This product is a remote I/O model CPU unit that has RS-232C *1 and LAN interfaces in addition to four expansion slots. If necessary, you can freely combine this product with CONPROSYS nano series I/O modules. In addition, this product can be controlled ...
... -Designed specifically for Remote I/O Systems -System sizes from 2 to 15 I/O modules per CPU -Easy configuration using free software utility. -Automatic I/O module identification and scanning -No programming required but can be used for local control -Built ...
... CEDIO-P 24/24/2 With 48 digital I/O and 2 analog outputs on board it is the controller with highest I/O packing density. ...
... The “TES” modules are Slave Modbus Remote Output Terminals on a RS485 network. Their implementation is very fast with the TESIS workbench. Numerous internal functions are pre-programmed, The Modbus communication mapping is predefined. Designed ...
LEROY AUTOMATION
... Overview
The Creasol DomBus21 is a low‑consumption latching relay module for automated control of loads and monitoring. It provides three SPST latching relays, one optoisolated AC input for voltage presence/zero‑cross detection and four configurable ...
Creasol
... Product Code: RS485-RS232 Safe Load Controller Ray Tipi-RS485-RS232-220 W-Input-2 Role ...
... Key Highlights & Features •8 I/O Module •AC Power supply •Analogue Output Module •Physical Hardware Seal •RS232/RS232 Module •RS485/RS485 Module •Stainless Steel Dust Cover The C500 Series flexibility is provided through its broad range of modules ...
IMO's remote Input and Output modules, commonly referred to as Remote-I/O, is a selection of serial, CAN and Ethernet 24VDC powered remote modules. Available as digital and analogue input and output, thermocouple, and resistance temperature detector (RTDs) ...
IMO Precision Controls Limited
... C Programmable Remote I/O Module Cost-Effective programmable I/O module Support lwIP and BSD socket library and tiny web server Windows configuration utility included 1 x 10/100Mbps Ethernet interface 1 x Isolation RS-485 port, 1 Serial Console ...
The IA-3088 is a Multi way Relay Controller that includes 8 Power Relays with an output rating of 10Amp @ 230VAC, 8 Digital Inputs and a Serial Communication Port. The relays may be operated by the corresponding Digital Inputs, by a predefined internal ...
Intelligent-Appliance
ZLAN6042 Remote IO Controller is an intelligent device developed by Shanghai ZLAN of digital input output and analog quantity input based on Ethernet or RS485. The remote IO controller can conveniently connect to Ethernet and 485 bus to realize accessing ...
Shanghai ZLAN Information Technology Co.,Ltd
... Brand: GCAN Model: GC-1008~GC-8012 Application: Input and output modules Type - Characteristic - Signal - Channel Digital input - GC-1008 - Digital input (PNP) - 24V DC - 8-channel GC-1018 - Digital input (NPN) - 24V DC - 8-channel GC-1502 - ...
... The electronic system “eGalvanica” allows to control, acquire and visualize the principal parameters that distinguishes a galvanic bath. The system is made up with a 7-inch TFT touch-screen display flown by an industrial PC with UI and supervision ...
... Operating Temperature Range –20~70°C 8 channel analog input (0~5v or 0~20mA) , 12 bit 8-point isolated digit input 5-48 VDC(with SOE), or 8-point single channel counters up to 1 KHz 8-point relay output, 250VAC 5A per point or 30VDC 5A per ...
Beijing Tengcon Technology Co.,Ltd.
... -8 Optically-Isolated, Non-Polarized Digital Inputs with Change-of-State Detection -8 Form C SPDT Electromechanical Relays Can Switch Up to 1 Amp Each -Relays Can be Configured for Level or Pulse Modes -Microcontroller with SRAM and ...
ACCES I/O Products, Inc.
... 8 digital inputs / 8 digital outputs DESCRIPTION : These modules are used with HMI, PLC or SCADA via Modbus RTU protocol. IO Studio is its PC software for setting communication. Data Acquisition Studio is its PC software for DAQ purpose. As a professional ...
BRAINCHILD ELECTRONIC CO., LTD
... Universal, programmable I/O device server Barionet 1100 is the newest fully programmable I/O device server of Barix, based on Linux/Lede/OpenWRT. The device features a wide range of interfaces such as two USB, WiFi, serial ports, analog and digital I/Os, ...
Barix
... Product overview
High connectivity, openness and configurability. The new generation of ESA I/Os is engineered to promote efficiency and digitization in accordance with Industry 4.0 and IoT. The ideal solution for distributed control of device ...
... The PE16S represents a new level of performance and capabilities for PXI-based digital instrumentation. Based on the proven architecture of the PE16, the PE16S offers high performance pin electronics and an enhanced timing generator in a compact, 3U ...
OpenATE Inc.
The IOM-CH16 Digital I/O Module can acquire the status of 16-channel digital inputs, or 8-channel digital inputs and 4-channel relay outputs, or 12-channel high-voltage digital inputs, or 8-channel relay outputs. It also supports remote data acquisition ...
... The GRV-OVMALC-8 analog output module has 8 channels, individually configurable for any one of seven voltage or current output ranges: 0 to 5 VDC 0 to 10 VDC -5 to +5 VDC -10 to +10 VDC 0 to 22 mA 4 to 20 mA 0 to ...
Opto 22
The BACnet I/O modules allow digital and analogue input values to be connected using the BACnet communication protocol. MS/TP (Master/Slave Token-Passing) based on the RS485 standard is used here. This allows a total bus length of 1,200m per segment with ...
MBS GmbH
The APM series modules provides easy installation and maintenance efficiency for monitoring process signals, such as temperature, voltage and current. With the ability to connect up to 31 modules, the APM Series features both standar RS-485 Modbus RTU, ...
ADTEK Electronics Co., Ltd
FD-16M Modbus Modular I / O module has designed from a different perspective to automation systems. The FD-16M hardware modular design allows you to solve both your systems in a cost-effective way and to design them in such a way that there are no spare ...
Analog Input Module Data of analog sensors with 0-10V and 4-20 mA output can be read via RS-485 line with Modbus RTU communication.
... Measuring input for Standard Signals, Modbus RTU Input for Standard Signals 0-20 mA, 4-20 mA, 0-10 V, 0-5 V In-Rail-Bus Connector for Modbus and power supply Protective Separation up to 300 V AC/DC, test voltage 3 kV ...
MCM260Xs are data acquisition modules. The complete series includes six different combinations of free-programmable analog and digital I/Os. Originally conceived as data acquisition/actuation modules for Pixsys PLCs (programmable logic controllers) and ...
Pixsys
... The PLC TPLC050 has a modular and flexible structure based on ARM9. The inputs and outputs of the TPLC050 are expandable by adding Mect MPNC030 and MPNC035 series modules for analog signals and MPNC020 for digital signals. The analog and digital I/O ...
... Highlights • - Industrial Quality Bluetooth Solid State Relay Controller • - Available with 1, 2, 4, or 8 On-Board Relays • - Available with 20-Amp SPDT or 30-Amp SPST Relays • - ProXR Command Set Used by Industry for Many Years • - Supports Windows, ...
... Panel I/O – Processor and Multifunction I/O Board with 16 A/D, 2 D/A, 20 DIO, One I2C and One RS-232/422/485 Port Features Compact board level size (4.5" x 8.5" x 0.75") Compatible with over 85+ UEI I/O boards Small enough to be mounted ...
UEI - United Electronic Industries
To expand the I/O capability of certain RTCU products an MODBUS compatible I/O module can be connected to the product and configured using the I/O Expansion configuration functionality available in the RTCU IDE. The I/O Expansion is completely transparent ...
LOGICIO
... Basis-module for several fieldbus systems Connectable to RS232, RS485, Profibus DP via exchangeable plug-in card 8 inputs, 8 outputs Transistor or relay outputs ...
... I/O acquisition modules with 4 inputs / outputs: NXT-A4 Remote I/O acquisition modules compatible with ModBus RTU (RS485) and ModBus TCP (Ethernet) protocols. Versatile IO analog module equipped with ModBus and CANBus NXT-A4 is an IO analog module ...
4neXt
... • Supports Class A and Class B connections • Supports Built-in Isolator • Ensures a reliable and logic data transmission via Ring and Bus topologies. • Uses RS485 serial communication and data transmission speed is • 230.400bps • Same level of accessibility ...
The AMRIO series input/output extension modules are used to easily extend I/O signals of control systems. Modules from this series feature both ARION and MODBUS RTU communication protocols – the selection of the required protocol is done with a flip of ...
AMiT, spol. s r.o.
... Power Supply - 24 VDC Permissible Range - 20.4 - 27.6 VDC Power Consumption - 3W Dijital Inputs Nominal Input Voltage - 24 VDC Input Voltage - For Logic 0 - For Logic 1 10 VDC Input Current - 6mA max. Input Impedance - 5.9 kohm Response ...
EMKO Elektronik
... Multi-Function I/O Module ● 4 Channels Analog input ● 2 Channels Analog output ● 4 Channels Digital input ● 4 Channels Digital output ● All Digital input channels can be used as 32 bit counters ● Support over voltage protection ● Support standard ...
Protech Systems
... • supply voltage 24V= • 4 outputs SPNO 230V-= max. 5A or transistor (PNP) 24V= max. 800mA or photomos max. 2A • LED indicators for inputs and outputs • 1 potentiometer supply voltage 24V= ±10% power consumption 0,5W nominal output relay ...
HIQUEL
The KET-DDX-410, designed for the realisation of control systems used in building automation, is an I/O module with 4 digital inputs for dry contact (max 30 Hz) and 4 digital SPDT relay outputs type NC C NO with capacity 12 A @ 250 VAC, 12 A @ 24 VDC ...
... The DC-IO## control module has been designed to operate the 125-230Vac or 12-24Vdc outputs and digital inputs through a RS485 communication port. VERSIONS: DC IO- 8 - 4 relays and 4 digital inputs per module. DC IO- 12 - 8 relays and 4 digital inputs ...
Data-Control PC
the best suppliers