 V
Temperature: -30 °C - 50 °C
Pressure: 210 bar

... selection valve can be realized in the different flow pressure between the oil road switch. Multiple directional valves can be connected to feed oil into or out of different devices. ...

DN: 6 mm - 10 mm
Temperature: -20 °C - 80 °C
Pressure: 315 bar

... The 4/2-and 4/3-way directly operated Proportional directional valves, Spool with electrical position feedback. Type BFWE and BFWNE Nominal sizes DN6 and DN10 Component series 2X Maximum operating pressure 315bar Maximum flow ...

DN: 13 mm - 45 mm
Voltage: 16, 14, 12 V
Temperature: 180 °C

DN: 25 mm - 120 mm
Voltage: 220 V
Temperature: -20 °C - 120 °C

... effectively eliminate the cavitation noise generated by the main engine; 4. The intake valve integrates a relief valve, a makeup valve, a solenoid valve, and a proportional ...

DN: 0.25 in - 3 in
Voltage: 12 V - 230 V
Temperature: -10 °C - 80 °C

... CESI 03 ATEX 344 Extension No. 01/12 (other certifications e.g.EAC, INMETRO, CCOE etc. on request) VALVE CONSTRUCTION Seal material FPM, NBR Housing Red colour alloy (painted with epoxy powder) FEATURES Minimum differential ...

Pressure: 21,000,000 Pa

... The Ponar Silesia 2URES 6 is a Hydraulic cartridge solenoid valve constructed in size 6 framework and can exhibit a maximum pressure of up to 21 MPa with flow rate of up to 40 dm3/min. This valve ...

DN: 0.8 mm - 2 mm
Voltage: 12 V - 230 V
Temperature: -10 °C - 80 °C

... 50ºC Materials in contact with media Main Valve: Aluminium, Stainless Steel AISI 316, Brass Solenoid Operator Stainless Steel AISI 300 & 400 series, Brass Seals: NBR, FPM (Viton®), EPDM Media Air, water, oil Coil ...

DN: 12 mm
Temperature: -10 °C - 80 °C
Pressure: 16 bar

... NC DIFFERENTIAL PRESSURE SOLENOID VALVE Differential pressure solenoid valves Applications : Air, water, inert gas, oil and other gases/liquids compatible with the ...

DN: 1 mm - 2.3 mm
Temperature: -10 °C - 140 °C
Pressure: 40 bar

... Connections:M5 Body Material:Brass Valve functioning:2 Way Direct Acting Valve type:General Purpose Solenoid Valves ...

... Acting Midget Solenoid Valves 2 way and 3 way direct acting solenoid valves are generally used for operating mini cylinders or for giving the pilot signal or for remote control of ...

DN: 1 mm - 5.2 mm
Voltage: 12 V - 230 V
Temperature: -10 °C - 180 °C

... Machines Air and Regriferation Compressors Plastic moulds temperature control Vacuum Indutrial Oxygen Steam generators Ammonia Fuel management ...

DN: 0.25 in - 2 in
Voltage: 220 V
Temperature: -10 °C - 150 °C

... PROVAL S100 Series general purpose solenoid valves are used in water, air, oils and other industrial applications limited with the diaphragm material and pressure range. Viton (FKM) diaphragms allows ...

Pressure: 0 bar - 40 bar

... threads G 3/8 - G 3/4, FK flanges PN 40 function NC pressure range 0-40 bar Kv value m³/h 4,8 media liquid fuels - fuel oil EL, M, S and oils, not acc. to DIN 51603, e.g. animal fat flow direction ...

Voltage: 12 V - 220 V

... OPERATION 2/2-ways. Direct acting. Normal position port 1-2 closed. When the coil is energized, 1 - 2 opens. Valve closes by spring return. MATERIAL Body: Brass, stainless steel Internal parts: Stainless steel Sealing: FKM (seat-0: 1,5-5 ...

... STBL Two-way Small Proportional Solenoid Valve Oriifce: 1.0-4.0mm Working medium: water, air, water vapor, oil, natural gas Removable maintenance Seals: NBR, Viton, EPDM... Chatacteristic: Working ...

DN: 1.2, 1.5, 2, 2.5, 3.1 mm
Voltage: 12, 24, 110, 220 V
Temperature: -10 °C - 140 °C

... Solenoid valves for industrial applications - W Series The W series solenoid valves, offered by SENGA, are recommended for use in the industrial and pneumatic sectors. These solenoid ...

DN: 10 mm
Voltage: 12 V - 230 V
Temperature: -10 °C - 80 °C

... electromagnetic valves are operating on digital principle. Because of this they have two states – when to the electromagnet (coil) is supplied electrical signal and when the valves are in idle state (no ...

Temperature: -30 °C - 65 °C
Pressure: 0 bar - 350 bar

... 3/2-way solenoid seat valve Screw-in cartridge valve: direkt acting; flow at port 1 is blocked in de- energized position; allows flow from 2 -> 3; In the energized position flow is allo- wed between ...