ANSI valves

DN: 15 mm - 250 mm
Pressure: 10 bar - 100 bar
Temperature: -60 °C - 350 °C

The sliding gate control valve type 8021 in reinforced GS3 design with integrated positioner is suitable for a wide range of process applications. Media such as steam, liquids, gases, etc. can perfectly be handled. ...

DN: 25 mm - 300 mm
Pressure: 10 bar - 40 bar
Temperature: -40 °C - 220 °C

... capacity. Size: DN 25 - DN 300 Pressure: DN25 - DN50: PN40, ANSI#300, ANSI#150 DN65 - DN100: PN25, ANSI#150 DN125 - DN300: PN16, ANSI#150 ...

DN: 15 mm - 150 mm
Pressure: 0 bar - 40 bar
Temperature: -60 °C - 350 °C

... control valve type 8020 with NAMUR interface for universal positioner assembly is suitable for a wide range of process applications. Media such as steam, liquids, gases, etc. are easy to handle. For high speed and cycling ...

DN: 13 mm - 65 mm
Pressure: -0.9 bar - 30 bar
Temperature: -60 °C - 200 °C

... architecture means valve bodies and actuators can be freely combined. The modular product concept makes it easier to modify and maintain systems without having to remove the entire valve. • Robust ...

DN: 25 mm - 300 mm
Pressure: 2 bar - 8 bar

... quarter turn actuator and valve positioner - For on/off applications with pilot valve and/or limit switch box as an option - Butterfly valve type: wafer or lug - Nominal width DN25 ...

DN: 0.5 in - 4 in
Pressure: 16 bar
Flow rate: 4 m³/h - 436 m³/h

- Long welded ends to ASMEBPE, ISO 1127 - Clamp ferrule to ASME-BPE, DIN 32676-B - Electropolished surfaces SFV4 (Ra 15 µinch, corresponds to Ra 0.4 µm) - PTFE seal with minimal dead space (PTFE cavity fillers) - FDA-compliant ...

DN: 90 mm
Pressure: 4 bar - 8 bar
Temperature: -20 °C - 80 °C

... well as check valves for hydrogen refueling systems and generally for use in hydrogen applications. Hydrogen Valves All Valves for Hydrogen refuelling applications are optimized for ...

DN: 155 mm
Pressure: 2 bar - 10 bar
Temperature: -73 °C - 80 °C

Maximator offers various compressed air operated valves (1/4" to 1") as well as check valves for hydrogen refueling systems and generally for use in hydrogen applications. Hydrogen Valves All ...

Maximator offers various compressed air operated valves (1/4" to 1") as well as check valves for hydrogen refueling systems and generally for use in hydrogen applications. Hydrogen Valves All ...

DN: 6 mm - 200 mm
Pressure: 0 bar - 16 bar
Temperature: -20 °C - 160 °C

... in contact with the fluid handled only: body and diaphragm ● Body designs: 2-way valve body, T-pattern, tank or multi-port valves ● Butt weld ends or clamped connection ● Drain angle indicated by ...

DN: 6 mm - 200 mm
Pressure: 16 bar
Temperature: -20 °C - 160 °C

... in contact with the fluid handled only: body and diaphragm ● Body designs: 2-way valve body, T-pattern, Y-pattern, tank or multi-port valves ● Butt weld ends or clamped connection ● Drain angle ...

DN: 40 mm - 300 mm
Pressure: 6 bar - 16 bar
Temperature: 0 °C - 100 °C

... dimensions of the valve in accordance with standard ISO 5752 (DN 40÷200 Medium Series 25, DN 250÷ 300 Long Series 16) and DIN 3202 K2 and ISO 5752 (DN 65÷200 K2, DN 250÷300 K3) • Can also be installed as an end line valve, ...

DN: 6 mm - 80 mm
Pressure: 0 bar - 25 bar
Temperature: -10 °C - 180 °C

... GEMÜ 507 2/2-way angle seat globe valve has an ergonomically designed plastic handwheel and is manually operated. The valve spindle is sealed by a self-adjusting gland packing providing low maintenance ...

DN: 4 mm - 25 mm
Pressure: 0 bar - 8 bar
Temperature: -10 °C - 100 °C

Diaphragm valve GEMÜ 650TL is a manual tapping valve with automatic closing function which is pneumatically operated. The "keep-closed" override of manual operation is via a stainless steel handwheel. ...

DN: 15 mm - 100 mm
Pressure: 0 bar - 10 bar
Temperature: -10 °C - 80 °C

... GEMÜ R690 2/2-way diaphragm valve has a low maintenance membrane actuator and is pneumatically operated. Normally Closed (NC), Normally Open (NO) and Double Acting (DA) control functions are available. The High-Flow ...

DN: 25 mm - 400 mm
Pressure: 0 bar - 10 bar
Temperature: 220 °C

Energy saving valve for the precise and economical control at low loss of pressure of liquids and gases that can be either clean or contain particles. Applications - Air for aeration in wastewater treatment plant - ...

DN: 25 mm - 400 mm
Pressure: 0 bar - 10 bar
Temperature: 180 °C

Energy saving valve for the precise and economical control at low loss of pressure of liquids and gases that can be either clean or contain particles. For : Air for aeration in wastewater treatment plant Gases Municipal ...

DN: 10 mm - 80 mm
Pressure: 16 bar
Temperature: -10 °C - 50 °C

... the union nut Integrated bracket for fix point mounting Integrated fixations for the modular adapter set: one-piece injected valve body Cushion O-ring for PTFE-seat Double sealed shaft Locking handle with integrated PLS ...

DN: 10 mm - 50 mm
Pressure: 16 bar
Temperature: 0 °C - 80 °C

Radial installation or removal Safety locking handle system Double sided blocked ball Full sectional area of flow Seal materials - EPDM, FPM Ball seating joint - PTFE Connections - flange, PE fusion socket, PE fusion spigot, solvent ...

DN: 10 mm - 80 mm
Pressure: 16 bar
Temperature: 10 °C - 60 °C

... Connections - flange, PE fusion socket, PE fusion spigot, solvent socket, solvent spigot, threaded socket Approvals - KIWA NSF/ANSI/CAN 61, ACS

DN: 50 mm - 2,400 mm
Pressure: 16 bar - 420 bar

... eccentric butterfly valve, with two-way sealing zero leakage, small torque characteristics, metal sealing valve seat can make it suitable for all kinds of harsh working conditions, the eccentric design ...

DN: 50 mm - 1,800 mm
Pressure: 6 bar - 16 bar

... fluid control, rubber fully covered valve body to make it completely isolated from the medium, so as to be suitable for various corrosive conditions. And compared with traditional gate valves, globe valves ...

DN: 50 mm - 1,200 mm

Gate Valve with a drain valve body material: Carbon steel /Stainless steel / Alloy steel /Special (Monel /Inconel /Hastelly etc.)/alloy steel/ Al-bronze end connection: RF/RTJ/BW operation: Hand ...

DN: 40 mm - 1,600 mm
Pressure: 2.5 bar - 100 bar
Temperature: -10 °C - 200 °C

... and spacings between flanges according to DIN 3202 , EN 558-1 , ANSI B16.10 , ends weld ASME B16.25 . The company Di Nicola produces non-standard at the request of customers . The gate valve body is ...

DN: 100 mm - 3,000 mm
Pressure: 16, 10, 25 bar
Temperature: -40 °C - 200 °C

... be used as a safety valve (positive safety valve able to close even in case of tampering) In addition to the above mentioned technical advantages there is a remarkable economical benefit as this valve ...

DN: 100 mm - 1,400 mm
Pressure: 2.5 bar - 64 bar

... very différent excercise pressure. The use of needle valve with the aid of actuators allows to utilize it in control systems with very différent functions. Water flow régulation actuated by needle valve ...

DN: 25 mm - 150 mm
Pressure: max 22.7 bar

Reliable flow direction control in a hygienic production process  - Two-part valve disc, screwed, with a defined space for the sealing ring for easy installation - Seal resistant to seepage and ripout  - Shaft ...

DN: 0.5 in - 48 in
Pressure: 600 psi - 15,000 psi

Pressure balance lubricated plug valves are metal seated valves providing a tight shut off ( 0 leakage ) sealing, valves shall be regularly lubricated along with their operation by injection ...

DN: 0.5 in - 20 in
Pressure: 1,500 psi - 15,000 psi

The DB&B PLUG VALVES provide the same PLUG VALVES features, with the addition of the “Double Isolation” feature, with a body bleed in between the two plugs. Valves “Face to Face” follows ...

DN: 2 in - 10 in
Temperature: 29 °C - 220 °C

The Dual Seal Double Block & Bleed valve is a soft seated ( 0 Leakage ) single valve that simultaneously blocks both the upstream and downstream flow while allowing the user to verify tightness using ...

DN: 50 mm - 300 mm
Pressure: 0 bar - 16 bar
Temperature: 120 °C

Cast iron (GJL 250) PN 16 gate valve ANSI 125 FF/BS 5150 FF face to face inside screw brass trim for electric actuator. Made in Italy. Fields of application: Industrial plants - Sewage Water - Water ...

DN: 10 mm - 50 mm
Pressure: 10, 16 bar

... DIN / ANSI flanges, BSP or NPT threaded connections • Pneumatic actuator DA, NO, NC or with electric motor 230V / 24V • Box with limit switches position indication (electromechanical and / or inductive) Advantage • ...

DN: 65 mm - 150 mm
Pressure: 16, 10 bar

... PVDF • PTFE seats, EPDM / FPM gasket • Pressures PN10 / PN6 • All connections are glued, soldered, wafer or flanged DIN or ANSI • Electric motor 230V / 24V or pneumatic actuator DA, NC, NO. • Positioner 4-20mA / ...

DN: 50 mm - 600 mm

• DIN or ANSI flange connections • Robust, stainless steel shaft 304 • Manufactured in PVC-U body. PP / PP-GF • Gaskets in EPDM or FPM • Possibility of electric motor or pneumatic actuator DA, NA, NC • Manual lever ...

DN: 50 mm - 600 mm
Pressure: 25 bar
Flow rate: 16 m³/h - 5,400 m³/h

PRESSURE REDUCING VALVE The valve reduces high upstream pressure to a pre-set lower and constant downstream pressure level, regardless of fluctuating flow or varying upstream pressure. A hydraulic regulating ...

DN: 50 mm - 600 mm
Pressure: 25 bar
Flow rate: 16 m³/h - 5,400 m³/h

PRESSURE SUSTAINING VALVE The valve maintains downstream pressure over a pre-set minimum value, regardless of fluctuating flow or varying upstream pressure. Otherwise the valve may ...

DN: 50 mm - 600 mm
Pressure: 25 bar
Flow rate: 16 m³/h - 5,400 m³/h

ALTITUDE CONTROL VALVE This valve controls water level in high level reservoirs to avoid overflow, without any external control system like float control etc. The valve remains completely ...

DN: 2 in - 12 in
Pressure: 300 psi
Temperature: 0 °C - 80 °C

Model HBF-300G , UL Listed Grooved Type Butterfly Valve, cuts or regulates the flow of fluid through the piping systems. Grooved Type Butterfly Valve for fire protection serve as a control valve ...

Pressure: 3.5, 1.5 bar
Temperature: -20 °C - 120 °C

Seal in the drop through opening,packing sealed to the outside Low construction height Flange drillings available to PN1O,ANSI l5Olbs Manual (handwheels chainwheels.bevelgeras)or pneumatic version available InstallatIon ...

Pressure: 1.5, 3.5 bar
Temperature: -20 °C - 120 °C

Seal in the drop through opening,packing sealed to the outside Low construction height Flange drillings available to PN1O,ANSI l5Olbs Manual (handwheels chainwheels.bevelgeras)or pneumatic version available InstallatIon ...

DN: 32 mm - 900 mm
Pressure: 6, 2.5, 16 bar
Temperature: -20 °C - 200 °C

PTFE lined centric butterfly valve for corrosive fluids and high-purity applications. Designed and manufactured for over 20 years in Switzerland, Bianca is built for long-lasting use in highly demanding media and environments ...

DN: 50 mm - 800 mm
Pressure: 10 bar - 50 bar
Temperature: -40 °C - 400 °C

... eccentric butterfly valve Elara is available in forged or cast executions and different body, disc and seat materials. Application fields cover power generation, district cooling and heating as well as chemical processes ...

DN: 80 mm - 1,400 mm
Pressure: 10 bar - 50 bar
Temperature: -196 °C - 700 °C

Triple offset metal to metal seat butterfly valve Titania is specially designed to ensure a perfect tightness in steam, gas, chemical, petrochemical and cryogenic applications. Technical Specifications Market segments •Gas ...