DN: 40 mm - 600 mm
Pressure: 16 bar
Temperature: 70 °C
... Stainless steel spindle with rolled thread and bearing. Total sufrace rubbered wedge with replaceable spindle nut. Gate valve with full bore. All parts are protected against corrosion. ...
DN: 15 mm - 50 mm
Pressure: 0 bar - 13 bar
Temperature: -10 °C - 180 °C
... Steel CF8M (Aisi 316) ACTUATOR Stainless Steel CF8 (Aisi 304) Pipe Size G1/2” – G3/4″ – G1″ – G1 1/4″ – G1 1/2″ – G2″ SEAL PTFE PIPE SIZE ACTUATOR G1/8″ Options 3/2 Command Pilot Visual Positioning Indicator (Standard) Electrical ...
DN: 25 mm - 100 mm
Pressure: 0.2 bar - 10 bar
Temperature: -10 °C - 140 °C
... return) or entry of a CIP solution into a tank (through a spray ball). The A470 valve provides double safety: the two discs are simultaneously actuated by only one actuator. When the two discs are ...
INOXPA
... Carbon Steel - : ASTM A 105 Forged Stainless Steel - : ASTM A 182 Gr F304 / F316 Design & Testing International Standard: Valve Design - : API 594 / API 600(ISO 10434) / API 6D(ISO 14313) / API 602 / API 603 / API 608 / API 609 / IS ...
... Pneumatic Soft Sealed Butterfly Valve Special point 1. Small and lightweight, easy disassembling and maintenance, and can be installed in any position. 2. The structure is simple, compact, 90 DHS rotary rapid opening and closing. 3. ...
... The Pneumatic Flange Ball Valve is a a single-acting/double-acting valve composed of cast steel, WCB, and stainless steel. The actuator cover is made of aluminum alloy, and it has nominal dimensions of ...
DN: 0.375 in - 3 in
Pressure: 3 bar - 16 bar
Temperature: -20 °C - 180 °C
... angle seat valves offer an excelent flow control with low pressure loss. Valves can be installed in any position preferably with actuator face up. Actuators can be rotated through ...
DN: 25 mm - 200 mm
Pressure: 6 bar - 10 bar
Temperature: 130, 150 °C
... design of its one piece valve body and the radial sealing of both valve seats along with the balanced valve disks enable a perfectly safe CIP/ IP cleaning, thus ensuring extremely high security for your ...
DN: 0.5, 0.75, 1 in
Pressure: 1,000,000 Pa
Temperature: -15 °C - 50 °C
... The T20-S2-B Tonhe Motorized Ball Valve, from China, is used for water control. It is suitable for water heater, water meters and water treatment. It is made of NPT/BSP 3/4 Stainless Steel Valve with a voltage of 5VDC, ...
DN: 1 in - 10 in
... CONTROL GAS VALVES Reflux 919 The Reflux 919 Control is a pneumatic control valve, specifically designed for use with normal gas, commonly operated by a direct-acting type diaphragm actuator (mod. ...
DN: 100, 200, 250 mm
Pressure: 0 mbar
... Category - Gate valve, manual, ISO, stainless steel Actuation - manual via hand crank Item description - Long life, bellow sealed gate valve for high vacuum (HV) mounting flanges DN100 ISO-F according to ISO 1609 works ...
Pressure: 7 bar
... µL to 100 µL. A versatile valve The valve can be operated using pressure up to 7 bar (100 psi), and the wetted material is PEEK, a highly chemically and biocompatible material. Fluigent software for automation The ...
DN: 15 mm - 200 mm
Pressure: 16, 25, 40, 64 bar
Temperature: -196 °C - 450 °C
... Electric Actuated Globe Control Valve Body: Cast Steel, Cast Iron, Ductile Iron, SS304, SS316, SS316L Bonnet: Cast Steel, Cast Iron, Ductile Iron, SS304, SS316, SS316L Lining Material: ...
Valvesonly Europe
DN: 10 mm - 80 mm
Flow rate: 4 m³/h - 127 m³/h
... Integrated pneumatic actuator NAMUR solenoid mounting pad Compact assembly Visual indicator High Cycle-Life Actuator rotates 360° ...
DN: 2.54 mm - 8.74 mm
Pressure: 276 bar - 1,379 bar
... Normally Open, Normally Closed, Air Pilot Actuated.These valves open or close high pressure oil or plain water back to tank or to another line or high pressure gas to another line. High pressure section alloys are stainless steel with ...
Hydraulics International
DN: 0.5 in - 2.5 in
Pressure: 16 bar - 40 bar
Temperature: -40 °C - 250 °C
... Self-actuated flanged or threaded EN or ASA Pressure reducing valve, suitable for steam, gases and liquids for reduce pressure in lines, available in different materials and pressure ranges. ...
EFSVALVES
DN: 10 mm - 150 mm
Pressure: 10 bar
Temperature: -10 °C - 25 °C
... USP Certified hygienic design Maximum reliability Wide range of customized solutions ZVF is a butterfly valve with pneumatic actuator which cuts off and monitors fluids in the process flow by movements of opening ...
Pressure: 0 Torr - 760 Torr
... pressure control applications in conjunction with mass flow controllers. These valves utilize a micrometer-set third position from which the valve can be remotely actuated to some degree of the open ...
DN: 50 mm - 1,000 mm
... Knife gate valve, uni-directional. Available as metallic sealing or with other kinds of seals. Stainless steel spade. Available with actuator. Suitable for powder media. Connections for cleaning nozzles available. ...
DN: 125, 200, 150 mm
Pressure: 25, 16, 40 bar
Temperature: 0 °C - 400 °C
... DESCRIPTION • 2-way and 3-way control valve with flanged connection PN16-25-40 • Body Nodular cast iron GGG40/3 or AISI316 • Seats in stainless steel on or in the body • Stem seals PTFE- PTFE+ FPM- graphite Self-adjusting • Plug ...
DN: 40 mm - 300 mm
Pressure: 6, 16, 10 bar
Temperature: -20 °C - 130 °C
... • Reduction gear with manual operation also for small DN. ON REQUEST: • Kit to convert from a manual valve to an actuated valve. • For further special requests please consult our technical/commercial ...
EFFEBI
DN: 0.5 in - 4 in
Pressure: 1,000 psi
Temperature: -50 °F - 475 °F
... sales team to actuate your valve package - save time and money with Valtorc International. The series 140 ball valve is the valve used in our most popular 3 piece ball valve actuated ...
Valtorc
DN: 1.5 mm - 382 mm
Pressure: 0 bar - 16 bar
Temperature: 0 °C - 140 °C
... The Alfa Laval Sanitary Ball Valve (SBV) is a hygienic ball valve designed with a bore diameter the same size as the pipeline diameter. The full-bore design with zero flow restriction and minimum pressure drop makes the ...
... proven electronically actuated EGR valve technology. Built for tough conditions Because of the harsh environment of its location on the intake manifold, we only use the highest quality materials such as robust ...
Pressure: 0 bar - 4,200 bar
Temperature: -20 °C - 80 °C
... aforesaid valves allow not only to fill, but also to carry out the delivery under pressure with nominal diameters being double compared with the valves that are normally on the market for the pressure range up to 4200 ...
the best suppliers