- Machine-tools >
- Cutting Tool >
- Roughing milling cutter
Roughing milling cutters
Processing Steps: Roughing, Finishing Clamping Method: Upper Pressure Type Milling Materials: High Hardness Cast Iron/Cast Steel, Gray Cast Iron, Hardened Steel, etc LEADING POSITION We're in ...
... reliable processing equipment, cutter runout is controlled within 0.05mm so that a stable cutting result, long working life and higher cutting speed is achieved. 4. As for the side ...
This device is designed with four cutting edges and a flat head, positioned at an angle of 90°. It is composed of a single shank, in compliance to the standards of DIN 6535 HB, and milling cutters ...
SAU TOOL S.p.A.
Diameter : 1 mm - 12 mm
Length: 38 mm - 73 mm
Roughing Endmill fine profile SC E2 + EZI-ALPHA - 21525A-1 We offer a wide range of precision tools in the field of micro machining. Standard or special, our micro-mill bits have the latest technological developments: ...
Eskenazi
Diameter : 1 mm - 12 mm
Length: 38 mm - 73 mm
Roughing Endmill fine profile SC E2 + EZI-ALPHA - 21525A-1.5 We offer a wide range of precision tools in the field of micro machining. Standard or special, our micro-mill bits have the latest technological developments: ...
Eskenazi
Diameter : 1 mm - 12 mm
Length: 38 mm - 73 mm
Roughing Endmill fine profile SC E2 + EZI-ALPHA - 22525A-12 We offer a wide range of precision tools in the field of micro machining. Standard or special, our micro-mill bits have the latest technological developments: ...
Eskenazi
Diameter : 4.75 mm - 19.05 mm
... for use on drill presses, jig boring machines, milling machines, tool or turret lathes, horizontal boring machines, CNC machines, and special purpose machines. Features: In-bore pilot supports cutter ...
Diameter : 1 mm - 12 mm
Length: 50 mm - 110 mm
... ball End Mill for machining high-hardness steel has been improved by applying TH3 coating. Achieves even longer tool life when machining high-hardness steel. Added 5DC type with lower neck length. Achieves ...
MOLDINO Tool Engineering Europe GmbH
Diameter : 1 mm - 12 mm
Length: 45 mm - 105 mm
END MILL, full radius, CVD-diamond-tipped – for milling aluminium alloys, graphite and plastics reinforced with abrasive fillers, such a CFRP and GFR.
Paul Horn
Diameter : 5 mm - 32 mm
Length: 0.39 mm - 1.45 mm
Modular milling & drilling system. Index in seconds with +/-.0005 repeatability. Interchangeable carbide tips & indexable heads = versatility. Change tips on the machine to minimize set-up time. +/-.0005 repeatability ...
Ingersoll Cutting Tools
Diameter : 40 mm - 160 mm
Length: 63, 50, 40 mm
... face milling cutter PFK88-SN is the milling system for rough milling when it comes to high removal rates, even in rough operating conditions. Characteristics Entering ...
CERAMTEC
Diameter : 2 mm - 25 mm
Length: 50 mm - 121 mm
... iron, and high temperature alloys. HARVI™ I TE solid carbide end mills cover a variety of operations, including dynamic milling, and extreme ramping operations. HARVI™ I TE solid carbide end mills stand for maximum ...
Kennametal
R-Cutter is an ultra-high feed radius chamfer mill capable of front and back chamfering. It has a unique insert geometry offers excellent sharpness and its high rake angle reduces cutting resistance and ...
Diameter : 16 mm - 160 mm
... family of cutters which carries triangular inserts with 3 helical cutting edges. Features Triangular insert with 3 cutting edges Economical high positive 90° shoulder Ramping down ...
ISCAR Tools
Diameter : 6 mm - 25 mm
Length: 54 mm - 121 mm
The Z-Carb HPR Five Flute Roughing End Mills are ideal for achieving high metal removal rates (MRR) and a finish of 80 RMS or better on most materials. The specialized five flute design is engineered for increased productivity ...
KYOCERA SGS Precision Tools
Diameter : 10 mm - 40 mm
Cutter range 10-40 mm (0.375-1.500 inch) Max depth of cut 5 mm (0.197 inch) Recommended slotting depth of cut 3 mm (0.118 inch) Insert corner radii range 0.2-1.6 mm (0.008-0.063 inch)
SECO TOOLS
Diameter : 100 mm
... the cutter's unique cutting edges and design optimizes surface roughness while machining depths of cut of under 0.5 mm and reduces set-up time. The double-sided 4 corner 4WHU insert’s ...
TAEGU TEC España
Diameter : 32 mm - 63 mm
Length: 50, 180 mm
The MTIX shoulder milling cutter is suitable for aerospace structure parts and enables a wide application range thanks to its large ramping angle. Cutter body as shank and shell type ...
Sumitomo Electric Hartmetall GmbH
... suitable for die mould machining the WBMR replaceable insert ball nose endmill efficiently roughs complex profiles. Its high feed rate capabilitry is a direct result of a sharp cutting edge which is maintained ...
Diameter : 35 mm - 125 mm
Length: 42, 52 mm
... axial rake angle allow extremely easy cutting when using these new Milling Cutters. Using a cutting depth of < 2,2 mm ail cutting edges of these Octagonal ...
POKOLM Frästechnik GmbH & Co. KG
... corresponding coating. Trochoidal milling is a very dynamic machining process, which manages an extremely high material removal rate when roughing to quickly mill a part that is close ...
MAPAL
Diameter : 70, 66 mm
Milling / polishing heads with diamond cutters for the processing in CNC milling machines of glossy and transparent plastics as well as for light metals and composites. EURACRYL ST ...
EURACRYL GmbH
Diameter : 50 mm - 250 mm
Length: 40, 50, 63 mm
90° corner milling cutter for Cast Iron machining Efficient and economical cutter for roughing and finishing Depth of cut up to 10 mm Extreme strong ...
MITSUBISHI MATERIALS
SAACKE manufactures Blade-Root Cutters and Groove Cutters. As bore- or shank type. With or without internal cooling.
SMB120 is a CBN micro ball end mill manufactured by NS. This tool is designed with a machining capability that uses high-accuracy technology. This micro ball end mill are available in standardized sizes from R0.01. Its ...
Diameter : 0.38 mm - 1,000 mm
Length: 0.5 in - 1.25 in
Rotational speed: 15,000 rpm - 30,000 rpm
... a 2 flute tool, with field tested, patented geometries designed specifically for the newest generation of hyper-velocity machining centers. We have produced an exceptionally well-balanced tool with superior chip flow. ...
Data Flute CNC
Diameter : 160 mm - 250 mm
CEL disc milling cutter with adaptor holder design can flexibly exchange different cutter thickness and outer diameter. It is not necessary to purchase another cutter ...
YIH TROUN CUTTING TOOLS GMBH
Diameter : 8 mm - 25 mm
Length: 63 mm - 120 mm
High performance roughing end mills Helix 45° Similar to DIN 6527-L
Cerin s.p.a.
Your suggestions for improvement:
Receive updates on this section every two weeks.
Please refer to our Privacy Policy for details on how DirectIndustry processes your personal data.
- Brand list
- Manufacturer account
- Buyer account
- Our services
- Newsletter subscription
- About VirtualExpo Group
Please specify:
Help us improve:
remaining