Safety I/O modules

Safe AS-i modules for field applications and control cabinets Integration of safety-related components in AS-i Connection of safe mechanical contacts and safe three-wire sensors Three freely selectable directions of the ...

Safety and standard components in one network For connecting mechanical contacts such as safe contact elements For connecting inductive sensors Safe modules with two safe inputs Safe modules with two safe inputs and two ...

Flexi loop is an economical solution to meet the need for safe switches and sensors within a machine that also supports transfer of detailed diagnostic information. Keeping the highest level of safety consistent, this system can cascade ...

Safety in the system does not begin with the drives first, but at the control level. With the expansion of the controller software to include the Safety Controller c250-S a complete automation solution is provided for safety engineering ...

For safety-related applications, we offer IP67 block I/O modules with safe digital inputs and universal digital channels that can be used as inputs or outputs. The modules also feature non-secure universal digital channels and IO-Link ...

The Safety Hub links automation and safety technology for the first time via IO-Link. This new I/O module is merely linked to the IO-Link Master. Because the system is open toward the system level, you can connect nearly any safety device. By ...

I/O modules PSS67 for the automation system PSS 4000 Compact modules with IP67 protection are now available, the PSS67 IO1 16FDI with SafetyNET p. Thanks to the fully encapsulated module electronics, the IP67 modules are particularly ...

Combine freely for your application A selection of I/O modules for safety-related and non-safety-related digital signal processing is available for the remote I/O system PSSuniversal 2. You can configure the system to fit your requirements, ...

For cabinet-free installation with IP67 With the PDP67 modules Pilz offers solutions for decentralised applications directly in the field. Thanks to protection type IP67 the modules are resistant to dirt and water. The decentralised ...

Rockwell Automation announced as of June 2018, the 1753 GuardPLC Safety I/O will be discontinued. Some of these products are no longer available for sale. Customers are encouraged to make last-time buy orders for any of the products that ...

Cost-optimized CANopen-slave-I/O module for the extension of the inputs/outputs of a master control unit via CAN. The communication of the master control unit takes place via CANopen or a layer 2 protocol. The ESX-IOX fulfils the safety ...

Kuhnke’s FIO Safety PLC is a module intended to expand EtherCAT networks. Acting as the FSoE master, it is able to address any FSoE slave including safety I/Os, motion controllers, valve islands and other FSoE equipment. The Safety PLC ...

Kuhnke’s FIO Safety SDI4/SDO2 is a safety I/O terminal featuring four safe digital input channels and two safe digital output channels. This expansion module from Kuhnke’s FIO range easily integrates in any EtherCAT® network. Four inputs ...

Order No.:108106 Type:0942 UEM 612 Description:4 DO - SAFETY: LioN-Link I/O module with 4 digital outputs (2 A), M12 sockets (4x), 5 poles, M12 actuator supply, one channel per socket, suitable for safety critical applications within ...

MO 690.HCX FET Extension Module High output current capability Smart high-side switches with overcurrent / overtemperature and short circuit protection Intergrated free-wheeling diode for inductive loads Reduces EMI and length of ...

The module MU110-24.1TD is a 1-channel input module for resistor bridges (strain gauge). The module enables the direct connection of a resistor measurement bridge. The module requires 24 V DC power supply and supports Modbus RTU/ASCII ...

The DAT 3011 device is specially designed to acquire RTD or Tc sensors, mV, V or mA input signals connected to the universal analog input. It is also capable acquire up to 3 digital inputs and to drive one solid-state relay and two SPST ...

The device DAT10130 is able to acquire up to 8 digital inputs with connection NPN or PNP and to drive up to 4 relay outputs of which 2 format SPDT and 2 in format SPST. The data are transmitted with MODBUS RTU / MODBUS ASCII protocol ...

The device DAT10188 is able to acquire up to 8 digital inputs with connection NPN or PNP and to drive up to 8 digital outputs type PNP transistor. The data are transmitted with MODBUS RTU / MODBUS ASCII protocol over the RS-485 network. To ...

The safety-input bus terminal is a digital input terminal for sensors with potential-free contacts for 24 V DC. This module has four fail-safe inputs and meets the requirements of IEC 61508 SIL 3 and EN 954 Cat. 4. The safety-output ...

AC500-S Safety PLC - S500 I/O Modules All S500 I/O modules comply to SIL3 (IEC 61508, IEC 62061, IEC 61511) and PL e (ISO 13849-1) functional safety standards. These modules can be used centrally as well as in the remote rack via PROFINET ...

8 safety inputs, 8 test pulse outputs Monitoring of the connected sensor system Fast safety response due to integrated fast shut-off function Diagnosis LEDs The digital input/output modules are used as a signal connection for the ...

The safety-related F1 DI 16 01 remote I/O is a compact system in a metal enclosure with 16 digital inputs and 4 pulsed outputs. The remote I/O is available in two model variants for SILworX and two model variants for ELOP II Factory. ...

Rockwell Automation announces that as of June 2018, the 1753 GuardPLC™ Safety I/O will be discontinued and no longer available for sale. Additional Information Rockwell Automation announces that as of June 2018, the 1753 GuardPLC Safety ...

What makes the "E°UBM" type series so impressive is its enormous power density, multitude of modules, and simple manageability. With a width of only 11.5 mm per module, it saves space in control cabinets and, despite its very compact ...

Description The Remote I/O Module ANTARES 8DI-N is operated and supplied with power by means of the Rail Control unit (RCU) ANTARES. This module is suitable for connecting 8 intrinsically safe binary signals in hazardous areas. NAMUR ...

Expand the capabilities of your vehicle control system with our CAN-based Input/Output modules. These stackable microcontroller add-ons integrate new control functions smoothly and effectively. You can use our I/O modules as the building ...

The real-time EtherCAT technology, widely used in machines and motion control applications. Outstanding performance, flexible topology and simple configuration characterize EtherCAT, the real-time Ethernet technology, which is the expansion ...

4AI Transceiver RAD-AI4-IFS4AI Transceiver RAD-AI4-IFS DIN rail mounted and can be combined with up to 32 io modules for the exact setup needed. The i/o module communicates with IFS modules such as the Indoor Transceiver RAD-900-IFS ...

Restrict energy and pressure of local dangerous signal and intrinsic safety output Transfer Input and output signal of V;mA;mV

Local temperature signal PT; mV; signal transfer to standard 4~20mA output Transfer Input and output signal of V;mA;mV