Diameter : 0.3 mm - 20 mm
Length: 19 mm - 205 mm
... ground standard twist drill made from heavy-duty high speed steel. The fully ground twist drill has a precise concentricity. Thanks to the split point, this drill has good centring properties and requires ...
RUKO GmbH Präzisionswerkzeuge
Diameter : 1 mm - 20 mm
Length: 34 mm - 205 mm
... high-performance drill bit with pronounced hot hardness resistance. Ideal for drilling stainless, acid and heat-resistant steel with high strength. High-performance high-speed steel with 5 % cobalt ...
RUKO GmbH Präzisionswerkzeuge
Diameter : 0.3 mm - 20 mm
Length: 19 mm - 205 mm
... High-performance ground standard twist drill made from heavy-duty high speed steel. The fully ground twist drill has a precise concentricity. Thanks to the split point, this drill has good centring properties ...
RUKO GmbH Präzisionswerkzeuge
Diameter : 13, 19 mm
Length: 320, 335 mm
... you to drill the compressed air distribution line under pressure with ease and safety. The main advantages derived from the use of DT: No down time! You don’t have to empty the system or stop Production. Aluminium produced ...
Materials suitable for processing: Carbon steel, stainless, cast iron, aluminum alloy, high temperature alloy, non-metallic materials, etc.
Diameter : 12.7 mm
Length: 60 mm
... work for laminated wood flooring, multilayer solid wood engineered flooring, bamboo flooring, solid wood door, etc. Features: Compared with other material of woodworking tools, the PCD router bit have ...
Diameter : 0.8 mm - 1.5 mm
Length: 40 mm
... frames and CD disc holders. Features of PCD Router Bit: 1.The diamond router bit features of a sharp cutting edge, high processing precision, good abrasive resistance and long service life. 2.The bit ...
... Stack drilling with LMT Belin One-shot Drills in Sandwich PCD or diamond coated carbide This type of tool is primarily dedicated to aerospace customers. For riveting of CFRP structural components, ...
Diameter : 0.8 mm - 3 mm
... LMT Belin Mono-PCD Drills for small diameters There are many potential applications for PCD drills with very small diameters. But not only high Si-Alloys used in Aerospace or precious metals used in jewellery or ...
... CFRP “W-Point” Drill Eliminates Problems of Fraying and Delamination Drilling in CFRP can be difficult because three major considerations have to be addressed to successfully produce a clean cut: (1) hole quality entering ...
... the process and the quality of the product. This special drills with PCD components increases the cutting sharpness over hard metal , and service life of the tool. Special twist drill in image have also special ...
Diameter : 0.7 mm - 2.35 mm
... SHANK Ø 2.35 MM. Available in Ø 0.7 mm to 2.3 mm. ...
Diameter : 0.5 mm - 1.3 mm
Length: 9, 10 mm
... SHANK Ø 2.35 X44 MM Drills available in several diameters. ...
Diameter : 0.8 mm - 1.5 mm
Length: 10, 12 mm
... SHANK Ø 2.35 X 44 MM Available in Ø 0.8mm to 1.5 mm. ...
Diameter : 0.3 mm - 3 mm
Length: 38 mm
... The small-diameter PCD drills developed by SNSTC can achieve the excellent effects like high-precision, long-life, and high-efficiency in various advanced processing applications. ...
Diameter : 1 mm - 13 mm
Length: 12 mm - 101 mm
IZAR CUTTING TOOLS S.A.L.
Diameter : 1 mm - 13 mm
Length: 12 mm - 101 mm
IZAR CUTTING TOOLS S.A.L.
Diameter : 1 mm - 13 mm
Length: 12 mm - 101 mm
IZAR CUTTING TOOLS S.A.L.
Diameter : 12 mm - 40 mm
Length: 320 mm - 570 mm
... For fitting in SDS-max chucks For rapid drilling in concrete, masonry and natural stone Advantages Four-cutting-edge drill bit for good centring in the drill hole Good removal ...
Diameter : 4 mm - 36 mm
Length: 80 mm - 110 mm
... Minimum burr formation Long service life Good torque transmission Less effort when drilling Features suitable for Sheet, pipe, NF metal and plastic ...
Diameter : 1 mm - 25 mm
... FE110 HSS twist drills DIN338 roll forged. 1.0-13.0 mm ascending by 0.5 mm. Packed in display wallet FE100R HSS twist drills DIN338 roll forged. 10.5-20.0 mm ascending by 0.5 mm. Reduced shank FE109 HSS twist ...
Diameter : 0.3 mm - 2.25 mm
Krino S.p.A.
Diameter : 1 mm - 10.2 mm
Length: 32 mm - 53 mm
... Product overview
HSS twist
drill
bit Ø 4.2 mm from Völkel, designed for precise holemaking in industrial applications.
Key specifications
- Product name: Spiral drill
VÖLKEL GmbH
Diameter : 0.5 mm - 12.3 mm
Length: 28 mm - 205 mm
... Drills 2 flutes DIN338. This product can be customized according to specific customer requirements. ...
DueCi SRL
... high levels of efficiency when drilling deep holes up 25 x diameter MP-X - A range of solid carbide multi-application drills - for high productivity drilling of precision holes in most ...
Dormer Pramet
Diameter : 6 mm - 14 mm
Length: 35 mm
... HSS twist drills with 19 mm (3/4”) Weldon shank Twist length 35 mm ...
Diameter : 0.58 mm
Length: 7 mm
... Premium materials: Sub-micron carbide grades with super finish coatings to reduce tool wear and chip packing. Ta-C diamond coating: Ideal for aluminum applications. New drill type: Gun drill. Exceptional ...
Whizcut of Sweden AB
Diameter : 3 mm - 20 mm
Length: 9 mm - 100 mm
... AlCr-based coating for general-purpose drill bits, which has excellent wear resistance, heat resistance, and meltability resistance; 2. Adopting a new groove shape, reducing cutting resistance and improving drill ...
... automatic machines. This arrangement contains bores for blind drilling cavities or high-powered alloyed steel, tungsten carbide and polycrystalline diamond. The heavy-duty body drills in tungsten ...
Diameter : 3, 4, 5, 6 mm
Length: 60, 75, 85, 90 mm
... HSS DRILL BIT + MANDREL FOR WOOD Centring point, 2 lay-out markers. 90° mandrel with 5 cuts. ...
Diameter : 2 mm - 20 mm
Length: 0 mm - 80 mm
... Regrindable solid carbide high performance drills for all workpiece materials 2-20mm diameter, up to 4 X D - with and without coolant - for reamed tolerance holes drilled from solid at high feed rates ...
Sumitomo Hardmetal Division
Diameter : 18, 25 mm
... in one drill body. It is not possible to integrate the modules into solid carbide drills. Due to the compact size of the chamfering module, it can be installed directly behind the drill ...
Diameter : 1 mm - 20 mm
Length: 38 mm - 104 mm
... 120° spotting drills developed for general machining. Can only be used on the point. ...
DIXI Polytool
Diameter : 10 mm
Length: 21.4 mm
... Aludrill Ø 9.0 mm with flat finish for M10 cold forming tap PART SPECIFICATION THREAD SIZE - M10 FINISHING - Plane surface SHAFT DIAMETER - 14.0 mm MATERIAL/MACHINE PARAMETERS MIN. MATERIAL THICKNESS - 1.0 mm MAX. MATERIAL THICKNESS - 2.5 mm BENEFITS ...
FLOWDRILL
Diameter : 4 mm - 12 mm
Length: 12 mm - 96 mm
... with polished flutes New 3 Flutes Solid Carbide Drill for Increased Productivity As part of TaeguTec’s new SFEED-TEC series of technologically advanced cutting tools, the SOLID-3- DRILL ...
TAEGU TEC España
the best suppliers