Nominal diameter: 6 mm - 10 mm
Stainless Steel Cage Nuts Our Stainless Steel Cage Nuts, also known as Clip Nuts, are manufactured from high performance ...
Vital Parts ltd
Stainless Steel Domed Hex Nuts DIN 1587 Our Stainless Steel Domed Hex Nuts, also known as Acorn Nuts, are manufactured ...
Vital Parts ltd
Nominal diameter: 4 mm - 24 mm
Stainless Steel Nylon Lock Flange Hex Nut DIN 6926 Our Stainless Steel Nylon Lock Hex Nuts High, also known as High Nyloc Nuts ...
Vital Parts ltd
Self-clinching rivet nuts from series 10.455 and 10.456 are riveted into the component. A shaft is passed through a pre-punched hole in the component and riveted on the opposite side. The base material is not deformed ...
HONSEL-Group
... rivet nut provides a locking device to avoid the turning of the insert in the component. These knurled blind rivet nuts are used preferably in components with lower regidity (component ...
HONSEL-Group
The classic form of blind rivet nuts with parallel shank for use in dry and grease-free components . The availability in aluminum, steel and stainless steel with all ...
HONSEL-Group
Rivet Nuts for automotive Blind rivet nuts and bolts Rivet nuts and studs
Automotive parts Self-Clinching Nuts, Stud and standoffs Clinch & sheet metal fasteners Cage nuts
Stainless steel and plastic self-anchoring threaded sleeve Self-anchoring threaded sleeve with one to four rings and an internal threaded sleeve; with/without head; made of stainless ...
Keep Nut stainless steel AISI 316L Self-anchoring threaded sleeve with one to four rings and an internal threaded sleeve; with/without head; in stainless steel ...
Nominal diameter: 3 mm - 12 mm
The self-crimping cage nut by Ameca is a square or oblong stainless steel indenting device which has an enclosed nut in an elastic metal cage. This permits ...
AMECA
... adjustments. Custom Nuts Nuts are generally made from stainless steel in standard sizes ranging from 0-80” to 3/4-10”. However, our breath of machining capabilities ...
... LOCKING NUTS - NIRO, HEXAGONAL LOCKING NUTS IN STAINLESS STEEL, THIN TYPE, SIMILAR TO ISO 4035 / 8675 (DIN 439 / 936) Manufacturer - NADELLA Standard - ISO 4035 / ...
Nominal diameter: 4, 6, 5, 10, 8 mm
Height: 11.5, 9.5, 18, 15, 23 mm
Width: 30, 25, 32, 20, 16 mm
Thumb Nut - 316 Stainless Steel (WDS 816) (Available) £9.15 - £23.79 Each WDS 816 Type - Thumb Nuts / Material - Stainless Steel MATERIAL ...
WDS Component Parts
Goodridge stainless steel female tube nuts to be used with HL836-03C hardline & AN819-03C tube sleeve
Nominal diameter: 12 mm - 46 mm
Height: 12 mm - 39 mm
... The design of the nuts does not deviate from the sizes of current standard nuts. Therefore, wrench sizes, thread heights etc. all remains the same making it very easy to upgrade and replace standard nuts. ...
Nominal diameter: 12 mm - 46 mm
Height: 10 mm - 40 mm
These accessories are the optimal choice for equipment that must comply with strict hygiene requirements. The seal blocks out water and bacteria and also prevents a non-hygienic metal-to-metal assembly. Self-draining surfaces with ...
Nominal diameter: 4.9 mm - 15.9 mm
Width: 8.5 mm - 30 mm
Blind rivet nuts make it possible to assemble several elements and can then be combined with screws or bolts. Advantages of this product: Robust threading on parts with low thickness or resistance Blind setting ...
Nominal diameter: 3 mm - 10 mm
Height: 9 mm - 21 mm
Blind rivet nuts make it possible to assemble several elements and can then be combined with screws or bolts. Advantages of this product: Robust threading on parts with low thickness or resistance Blind setting ...
Nominal diameter: 3 mm - 10 mm
Height: 9 mm - 29 mm
GOFIX Flat or countersunk head nuts Blind rivet nuts make it possible to assemble several elements and can then be combined with screws or bolts. Advantages of this product: Robust threading ...
Nominal diameter: 2 mm - 6 mm
Height: 1.5 mm - 4.08 mm
Width: 4.8 mm - 9.5 mm
Type BF: Material stainless steel 18/8 (AISI300), passivated, especially suitable for the use of thin aluminum sheets (sheet hardness up to HRB-70). After assembly, not protruding on ...
Nominal diameter: 2.5 mm - 8 mm
Height: 0.8 mm - 1.4 mm
Width: 6.3 mm - 12.65 mm
Material stainless steel, precipitation hardened (martensitic) for use with sheet hardnesses up to HRB-90 We - Stud Welding Technology bsk + BTV GmbH - can also supply you with threaded bolts, pins, ...
Nominal diameter: 2 mm - 10 mm
Height: 0.8 mm - 2.3 mm
Width: 6.3 mm - 16.5 mm
Steel material, strength class 10, galvanized, colorless passivated (code ZI) for use with sheet metal hardnesses up to HRB-80 Type BCLS: Material stainless steel ...
... why we offer all standardized Eye Screws and Ring Nuts upon request with an inspection certificate in accordance with DIN EN 10204-3.1, subject to a charge. Eye nuts DIN 582 - AISI 304, stainless ...
Nominal diameter: 3 mm - 6 mm
Height: 12.8 mm - 29.5 mm
... applied. FEATURES AND BENEFITS These captive nuts are press-fit into a clean round hole on the panel to provide permanent retention of the nut. Panels lay over protruding studs and captive nuts ...
Nominal diameter: 3 mm - 6 mm
Height: 1.49 mm - 4.56 mm
Width: 7.82 mm - 13.26 mm
... hundreds of users of weld nuts, speeds production using standard equipment, thereby reducing labor costs. PEM stainless steel weld nuts offer the added advantage of ...
PENN Engineering
Nominal diameter: 3 mm - 6 mm
Height: 4 mm - 6 mm
Width: 5.5 mm - 10 mm
The 348 series is made of mild and stainless steel with metal or zinc finish. Its main function is for restraining any loose in any of the work pieces. It has a full set of vibration ...
Nominal diameter: 6.35 mm - 9.53 mm
Height: 0.313 in - 9.525 in
Width: 0.44 in - 9.53 in
Nominal diameter: 20 mm - 400 mm
... customized threaded nuts. We can also provide you with a trapezoidal nut as a replacement for a worn out lead screw nut or lifting nut. Custom-made Nuts It ...
Nominal diameter: 6.8 mm - 26.6 mm
Height: 2.4 mm - 10.7 mm
Width: 15.3 mm - 58.3 mm
DIN 314, DIN 315 Wing nuts, american type (edged wings) A2 | A4
Lederer
Nominal diameter: 0.13 in - 2 in
A nut is a type of fastener with a threaded hole. It is used opposite a mating bolt to fasten a stack of parts together. The nut can be specified as male conic threaded and female BSP cylindric threaded ...
Nominal diameter: 8 mm
Height: 6.14 mm
Width: 13 mm
The Stainless Steel Nut 4HU-PF Series is manufactured by FG INOX. The products feature compact and durable designs, easy-to-utilize structural constructions. The M8 model measures 6 mm ...
Nominal diameter: 6.3 mm - 20.55 mm
Height: 1.5 mm - 8.5 mm
Width: 4.2 mm - 16.95 mm
Quick, convenient assembly using standard tools Installation of self-clinching nuts is simple, quick, and convenient. Just insert them in punched or drilled holes, then apply a squeezing force to embed ...
Shenzhen In-saiL Precision Parts Co.,Ltd
High-quality heavy-hex nut. Available in steel with thread sizes from 1/4-20 to 1-1/4"-7 (M6 to M30 in metric), and in stainless steel with thread sizes from 1/4-20 to ...
Nominal diameter: 3 mm - 12 mm
Height: 10 mm - 30 mm
... and chemical industries, HPC Gears has expanded its range of stainless-steel components. All of the products in the Hygienic Design® and Hygienic Usit® ranges are made from stainless ...
Please specify:
Help us improve:
remaining