Valves with actuator

Pressure: 40, 30 bar
Temperature: -40 °C - 80 °C
Flow rate: 2 l/min

... reducing valve type PM and PMZ is a directly actuated valve with a piston and is controlled electro-proportionally. It continuously maintains a constant pressure on the ...

DN: 0.375, 0.5, 0.75 in
Pressure: 320, 315 bar
Temperature: -40 °C - 80 °C

... flow control valve type SE and SEH is available as a single valve for pipe connection or as a manifold mounting valve. Pressure-limiting valves and randomly switchable ...

DN: 3 mm
Pressure: 350 bar
Temperature: -40 °C - 80 °C

The flow divider, type TQ is, due to its simple design, an economical solution for simple dividing tasks, e.g. if two hydraulic consumers with varying loads supplied from one pump are to be moved simultaneously without interaction. Features ...

DN: 25 mm - 250 mm
Pressure: 0 bar - 160 bar
Temperature: -60 °C - 530 °C

Sliding gate control valve for high-pressure applications Product line GS4 The high-pressure sliding gate control valve type 8021 with integrated positioner is suitable for a wide range of process ...

DN: 15 mm - 80 mm
Pressure: 0 bar - 40 bar
Temperature: -40 °C - 220 °C

... #300 Accessories - Positioner electronics Limit switches Position feedback. All control actuators are also available with fail safe feature. Actuator - Control force: 800N Motor voltages: ...

DN: 15 mm - 50 mm
Pressure: 0 bar - 40 bar
Temperature: -30 °C - 220 °C

... Accessories - Limit switch Pilot valve Manual override Stroke limitation . . . Actuator variants - Piston actuator of - Brass (chrome plated) - Stainless steel - Polymer Stainless ...

Pressure: 0 psi - 10,000 psi
Flow rate: 0 l/min - 857 l/min

... available - Fire tested in accordance with AP1 607, API 6FA and ISO 10497 Further product configurations available Up to 1"" actuated solutions available

DN: 8 mm - 80 mm
Pressure: 40, 63 bar
Temperature: -20 °C - 80 °C

Actuated valves in the RV-FLUID series consist of a pneumatic rotary actuator series R4 that controls a ball or a butterfly valve. Ball valves come in ...

DN: 20, 25, 13 mm
Pressure: 1 bar - 10 bar
Temperature: -10 °C - 60 °C

• Poppet valve • Indirectly actuated • Brass design • In-line mounting • Poppet valve, indirectly actuated with diaphragm control

Pressure: 1 bar - 10 bar
Temperature: -10 °C - 60 °C
Flow rate: 2,400, 3,800, 4,000, 10,500, 14,000 l/min

• Poppet valve • Indirectly actuated • Brass design • In-line mounting The valve is actuated only while pilot pressure is applied.

DN: 15 mm - 150 mm
Pressure: 40, 16, 25 bar
Temperature: -60 °C - 450 °C

Pressure reducing valve with diaphragm actuator eClass-No.: 37011101 Application: Industrial installations, processing technology, plant manufacturing, etc. Medium: Steam, neutral gases, vapours ...

DN: 2.5 mm
Pressure: 2 bar - 10 bar
Temperature: 0 °C - 60 °C

... with plug button 3/2 NO or NC with several actuation options, mechanical or manual. Thanks to the usage of the adaptor all actuators can be mounted on microvalves and it is also possible to combine two microvalves to ...

DN: 0.125 in - 1 in
Pressure: 2.5 bar - 7 bar
Temperature: 0 °C - 60 °C

The GEMÜ Q40 2/2-way pinch valve has a stainless steel piston actuator and is pneumatically operated. The valve guides a tube which is compressed from above by a compressor to control ...

DN: 12 mm - 65 mm
Pressure: 0 bar - 10 bar
Temperature: -10 °C - 80 °C

... Diaphragm valve is actuated by a motorized hollow shaft actuator. It is based on technology that does not use brushes or sensors and therefore guarantees high performance and a long service ...

DN: 10 mm - 65 mm
Pressure: 0 bar - 10 bar
Temperature: -10 °C - 60 °C

... diaphragm valve is actuated by a motorized hollow shaft actuator. It is based on technology that does not use brushes or sensors and therefore guarantees high performance and a long service ...

Maximator offers a complete line of pneumatic actuated high pressure needle valves, fittings, tubing, check valves, adapters and couplings as well as accessories for High Pressure Applications ...

DN: 90 mm
Pressure: 4 bar - 8 bar
Temperature: -20 °C - 80 °C

... valves (1/4" to 1") as well as check valves for hydrogen refueling systems and generally for use in hydrogen applications. Hydrogen Valves All Valves for Hydrogen refuelling applications ...

DN: 20 mm - 50 mm
Temperature: -20 °C - 70 °C

3 WAYS F/F/F BALL VALVE WITH L BORE (58213) WITH IP68 ELECTRIC ACTUATOR (50844)

DN: 0.5 in - 3 in
Pressure: 40 bar
Temperature: -30 °C - 80 °C

Ball valve, 2/2 way Tork-KV 903 series is made of Stainless steel and have screw connection with ISO 5211 flange. The body is made of full orifice and coated with nickel while the O-ring has PTFE and elastomer. It has ...

DN: 25 mm - 400 mm
Pressure: 0 bar - 10 bar
Temperature: 180 °C

Energy saving valve for the precise and economical control at low loss of pressure of liquids and gases that can be either clean or contain particles. For : Air for aeration in wastewater treatment plant Gases Municipal ...

DN: 100 mm - 1,400 mm
Pressure: 2.5 bar - 64 bar

... very différent excercise pressure. The use of needle valve with the aid of actuators allows to utilize it in control systems with very différent functions. Water flow régulation actuated ...

DN: 50 mm - 1,200 mm
Pressure: 2.5 bar - 100 bar
Temperature: -45 °C - 250 °C

Di Nicola manufactures single eccentric butterfly valves type lug, wafer and flanged in ductil iron EN GJS 400 to EN GJS 500 , malleable cast iron GJL 250 and high- nickel NI resist , carbon steel ASTM 216 WCB / N + GP ...

DN: 50 mm - 800 mm
Pressure: 25, 40, 10, 16 bar

... B16.10 , test according to EN 12266-1 . Di Nicola produces a range of accessories such operating headstocks , electric actuators , hydraulic actuators with and without lever and counter ...

DN: 50.8, 3, 4 mm
Pressure: 10, 16 bar
Temperature: -10 °C - 140 °C

... Bi-directional zero leakage butterfly valve.ISO Pad for mounting, Gear Operator /ActuatorExtremely small play between the stem and disc due to ‘Double D’ drive.Accurate dual stem sealing prevents leakage.Butterfly valve ...

DN: 50 mm - 600 mm
Pressure: 40 bar
Flow rate: 16 m³/h - 5,400 m³/h

PROPORTIONAL PISTON ACTUATED VALVE DESIGNED FOR HIGH DIFFERENTIAL PRESSURES The valve maintains downstream pressure to a constant and pre-set rate of upstream value. ...

DN: 80 mm - 300 mm
Pressure: 16 bar
Flow rate: 10 m³/h - 1,600 m³/h

ELECTROHYDRAULIC ON/OFF VALVE The valve opens fully or shuts off in response to electric signals. The valve is controlled by a solenoid that allows control liquid ...