- Robotics - Automation - Industrial IT >
- Automation >
- Serial I/O
Serial I/O
TCG140 is a GSM-GPRS remote IO module for remote site monitoring and control over a mobile network. Quad-bands GSM connectivity; Setup via USB (Windows setup program) or SMS; 2 digital ”dry contact” inputs; 1-Wire interface for up to ...
Panel I/O – Processor and Multifunction I/O Board with 16 A/D, 2 D/A, 20 DIO, One I2C and One RS-232/422/485 Port Features Compact board level size (4.5" x 8.5" x 0.75") Compatible with over 85+ UEI I/O boards Small ...
The DNA/DNR/DNF-MF-101 are multifunction analog and digital I/O boards for use in UEI’s Cube/RACKtangle/FLATRACK I/O chassis respectively. The board offers a powerful combination of I/O including 16 single-ended/8 differential analog ...
This product is a remote I/O model CPU unit that has RS-232C *1 and LAN interfaces in addition to four expansion slots. If necessary, you can freely combine this product with CONPROSYS nano series I/O modules. In addition, this product ...
CONTEC
The G series distributed IOs provide you with supreme field and bus connectivity for smart integrated solutions through a wide range of IO modules for almost any signal type. Communicate with overlying systems or other equipment via widely ...
The MDS NETio is an integrated, scalable family of wireless solutions that provide long distance unlicensed communications, allowing users to interface both analog and digital I/O including sensors for pressure and flow as well as controls ...
The PCM-G-COM8 is an 8-channel PC/104-compatible serial module. It is well suited for embedded applications requiring a large number of serial I/O ports. Each channel supports RS-232, RS-485, and RS-422 electrical levels to interface ...
Dedicated I/O expansion modules Various models available to I/O requirements Communications via CAN with Centurion™ controller Type J or K Thermocouples or 100Ω Pt 3-wire RTD temperature measurement B+ or B- Digital inputs Low ...
-Designed specifically for Remote I/O Systems -System sizes from 2 to 15 I/O modules per CPU -Easy configuration using free software utility. -Automatic I/O module identification and scanning -No programming required but can be used ...
The Kuhnke CIO Controller is a μController based hardware for control tasks in machine and apparatus engineering. The integrated interfaces are designed for devices with power supply and complex control tasks. The programming is in C ...
Remote I/O Module Suitable for use in utility substations or industrial control and automation systems, the SEL-2515 Remote I/O Module provides an easy way to expand inputs and outputs for SEL communications processors. They are far ...
Robust CPU I/O master module with powerful 32-bit processor Controls up to 16 I/O slave modules Robust design for harsh environments (shipbuilding approvals) Integrated web server for user-friendly configuration and web-based visualisation IEC ...
NORIS Group GmbH
The IA-3088 is a Multi way Relay Controller that includes 8 Power Relays with an output rating of 10Amp @ 230VAC, 8 Digital Inputs and a Serial Communication Port. The relays may be operated by the corresponding Digital Inputs, by a predefined ...
Intelligent-Appliance
Brand: GCAN Model: GC-1008~GC-8012 Application: Input and output modules Type - Characteristic - Signal - Channel Digital input - GC-1008 - Digital input (PNP) - 24V DC - 8-channel GC-1018 - Digital input (NPN) - 24V DC - 8-channel GC-1502 ...
The electronic system “eGalvanica” allows to control, acquire and visualize the principal parameters that distinguishes a galvanic bath. The system is made up with a 7-inch TFT touch-screen display flown by an industrial PC with UI ...
Operating Temperature Range –20~70°C 8 channel analog input (0~5v or 0~20mA) , 12 bit 8-point isolated digit input 5-48 VDC(with SOE), or 8-point single channel counters up to 1 KHz 8-point relay output, 250VAC 5A per point ...
Beijing Tengcon Technology Co.,Ltd.
-8 Optically-Isolated, Non-Polarized Digital Inputs with Change-of-State Detection -8 Form C SPDT Electromechanical Relays Can Switch Up to 1 Amp Each -Relays Can be Configured for Level or Pulse Modes -Microcontroller ...
ACCES I/O Products, Inc.
Key Highlights & Features •8 I/O Module •AC Power supply •Analogue Output Module •Physical Hardware Seal •RS232/RS232 Module •RS485/RS485 Module •Stainless Steel Dust Cover The C500 Series flexibility is provided through its ...
The EMX-ESG614 provides 6 RS-232/422/485 ports based on the SMSC SCH3116 industrial temperature UART in the efficient EMX I/O form factor. Ports 1 - 4 support RS-232, RS-422, and RS-485 protocols, while ports 5 and 6 support RS-232 or ...
C Programmable Remote I/O Module Cost-Effective programmable I/O module Support lwIP and BSD socket library and tiny web server Windows configuration utility included 1 x 10/100Mbps Ethernet interface 1 x Isolation RS-485 ...
Universal, programmable I/O device server Barionet 1100 is the newest fully programmable I/O device server of Barix, based on Linux/Lede/OpenWRT. The device features a wide range of interfaces such as two USB, WiFi, serial ports, analog ...
Barix
Features DIN Rail or Panel mounted compact I/O modules Indication for Diagnostics, Power and Communication Adds I/O capability to your PLC, SCADA and Modbus networked devices Programmable inputs allow same modules to accept RTD, mA, ...
Renu Electronics Pvt. Ltd.
The SNAP-PAC-RCK4 mounts one SNAP PAC brain or on-the-rack controller and up to 4 analog, digital, serial, and special-purpose SNAP I/O modules. The SNAP-PAC-RCK4 can be DIN-rail or panel mounted. This rack works with all SNAP I/O ...
Opto 22
The PLC TPLC050 has a modular and flexible structure based on ARM9. The inputs and outputs of the TPLC050 are expandable by adding Mect MPNC030 and MPNC035 series modules for analog signals and MPNC020 for digital signals. The analog ...
Working voltage: 3.3-5vdc Operating frequency: 433±30MHz System capacity: 2 × 25 nodes Working temperature: -40~70°C Main station circuit board The front faces are 1-6 from left to right: 1—(vcc) power supply positive, ...
2 Hard wired inputs Strobe and bell connections 1 PGM The input/output board for the Enforcer control panel support an RS485 data bus, 1 PGM, strobe and bell connections and 2 hard wired inputs. When the RIX2-WE is connected ...
Your suggestions for improvement:
Receive updates on this section every two weeks.
Please refer to our Privacy Policy for details on how DirectIndustry processes your personal data.
- Brand list
- Manufacturer account
- Buyer account
- Our services
- Newsletter subscription
- About VirtualExpo Group
Please specify:
Help us improve:
remaining