Input voltage: 18 V - 30 V
Current: 3 mA
... EPLAN Macros are available for simple integration into the control cabinet. Input voltage - +24 V DC (+18-30 V DC) Input current - 3 mA at +24 V DC Input delay - typically 0.1 ms Configuration - potential-free ...
Input voltage: 8 V - 48 V
Current: 3.5, 6.5 A
... The VLCI-CAN-07 is a CANopen servo drive that is based on SMAC’s VLC, which is a 1-axis integrated controller/driver and an additional layer that provides the CANopen connectivity. ...
... at greatest convenience for scanning stages, measuring stages and micromanipulators. According to the application, the controllers are available in different variations. ...
Märzhäuser Wetzlar
Input voltage: 24 V - 230 V
Current: 1.4 A - 8.5 A
... to control stepper motors with less noise, less overheating, a smooth motion and the highest performances at high speed in comparison with most drives available on the market. Designed for the control of 2 or 4 phase ...
Ever Elettronica
Input voltage: 12 V - 48 V
Current: 0.6, 2.6 A
... The PCM4806E and PCM4826E IDEATM Drive Stepper Motor Controllers use USB for communication and are available in two current ratings. In addition to the stand-alone models, drives are ...
Haydon Kerk Pittman
Input voltage: 24, 12, 48, 36 V
Current: 40 A - 240 A
... This AC motor controller uses dual high performance ARM Cortex microprocessors in a compact, package to deliver unmatched performance and a very flexible feature set. Model AC F2-A is optimized for use as a traction controller ...
Curtis Instruments
Current: 0.3 A - 3 A
... The Series R325P is a 2-phase stepper motor driver developed by Lin Engineering. It is supplied with +12 to 48 VDC power supply, 0.3 to 3.0 Amps Peak phase current, and full to 256 microstepping resolutions. The unit ...
Output voltage: 12 V - 24 V
Current: 3 A
... Motor controller for small stepper and BLDC motors. Due to its small size (40 x 60 mm), this housing-free board is ideally suited for integration into devices such as those used for laboratory ...
Nanotec Electronic GmbH & Co. KG
... Descriptions The DM2722 is full digital 2 phase stepper driver based on DSP control. The drive voltage of which is from 110V to 230VAC. It is designed for use with the 2 phase hybrid stepper motor ...
... The PMX-4EX-SA model is manufactured by Arcus Technology, and is a 4-axis controller which has a USB 2.0 and RS-485 communication. It has a 6M maximum pulse rate with available acceleration in either trapezoidal or s-curve. There is ...
Arcus Technology
... EM-314 is a bipolar-chopper type microstepping steppermotor controller. The bipolar operation principle suits most stepper motors and provides the best torque. The microstepping function also enables ...
Input voltage: 18 V - 36 V
Current: 2 A
... Weight 0.10 Kg IP IP20 Temperature range 0 - 50 °C ...
Input voltage: 12 V - 36 V
Current: 2, 4.2, 4 A
... SmartStep belongs to the latest generation of stepper motors' controls. Both, control and power parts are integrated in only one platine. As a one channel control it can be plugged directly to a stepper ...
MICROSTEP GmbH
... axis driver for use with Piezo LEGS motors from PiezoMotor. It is one of the more advanced drivers in the product range giving the Piezo LEGS motors resolution down in the nanometer/microradian range. Driving the motors ...
... The NSC-A1 Series motion controller is a powerful single axis stepper motor control system which combines a microstepping driver with a programmable controller into a ...
Newmark Systems Inc
... The IMC4 by Imes-Icore GmbH is a 4-axis stepper motor driver which functions as a firmly mounted plate that is located in machine rear wall. It features its easy to operate machine cutting of different materials such ...
... current driver board designed for 2-phase unipolar stepper motors. The board is able to drive unipolar stepper motors with bifilar coil windings. To prevent heat generation ...
... of applications. The MCU serves as link between the PC and the linear x-ray camera, and also controls a stepper motor. The stepper motor drives a linear sliding table to manipulate ...
Input voltage: 12 V - 48 V
Current: 5, 2.5 A
... EtherCAT modules with dual/quad-axis universal drives for servo, step, and voice coil motors with a continuous power range of 10W to 100W (200W peak). The type of motor is selected by the user and can be set differently ...
... Thorlabs offers stepper motor controls in T-Cube (mini benchtop), benchtop, and rack versions. ...
Input voltage: 12 V - 24 V
Current: 2 A
... flexible stepper motor controller, programmable using the ZDA software. The controller operates up to 2A and 24V and all key parameters can be set using the freely available software. The ...
Output voltage: 24 V - 60 V
Current: 10 A
... V to +36 V DC Motor voltage: +24 V to +60 V DC Max. Phase current: optionally adjustable up to 5 A or 10 A Temperature range: -10° C to +50°C without forced ventilation Current reduction: adjustable Inputs: ...
Gunda Automation GmbH
Output voltage: 3.3 V - 50 V
Current: 1.4 A
... The A4980 is a flexible microstepping motor driver with built-in translator for easy operation. It is a single-chip solution, designed to operate bipolar stepper motors in full-, half-, quarter- and sixteenth-step ...
Input voltage: 5 V
Output voltage: 5 V - 60 V
... Precise motor position reading and controlling controller ...
the best suppliers