Silicone oils

Klüberbeta DB 7-68 Synthetic oil for sintered metal plain bearings Product description Klüberbeta DB 7-68 is a silicone oil based product for sintered metal plain bearings subject ...

Operating temperature: 150 °C - 200 °C

Klüberbeta H 7- 500 Silicone oils for high-temperature applications Product description These methyl silicone oils of brownish colour offer excellent thermal stability ...

Viscosity: 0.000004 m²/s
Operating temperature: 20, 40 °C

... the cleaning effort considerably when using Klüberplus C2 PM2 Ultra Dry due to less residue formation. Klüberplus C2 PM2 Ultra Dry can be easily removed from the belt unlike silicone ...

Operating temperature: -20 °C - 390 °C

The MOLYKOTE® 314 SILICONE LUBRICANT is utilized along with fabric to fascilitate cutting and fabric flow. It comes with a maximum service temperature rate of 390 °C and a minimum service temperature rate of -20 °C. It ...

Operating temperature: -50 °C - 200 °C

Silicone oil for incidental contact with foodstuffsApproved by NSF on the requirements of the FDA, in category H1; registration 138343. Antistatic, guaranteed free of chlorine solvents. Waterproof. Good ...

Operating temperature: 0 °C - 90 °C

gear oil Additional Information H1 gear oil for the food and pharmaceutical industry Use Typical applications: gears, rolling and plain bearings under high loads, circulating systems, ...

Operating temperature: -40 °C - 70 °C

... long-term corrosion protection Extremely water repellent Markings remain visible Resistant to seawater Silicone-free Compatible with metals and solvent resistant materials Economical in consumption Temperature ...

Operating temperature: -30 °C - 80 °C

... No removal from injection moulding tools necessary Extremely water repellent Compatible with lubricants Silicone-free Economical in consumption Temperature range: - 30°C - + 80°C Shipping ...

Operating temperature: -40 °C - 200 °C

Contact oil for switch applications Non-flammable and silicone free Excellent electrical properties Reduces arcng and hence contact wear

Viscosity: 0.0002 m²/s

Electrolube's Silicone Oil Aerosol is a high quality multi-purpose mechanical lubricant. The Silicone Oil Aerosol is 100% Ozone Friendly. Key Properties: High ...

Operating temperature: -50 °C - 200 °C

Silicone Oil, 100 cSt OKS 1010/1 is a silicone oil, highly suited as lubricant and parting agent for plastics and elastomers. Areas of application Parting agent ...

Operating temperature: -50 °C - 200 °C

Silicone Oil, 1000 cSt OKS 1010/2 is a silicone oil, highly suited as lubricant and parting agent for plastics and elastomers. Areas of application Parting agent ...

Viscosity: 2 m²/s
Operating temperature: -50 °C - 200 °C

Silicone Oil, 2000 cSt OKS 1020/2 is a silicone oil, highly suited as lubricant and parting agent for plastics and elastomers. Areas of application Parting agent ...

Operating temperature: -10 °C - 140 °C

... displaces moisture. - reducing noise. - protection against wear. - temperature resistant from -5°C to +140°C. - silicone-free.

Fluid oil, not soluble, intended for cutting and impregnation of induction nuclei, contactors, circuit breakers and other similar devices SUPRACO ELECTRIC 40 A is a smooth oil, which has a low freezing ...

Operating temperature: -40 °C - 300 °C

Operating temperature: -51 °C - 149 °C

Features Does not contain silicone Safe to use on most surfaces Flash point of 175°F (79°C) Penetrates and protects metal against rust and corrosion Ideal for both regular and extreme conditions ...

This spray is perfect to lubricate different types of machinery: bottling machinery, packaging machinery and utensils as cutters, knifes and saws. It protects and it isolates equipment under humidity.

Operating temperature: -20 °C - 150 °C

Thin silicon oil, suitable for applications where attachment between various substances is to be avoided, and sliding is required. Benefits Good thermal stability. Insulating properties. Very low ...

Operating temperature: -40 °F - 400 °F

05074 -- Heavy Duty Silicone™ Lubricant, 7.5 Wt Oz : Lubricates and eliminates squeaking and binding caused by friction. Film is clean, odorless, and highly resistant to water. Use on nylon, rubber, metal & non-metal surfaces.

SILICONES 800 is a multi-purpose product almost non greasy that may be used as a release agent. It can also be used each time a clean lubrication is needed. It is colorless, odorless and stops from sticking. It may be ...

We supply FT704, FT702, and FT705 silicone fluids which are the functionally equivalents to the discontinued DC704 and Dow Corning fluids. Our silicones oils are drop in replacements ...

Supersaw (formerly EP5000) High Oil EP Coolant Supersaw is a micro-emulsion, biocide protected, water soluble cutting fluid. It forms a very stable emulsion, even with hard water, and incorporates extreme ...

Viscosity: 0.0001, 0.001, 0.003, 0.005 m²/s
Operating temperature: 25 °C

... Divinyl-terminated methyl phenyl silicone oil, Poly(phenylmenthylsiloxane),divinyl terminated Item: IOTA252 Description: Divinyl terminated menthyl phenyl siloxane is Vinyl-terminated linear phenyl ...