ANSI valves

DN: 0.5 in - 3 in
Pressure: 150 psi

SIZE: 1/2＂～3＂ JOINT END TYPE 1: SOCKET (ANSI /DIN / JIS/ CNS) JOINT END TYPE 2: THREADED (PT/NPT/BSPF) WORKING PRESSURE: 150PSI

DN: 0.5 in - 4 in
Pressure: 150 psi

SIZE: 1/2＂～4＂ JOINT END TYPE: FLANGE(ANSI 、 DIN 、 JIS) WORKING PRESSURE: 150PSI Key words: UPVC flanged double ball valve

DN: 2 in - 12 in
Pressure: 150 psi

SIZE: 2＂～12＂ JOINT END: FLANGE (ANSI /DIN / JIS/ CNS) WORKING PRESSURE: 150PSI

DN: 2 in - 12 in
Pressure: 300 psi
Temperature: 0 °C - 80 °C

Model HBF-300G , UL Listed Grooved Type Butterfly Valve, cuts or regulates the flow of fluid through the piping systems. Grooved Type Butterfly Valve for fire protection serve as a control valve ...

DN: 6 in - 36 in

Emergency Shutdown Valve Quarter-Turn Operation Close Valve In Less Than A Second ESDV features are designed for accuracy and dependability ■ Trunnion-mounted ball valve ■ Fail-safe ...

DN: 25 mm - 300 mm
Pressure: 16, 10, 6 bar
Temperature: -10 °C - 120 °C

... . All valve and actuator packages are tested and issued with certification confirming the actuators functionality before dispatch. Approvals, Features & Benefits • WRAS approved valve** • Suitable ...

DN: 25 mm - 300 mm
Pressure: 16, 10 bar
Temperature: -10 °C - 120 °C

Air actuated butterfly valves with double acting or spring return function General purpose valve with an EPDM liner, offering a long life with low maintenance. Self-lubricating bearings ensure perfect ...

DN: 40 mm - 1,600 mm
Pressure: 2.5 bar - 100 bar
Temperature: -10 °C - 200 °C

... and spacings between flanges according to DIN 3202 , EN 558-1 , ANSI B16.10 , ends weld ASME B16.25 . The company Di Nicola produces non-standard at the request of customers . The gate valve body is ...

DN: 100 mm - 3,000 mm
Pressure: 16, 10, 25 bar
Temperature: -40 °C - 200 °C

... be used as a safety valve (positive safety valve able to close even in case of tampering) In addition to the above mentioned technical advantages there is a remarkable economical benefit as this valve ...

DN: 100 mm - 1,400 mm
Pressure: 2.5 bar - 64 bar

... very différent excercise pressure. The use of needle valve with the aid of actuators allows to utilize it in control systems with very différent functions. Water flow régulation actuated by needle valve ...

DN: 50 mm - 300 mm
Pressure: 0 bar - 16 bar
Temperature: 120 °C

Cast iron (GJL 250) PN 16 gate valve ANSI 125 FF/BS 5150 FF face to face inside screw brass trim for electric actuator. Made in Italy. Fields of application: Industrial plants - Sewage Water - Water ...

DN: 10 mm - 50 mm
Pressure: 10, 16 bar

... DIN / ANSI flanges, BSP or NPT threaded connections • Pneumatic actuator DA, NO, NC or with electric motor 230V / 24V • Box with limit switches position indication (electromechanical and / or inductive) Advantage • ...

DN: 65 mm - 150 mm
Pressure: 16, 10 bar

... PVDF • PTFE seats, EPDM / FPM gasket • Pressures PN10 / PN6 • All connections are glued, soldered, wafer or flanged DIN or ANSI • Electric motor 230V / 24V or pneumatic actuator DA, NC, NO. • Positioner 4-20mA / ...

DN: 50 mm - 600 mm

• DIN or ANSI flange connections • Robust, stainless steel shaft 304 • Manufactured in PVC-U body. PP / PP-GF • Gaskets in EPDM or FPM • Possibility of electric motor or pneumatic actuator DA, NA, NC • Manual lever ...

DN: 0.5 in - 8 in
Pressure: 0 bar - 20 bar
Temperature: -50 °C - 250 °C

... • Self-relief seats • Low emission design Standards • Designs: ANSI B16.34 ISO17292 API6D • Face to face ANSI B16.10 • Top flange ISO 5211 ...

DN: 50 mm - 1,200 mm
Pressure: 10, 6, 5, 4, 2 bar

The Knife Gate Valve is a uni-directional wafer valve for general industrial application.It is predominantly used in the paper and pulp chemical industries mining industries power station ...

DN: 50 mm - 600 mm
Pressure: 10, 4, 6, 5 bar

... The nominal widths available for the knife gate valves range from DN50 to DN600 with flange connections complying with EN 1092 PN10 or alternatively, ANSI B16.5 (class 150). Actuators of Knife Gate Valve ...

DN: 0.5 in - 12 in
Pressure: 175 psi
Temperature: 121 °C

... water systems AB1953 Certified Vermont S152 Certified ANSI/NSF-61 Annex G Compliant Calibrated Accurate Flow Control and Measurement Sizes from ½” – 12” Ball valve style ½” through 4” Globe valve ...

DN: 0.5 in - 8 in

ANSI #150 full port Flanged end connections Efficient heat transfer ■ Narrow space between extension ID and stem OD allows the stem seal to remain at an ambient temperature. Stem ■ ‘Blow-out’ proof ■ Solid ...

DN: 0.25 in - 8 in
Pressure: 6,000 psi

Cost effective ANSI Class up to 2500. Smooth two-way flow, tight shut off, and instant adaptability to changing pressures and temperature variations. Materials Forged or rolled bars, sourced and stocked only from ...

DN: 0.25 in - 6 in
Pressure: 3,700 psi
Temperature: 650 °C

... , alloys, Carbon Steel – selected to meet temperature and application. ASME B16.34 listed cast or forged material for the valve body and ends. Surface treatments & coatings – LTPN, HVOF Cr₃ C₂ (Chromium Carbide), HVOF ...

The M&J Expanding Gate Valve is a round body cast steel valve with a thru conduit in the open position and is normally manufactured in class 600 & higher. The M&J Compact Expanding Gate Valve ...

... style control valves, the GS-General Service Valves combines advanced levels of body configuration, trims and actuation to produce a valve assembly capable of premium performance at a ...

... applications where the valves typically remain closed for long periods of time to isolate steam flow.: Cast & fabricated design. Wide size configuration Extremely flexible Flanged or butt weld ...

DN: 1 in - 12 in
Pressure: 20 mbar - 70,000 mbar
Temperature: -20 °C - 60 °C

... For disengaging by decrease on pressure it is possible to regulate the shut-off valve from 0 to 15 bar; over matching the EN 14382 standard. The security shut-off valves are very fast disengaging, ...

DN: 1, 2 in
Pressure: 8 bar

The valve CELTIC-N is a new model developed by Gascat Engineering to use in blanketing systems. Blanketing systems is a process of using an inert gas such as nitrogen or carbon dioxide, in storage tanks to maintain a ...

DN: 200 mm

Fully welded ball valve, standard model, available in the sizes up to DN 200 (8”) full bore or to DN 300 (12”x8”) reduced bore, PN 10÷50 or ANSI 150-300, in carbon steel with floating ball in stainless ...

DN: 80, 100 mm

Fully welded ball valve, standard model, regularly available in the sizes up to DN 80 (3”) full bore or to DN 100 (4”x3”) reduced bore (bigger diameters on request), PN 10÷50 or ANSI 150-300, in carbon ...

DN: 250, 300, 400 mm

Fully welded ball valve, standard model, available in the sizes DN 250 (10”) and DN 300 (12”) full bore or from DN 300 (12”x10”) to DN 400 (16”x12”) reduced bore, PN 10÷50 or ANSI 150-300, in carbon steel ...

DN: 0.5 in - 40 in

Cryogenic Cast Steel Ball Valve Supplier: Cast Carbon, Stainless Steel Ball Valves, 1/2-40 Inch, 150-2500 LB, API 6D, BS 5351, ASME B16.34, DIN 3202. Cryogenic ball valves are available ...

DN: 1.5 in - 48 in

Stainless Steel Gate Valve Supplier: SS Gate Valves, 1-1/2-48 Inch, CL150-CL2500, API 600, ASME B16.34, ASTM A351 CF8, ASTM A351 CF8M, ASTM A351 CF3, ASTM A351 CF3M. Med Stainless Steel Gate Valves ...

DN: 1.5 in - 48 in

Full Port Gate Valve Manufacturer: Cast Steel Gate Valves, Full Port, API 600, ASME B16.34, 1-1/2-48 Inch, Class 150-2500 LB, FF, RF, RTJ, ISO 5211, Carbon Steel, Stainless Steel. Cast Steel Gate Valve ...

DN: 50 mm - 1,200 mm
Pressure: 16 bar
Temperature: -46 °C - 550 °C

Design Standard ANSI B16.1 End Connections Flange ASME B16.5/B16.47 Features of 3-way ball valves are as follows: 3-WAY BALL VALVE has two kinds of flow passage pattern:Type ...

DN: 2 in - 40 in
Temperature: -29 °C - 450 °C

... parts Advantage: Professional: We are professional manufacturer of valves.Ensure our valves is quality controlled and reliable. Quality Control: We have been engaged in valve ...

DN: 2 in - 48 in
Pressure: 25 bar
Temperature: -29 °C - 650 °C

... indicate the standard diameter, pressure and valve connection required for the valve. If not specified, the size is given in the specification; 2. If there are special requirements for the required ...

DN: 8 mm - 100 mm
Pressure: 1,000, 800 psi
Temperature: -20 °C - 360 °C

... welding, to undertake welding • Shell Wall Thickness: ANSI B16.34 Class 300 • Body: CF8/CF8M • Ball: SS316 • Stem: SS316 • Seat: PTFE/PPL Installable Accessories Solenoid Valve Limit ...

DN: 2 in - 64 in

• Pressure: ANSI CLASS 150LB-2500LB • Types of connection: butt welding • Design of valves is in accordance with: API6D,ASME B16.34 • Length: ASME B16.10 • Connection standard: ANSI ...

DN: 2 in - 64 in

• Pressure: ANSI CLASS 50LB-2500LB • Types of connection: flange and butt welding • Design of valves is in accordance with: API6D,ASME B16.34 • Length: ASME B16.10 • Connection standard: ANSI ...

DN: 300 mm - 3,000 mm
Pressure: 16 bar
Temperature: -25 °C - 300 °C

SAFETY QUICK-CLOSING BUTTERFLY FLAP VALVE TYPE PKIII Being part of the proven KÜHME high-performance valve series for industrial applications, the PKIII type is used in any application where safe and ...

DN: 15 mm - 200 mm
Pressure: 16, 40 bar
Temperature: -29 °C - 225 °C

... and EN 558, GR.27 FTF dimensions acc. to ANSI B 16.10 flanges acc. to EN 1092 flanges acc. to ANSI B 16.5 top flange DIN EN ISO 5211 full bore The high pressure series for ...

DN: 80 mm - 500 mm
Pressure: 40, 16 bar
Temperature: -29 °C - 225 °C

... rings FTF dimensions acc. to EN 558, GR.1 and EN 558, GR.27 FTF dimensions acc. to ANSI B 16.10 flanges acc. to EN 1092 flanges acc. to ANSI B 16.5 top flange DIN EN ISO 5211 ...

DN: 15 mm - 200 mm
Pressure: 40, 16, 10 bar
Temperature: -29 °C - 400 °C

... acc. to ANSI B 16.10 flanges acc. to EN 1092 flanges acc. to ANSI B 16.5 top flange DIN EN ISO 5211 full bore INTEC K200 - 2-piece Flanged Ball Valves INTEC ...

DN: 6, 4, 8 mm
Pressure: 0 bar - 20 bar
Temperature: 0 °C - 140 °C

... Römer flow and stop valve program consists of throttle, shut-off and check valves. The function fittings offer fine adjustment possibilities for the precise regulation of fluid flows. Throttle valves ...

DN: 65 mm - 304 mm
Pressure: 300 psi

1.Design Standard: AWWA C515 2.Nominal Pressure: 300PSI 3.Flange Standard: ASME/ANSI B16.1 Class 125 or ASME/ANSI B16.42 Class 150 or BS EN1092-2 PN16 or GB/9113.1 4.Epoxy resin coating both inside ...

DN: 65 mm - 304 mm
Pressure: 300 psi

1.Design Standard: AWWA C515 2.Nominal Pressure: 300PSI 3.Flange Standard: ASME/ANSI B16.1 Class 125 or ASME/ANSI B16.42 Class 150 or BS EN1092-2PN16 or GB/T9113.1 4.Epoxy resin coating both inside ...

... adjustment ratios. The same requirements arise during low-load operation. Versions Forged valves in straight, angled or Z form, with welded studs as per DIN, ANSI or other standards. Advantages ...

Circulation control valve Tasks Circulation control valves regulate the flow rate during drum circulation on forced-flow steam generators. Versions Forged valves in straight, angled ...

Injection control valve Tasks Injection control valves are primarily flow control valves, which means they supply the required amount of cooling water to the point of use. The pressure ...