Solid drill bits

... quality solid carbide drill family with a clear focus on cost efficiency: Can be used universally with all materials and with a broad range of products. Walter is continuing to build on this with the ...

Walter is launching a newly developed solid carbide step drill for aluminium in the form of the DC166. Going above and beyond the efficiency offered by a normal step drill that combines ...

DA110 Perform HSS drill – cost-effective in all materials. Can be used universally with various different materials Tip geometry for optimum centring accuracy Maximum accuracy on the component thanks to precision-ground surfaces

Diameter : 0.5 mm - 6 mm
Length: 30 mm - 60 mm

... Its key features include a carbide alloy, different diameter sizes in 0.5, 1.0, 2.0, 3.0, 4.0, 5.0 and 6.0mm diameter, a drill diameter ranging from 0.1 to 6mm, a point angle of 90° or 120°, an optional coating, presence ...

Diameter : 0.1 mm - 1.5 mm
Length: 30 mm

The MiquDrill 200 comes with a complete short drill that is made of carbide alloy that digs holes of approximately 2-3 x, creating better preparations. It has a diameter range of 0.1 to 1.5 mm and increases every 0.01 ...

Diameter : 0.1 mm - 3 mm
Length: 30 mm - 60 mm

MiquDrill 210 is made from carbide alloy with a diameter range of 0.1 to 3.0 mm or .004" to .12". It is built for high quality micro machining and is highly recommended for aluminum steels up to 1400 N/mm2, cast iron, copper and spheroidal ...

Diameter : 3 mm - 16 mm
Length: 62 mm - 133 mm

... DrillmaxTM high-performance solid carbide drills is part of the 3 to 16mm and length/diameter ratios of 5×D and 8×D for small diameter ranges. It features an effective coating technology that allows longer ...

Diameter : 3 mm - 16 mm
Length: 66 mm - 133 mm

... results in long tool life combined with excellent machining results. Variant: Drill diameter: 3.00 16.00 mm Hole tolerance: IT9 (achievable) Drilling depth: 5×D Shank shape: HA/HE ...

Diameter : 3 mm - 8 mm
Length: 138 mm - 302 mm

... mm and for 30×D in diameters of 3.0 to 8.0 mm. The spiral-fluted deep-hole drills have four guide chamfers, ensuring good guidance. Variant: 4 x guide chamfers Drill diameter:for 20×D: 3,00 ...

This AMECA hand-operated installation tool drilling bit is the ideal unit to use with applications that require a commercially-available standard drill bit. All AMECA ...

Diameter : 0.7 mm - 20 mm

Seco presents the latest in solid carbide drills in the Seco Feedmax range. These are highly efficient with little cost and provide up to 0.7mm of feed per revolution. The drills have ...

Diameter : 5 mm - 14 mm

... The SD245A has a specific drill point along with large margins to perform in competitive drilling situations using various exit shapes. It consists of hole quality with an equal performance to that of ...

Diameter : 6 mm - 16 mm

Drill and reamer should be applied with a sequential operations for generating a hole with good quality. It can drill so many holes in a single pass with the geometry of optimized drill ...

Diameter : 4.1 mm - 20 mm
Length: 80 mm - 205 mm

Diameter : 4 mm - 10.3 mm
Length: 60 mm - 90 mm

ADF Carbide Flat Drill for a wide range of applications.

Diameter : 2 mm - 20 mm
Length: 78 mm - 225 mm

The WDO Drill series, created by OSG Europe, is a drilling tool that features variety of models for different applications. It is composed of Carbide drills 3D, 5D, 10D, 15D, 20D and ...

... needs and request. WhizCut design micro drills starting at 0,05 mm in any drill form or geometries. Why settle for less when you can have the ideal drill for the job, every time. All ...

With WhizDrill we have put together a range of micro drills that start at 0,1 mm and go up to 3 mm. These can be ordered to any geometry and shank sizes in stock are 1,00 mm, 1,50 mm, 2,00 mm, 2,50 mm, 3,00 mm, 1/8 and ...

Diameter : 0.2 mm - 3 mm
Length: 25 mm - 42 mm

With WhizDrill we have put together a range of micro drills that start at 0,1 mm and go up to 3 mm. These can be ordered to any geometry and shank sizes in stock are 1,00 mm, 1,50 mm, 2,00 mm, 2,50 mm, 3,00 mm, 1/8’ and ...

RUKO ULTIMATECUT Step drill - Unique in every step. + 5 in 1 tool + Up to 75% time savings + Ultimate flexibility ULTIMATECUT Step drills HSS RUnaTEC, spiral fluted with turbo tip The ULTIMATECUT ...

Twist drill DIN 338 type N, HSS-G with TiN-coated bits High-performance ground standard twist drill made from heavy-duty high speed steel. The fully ground twist drill ...

Diameter : 1 mm - 16 mm
Length: 34 mm - 178 mm

... Präzisionswerkzeuge offers curved drill bit or straight shank, that is made from robust high speed steel. The steel material has a reinforced drill core and parabolic flute, which ensures optimized chip ...

We have extended our Force program of solid carbide drills with a specific range for stainless steel applications. The Force M assortment of drills provide a high level of productivity ...

... high levels of efficiency when drilling deep holes up 25 x diameter MP-X - A range of solid carbide multi-application drills - for high productivity drilling of precision ...

Diameter : 1 mm - 16 mm
Length: 34 mm - 178 mm

A002 - HSS TiN tip coated jobber drill - features self-centring split-point for excellent positional accuracy and hole quality

Specially made for the machining of austenitic stainless steels, the twist drills EF-Drill-VA are available in the designs acc. DIN 6537 short (3 x D) and long (5 x D).

Upon request, with respect to our drill design EF-Drill C-STEEL, a chamfer drill type EF-Drill C-VA is also available; this one as with our twist drill ...

EF-Drill the new solid carbide c of EMUGE is the result of extensive development work. The very latest findings regarding tool geometry, cutting material and coatings went into this tool. The drill ...

Diameter : 3 mm - 36 mm
Length: 70 mm - 98 mm

... the next step. The tool's keyway allows it to make a chipping cut during drilling for better chip removal. The geometry of this keyway, which is arranged around the drill, results in a longer cutting ...

Diameter : 6 mm - 60 mm

... Conical One Lip Bits HSS DM 05 integrated with laser-etched scale from ALFRA. These are ideally used for sheet metal working. Applications include electronic industries, engineering, HVAC systems and panel building. ...

Diameter : 1 mm - 20 mm

The solid carbide spiral drill from Arno-Werkzeuge features a fast chip evacuation, as well as an efficient chip breaking property. This is due to the cutting edges in point and chip breakers on leading ...

Diameter : 5 mm - 11.49 mm
Length: 5.5 mm - 23 mm

The VEX-S provides drilling, and front & back chamfering in a single process. The machine utilizes a twist drill functions, and a SNAP chamfering system. As a result, the equipment reduces process time, through conducting ...

Diameter : 0.8 mm - 4 mm
Length: 31.5 mm - 56 mm

Diameter : 1 mm - 20 mm
Length: 32 mm - 104 mm

Diameter : 4 mm - 6 mm
Length: 50, 57 mm

One-piece solid carbide tools developed by LMT particularly for die and mould making exhibit enormous performance. It is primarily the special cutting edge geometries and the coatings developed by LMT that lie at the ...

Stack drilling with LMT Belin One-shot Drills in Sandwich PCD or diamond coated carbide This type of tool is primarily dedicated to aerospace customers. For riveting of CFRP structural components, ...

Diameter : 0.8 mm - 3 mm

LMT Belin Mono-PCD Drills for small diameters There are many potential applications for PCD drills with very small diameters. But not only high Si-Alloys used in Aerospace or precious metals used ...

Diameter : 5, 6, 8, 10 mm
Length: 62 mm - 89 mm

VN4022 Point shape - form E. Material HSS Co5. Very high performance high speed steel with good toughness for milling cutters and for milling of materials up to the strength of 1200 MPa. Lead of helix 25° - 30°. VN40090 Point ...

Diameter : 5, 6, 8, 10 mm
Length: 62 mm - 89 mm

Point shape - form E. Material HSS Co5. Very high performance high speed steel with good toughness for milling cutters and for milling of materials up to the strength of 1200 MPa. Lead of helix 25° - 30°.

Diameter : 3.15 mm - 25 mm
Length: 31 mm - 100 mm

VS9201 P.1 | Free-cutting steels, general construction steels≤ 600 N/mm² P.2 | General construction steels, steel castings≤ 850 N/mm² N.1 | Aluminium, Aluminium cast alloys SiSi ≤ 6% N.4 | Cooper-zinc alloys, cooper-tin alloys≤ ...

Diameter : 3 mm - 50 mm
Length: 50 mm

Tool modification - Sharpening modification according to, DIN 1412 Notes - The sharpening at 180° has two sharp levels in the middle; - Possible shape are: standard, flat, avyac and A, B, C, D, E, and U; - The rake angle b is ...

Diameter : 3 mm - 50 mm
Length: 50 mm

Tool modification - Reduction of the diameter; Notes - The total length and flute length are the same of fhe bigger diameter; - Cylindrical flange back off and sharpening can be white unless coated; Required parameters - Item ...

Diameter : 3 mm - 50 mm
Length: 50 mm

Tool modification - Rear part reduction; Guaranteed tolerances - According to DIN 7168 SG; Required parameters - Item code; - Total length L;

Diameter : 0.1 mm - 20 mm

... cutters, rail cutters and twist drills Karnasch drills offer the optimum price-performance ratio for the machining of almost all materials Karnasch Professional Tools presents a wide range of high ...

Diameter : 4 mm - 60 mm

Karnasch premium step drills, tube drills & sheet drills One of the most comprehensive stock ranges of step drills, tube drills and sheet drills Karnasch ...

Diameter : 11 mm

This pilot drill bit is developed by SML. For its design, it is constructed with a size of 11 mm with a range of 130 up to 100. In addition, the structure of this pilot drill bit is double ...

Diameter : 12 mm

The 130-101 model is manufactured by SML, and is a pilot drill with a diameter of 12 mm that is a double-ended drill, which is utilized for 2-point punches that is made up of stainless steel. It is utilized ...

Diameter : 3.3 mm - 8 mm

This set is consist of a wide range of tools, specifically for drilling holes and for eliminating the surrounding paint in a single operation.

Diameter : 20 mm
Length: 65 mm

... Pipework is capable of drilling a TESEO installation under pressure. Models of the series have easy-to-install outlet plates on the live distribution lines; they feed new machines or pneumatic tools. They also have integrated ...

Diameter : 2 mm - 40 mm
Length: 0 mm - 250 mm

Using of MASAM Standard Drills is to the specific diameters and lengths of the working and clamping parts of the tool that are not offered in common “catalog solutions”. MASAM Standard Drill is design ...

Diameter : 2 mm - 40 mm
Length: 0 mm - 250 mm

MASAM Step Drills are one of the most important product in MASAM special cutting tools production. In the given category, based on our experience and our technical documentation, we offer different versions in the dimensions ...

Diameter : 2 mm - 40 mm
Length: 0 mm - 250 mm

Center Drills MASAM for drilling holes in a variety of tool tip designs based on customer request. The shape of the tool tip is designed to provide the suitable contact area of the next tool in the production ...

Diameter : 12.7 mm
Length: 60 mm

... work for laminated wood flooring, multilayer solid wood engineered flooring, bamboo flooring, solid wood door, etc. Features: Compared with other material of woodworking tools, the PCD router bit ...

Diameter : 0.8 mm - 1.5 mm
Length: 40 mm

... frames and CD disc holders. Features of PCD Router Bit: 1.The diamond router bit features of a sharp cutting edge, high processing precision, good abrasive resistance and long service life. 2.The bit ...

Diameter : 4 mm - 60 mm

Special milling cutters and bits made of high speed steel or whole-carbide or with carbide tips, realized according to sample or drawing for every wood working (for ex. Milling, bordering, moulding, boring, and so on).

Diameter : 3 mm - 20 mm

ASC 320 is a coolant fed solid carbide line available in diameters from 3mm - 20mm and in depths of 3.5xD, 6xD, and 9xD. A unique combination of geometry and coating allows for use in a wide variety of applications. Advantages ...

Solid Carbide Special Capabilities With the acquisition of Superion, Inc., Allied Machine has gained the ability to provide top-of-the-line solid carbide special tooling. Superion has built its reputation ...

PCD Drills Industries: Aerospace, Automotive Wafer Style Wide diameter range of 4mm - 20mm Can be designed with mutliple steps Can be designed with coolant through Solid Head Style Diameter range of ...

Diameter : 5 mm - 10 mm
Length: 28, 40 mm

... HOLE DRILLING BIT Z1 PCD through hole drilling bit with high performance Z1. Suitable for trough hole on laminated chipboard panels MDF. ADDITIONAL INFORMATION TYPE ...

Diameter : 5 mm - 12 mm
Length: 57.5, 70 mm

... HOLE DRILLING BIT Z2 PCD through hole drilling bit with high performance Z2. Suitable for trough hole on laminated chipboard panels MDF. ADDITIONAL INFORMATION TYPE ...

Diameter : 5 mm - 12 mm
Length: 28, 40 mm

... HOLES DRILLING BIT Z2 PCD blind holes drilling bit with high performance Z2. Suitable for drilling on laminated chipboard panels MDF. ADDITIONAL ...