Single-acting valves

Single-acting cylinders Application – Single-acting cylinders. Actuation – Flipper lever operated. Functions – Cylinder piston “advance”, “hold” and “retract”. ...

DN: 0.25 in
Temperature: -20 °C - 70 °C

Dependable safety valve to retain a set supply air pressure and guarantee a steady process control when a supply air is suddenly failed by accident and its pressure becomes lower than a set pressure Features - Rugged ...

DN: 0.375 in - 2.5 in
Pressure: -0.9 bar - 16 bar
Temperature: -20 °C - 80 °C

FARBO, ever following the best performances, renews a new pneumatic globe valves series. Cheaper and compact, they allow to reduce encumbrances and costs. Available with brass body, as standard they are supplied with ...

DN: 15 mm - 50 mm
Pressure: 0 bar - 13 bar
Temperature: -10 °C - 180 °C

Functioning Body material Stainless Steel CF8M (Aisi 316) ACTUATOR Stainless Steel CF8 (Aisi 304) Pipe Size G1/2” – G3/4″ – G1″ – G1 1/4″ – G1 1/2″ – G2″ SEAL PTFE PIPE SIZE ACTUATOR G1/8″ Options 3/2 Command Pilot Visual Positioning ...

Pressure: 17, 20 bar
Temperature: 210, 220 °C

The GD-30 and GD-30S are compact, high-performance direct-acting valves. Economical to buy and use, it is ideal for those low- to moderate-flow applications where accuracy of +/- 10% is acceptable. The ...

DN: 0.5 in - 48 in
Pressure: 600 psi - 15,000 psi

Pressure balance lubricated plug valves are metal seated valves providing a tight shut off ( 0 leakage ) sealing, valves shall be regularly lubricated along with their operation by injection ...

DN: 15 mm - 150 mm
Pressure: 16 bar

... flow operation. Actuator can be double acting and single-acting spring return type, also can driven intelligent positioner through the external input signal to control the pneumatic ...

DN: 15 mm - 100 mm
Pressure: 16 bar
Temperature: 0 °C - 60 °C

... threaded sockets (BSP or NPT), HDPE sockets or flanged Valve body designed to be actuated Floating full bore ball locked in place on both sides. Fully round ball smoothed by special turning ...

DN: 15 mm - 50 mm
Pressure: 10 bar
Temperature: 98, 65 °C

... stainless fixed nut · Actuator: Single-acting, Spring automatic return, normally closed · Open and close time: 1-2s · It can be used in high corrosive environment as it is all plastic material · ...

DN: 13 mm - 45 mm
Pressure: 0 bar - 16 bar
Temperature: -10 °C - 180 °C

... SERIES Angle seat valves - stainless steel In its single acting version, the valve is normally closed (or opened) by spring force. When the piston is moved by the ...

DN: 0.5 in - 36 in

... side-entry ball valve is the most common and popular design. Given its great modularity, SRi can manufacture any side-entry ball valves with special options. In case of maintenance operation, all ...

DN: 40 mm - 900 mm

MODULATING ALTITUDE VALVE- Single acting. Same construction as Model C000/CF000. Level control with modulation for final filling of storage tanks. CONSULT FACTORY for control valve ...

DN: 0.25 in - 0.75 in
Pressure: 210 bar
Temperature: -20 °C - 100 °C

Single-acting flow control valves available from 1/4" to 3/4" bsp, max. working pressure 210 Bar, adjustable oil flow rate from 1 to 80 Lt/min. (depending on the size)

DN: 50 mm - 300 mm
Pressure: 7, 8, 10 bar

Design Center body consists of 1 part to be mounted between two flanges according to EN 1092-1 type 11 form B – PN10 (former DIN 2501). ANSI 150 on request. Media Liquid and pulverised media with fibre particles, viscous media, ...

DN: 40 mm - 300 mm
Temperature: -20 °C - 90 °C

... NBR -20°C / + 90°C. • MAXIMUM WORKING PRESSURE W/ACTUATOR: Please refer to manual valve. For general applications and special executions, see the manual valve.

Pressure: 500 bar
Flow rate: 301 l/min

... identical at sequence valves. This is what makes this valve type ideal for use in sequence controls. Single-acting cylinders only require one feed line from the pressure ...

Pressure: 20 bar - 70 bar
Temperature: 0 °C - 70 °C