Supports

... The Clamp Holder provides the optimum hold for all grounding clamps and ensures tidy storage so that the grounding clamps are not lying on the floor. It is mounted using simple M6 screws. ...

... inspection. The IG rupture disc holder features an inclined seat and is designed for forward acting rupture discs. The 30° oblique seating arrangement creates the optimum seal for the rupture disc ensuring leak tight integrity. The holder ...

... rupture disc holder outlet performs a support function and guarantees the optimal opening behaviour when the defined burst pressure is reached. The integrated pre-assembly bolts allow an easy and safe installation of ...

... , and OHB outdoor display series, the Armagard flat wall bracket is a secure and durable solution for mounting OH digital signage displays. Available in 24”, 46”, 55”, and 75” sizes, it supports both landscape and portrait ...

... Adjustable brackets for various suspension rods are available in a variety of sizes to fit most crossarms. These brackets fit steel tubing sizes 1 1/4″, 1 1/2″, 1 3/4″ and 2″. ...

... Description
Pultruded GRP overhead hanger in C‑profile for suspended support applications. Available in lengths 200, 300, 400 and 500 mm. Finish: pebble grey (RAL 7032).

Technical table
Material: GRP (Glass‑fibre ...

... Description
GRP overhead hanger with double C-profile. Pultruded glass-fibre reinforced polyester (GFRP). Available lengths: 200 mm, 300 mm, 400 mm and 500 mm. Finish RAL 7032 (pebble grey). Designed for overhead suspension applications in industrial ...

... Description
Overhead hanger, U-profile HU 5050, profile section 50×50 mm, lengths from 205 mm to 2005 mm (standard variants), steel, hot dip galvanised according to DIN EN ISO 1461.

Material / Color

• Material: Steel
• Surface

The kit consists of a brass mounting base with fixing screws for the air rod (for flat conductor) or a copper collar placed at the base of the air rod (for round conductors).

The pivoting saddle allows the pointed air rods and conductors to be fixed on a non-horizontal

... Tube supports CM of die-cast aluminum have a split clamping point with round or square cross-section that has been partially machined by cutting methods. The bore at the clamping point is arranged in the plane parallel to the flange ...

... Torque supports VZDR are used together with round single tube linear units. They prevent the turning of clamping plates VZK and position indicators VZPM or VZPE attached as accessories. The torque supports are made ...

... Torque supports VZDV are used together with square single tube linear units. They prevent the turning of clamping plates VZK and position indicators VZPM or VZPE attached as accessories. The torque supports are made ...

... Stand for Belt Conveyors 40 and 50. Material • clear anodized aluminum • galvanized GD-Zn • rubber Scope of Delivery stand segment fully assembled and attached to belt conveyor if applicable Standard Conveyor ...

... Modular Automation System. Application Stand for Belt Conveyor 80 and Modular Belt Conveyor 80. Material clear anodized aluminum galvanized GD-Zn galvanized steel rubber Scope of Delivery stand segment fully ...

... Standard Conveyor Stand type S Leveling Bases BAS1120 (Height adjustment ± 30 mm) Standard Conveyor Stand type S Swivel Castors CAS3080 with brake Construction Conveying height = stand height ...

... The RPH-1 is to be used with our standard reflection probes, which are 6.5mm in diameter. The holder enables positioning of the probe tip in two angles: 45 degrees for diffuse reflection measurements and 90 degrees (normal to sample) ...

... separate fibres for illumination and detection. All 11 holes have a diameter of 1.6mm and are equipped with a setscrew to mount the probes or fibres into position. The AFH-15 is made of black anodized aluminium. ...

... Universal mobile support for all types of welding machines This mobile stand, with a height of 2.40 m and a reach of 2.50 m, is designed to meet the needs of the largest workshops and the largest equipment. Its robust structure ensures ...

... Horizontal support for lightning rods Support base plate for fastening simples lightning rods to flat surfaces. Base made of: Cu / Zn Copper alloy, stainless steel and copper. (See other manufacturing materials). ...

... Concrete supports Concrete support for fixation of 1m-3m lightning rods in horizontal roofs. • Made in concrete. • The 6.9Kg model has protective case in order to avoid making damages in structure. • Easy installation. ...

... BASE PLATE HOLDER FOR FIXING CONNECTOR TIPS ON FLAT, VERTICAL, OR INCLINED SURFACES. Base material: Brass. • Its installation is indicated for the fixing of lightning rods up to 500 mm in length and 16mm or 20mm in Ø, on roofs or ...

... Product overview
LM01 is a spring-loaded leveling mount designed to provide automatic leveling for solar radiation sensors and similar field instruments. It enables correct sensor alignment on uneven installations and simplifies ...

... The WRB roller stands are heavy-duty supports for pipe handling, designed to roll or turn pipes during manipulation operations. They are available in multiple models covering a wide pipe diameter range and offer configurable functionality ...

... Thanks this system the stands can be used for rolling or turning the pipe. In addition, we have the WRB-E roller support beam support new in our range, it is simply placed on the flange of the beam and clamped with ...

... duct on the rear column. The light grey coated work surface (0.3 m2) can be adjusted by hand easily thanks to the tie rod support. A spring-loaded locking bolt provides reliable latching. The height adjustment stroke is 400 millimetres. ...

... Maximum stability and flexible alignment for loads of up to 60 kg – the RK stand system, which now forms part of the RK Rose+Krieger standard range, offers it all! As a specialist for linear, profile, assembly connecting and modular technology, ...

... and the fitting dimensions of the devices. Often users make do with complicated self-made or office solutions, or oversized support arm systems. These solutions prove inadequate in the industrial environment in the long term or may be ...

... This type of bracket is suitable for lighter loads (max 400 kg). The inclusion of two ball race rings and the direct contact between the plate and the ball race ring by means of the king pin, guarantee maximum maneuverability and a marked ...

... This type of bracket is suitable for medium loads (max 500 kg). The inclusion of two ball race rings and the direct contact between the plate and the ball race ring by means of the king pin, guarantee maximum maneuverability and a marked ...

This model offers increased load capacity making it suitable for industrrial applications (max 750 kg). Galvaninzing with yellow chromates guarantees a high level of resistance to white salt corrosion, with a resistance of more than 72 hours to salt spray. ...

... Material: PVC Colour: transparent In 6 sizes: for wires and cables of Ø 1,1 to 30 mm. 4 lengths: 3, 6, 8 and10 standard markers type 150, or 4, 8, 11 and 14 narrow markers type 200 In strips of 0,60 m for cutting to required length. ...

... Material: PVC Colour: transparent In 6 sizes for wires and cables of Ø 1,5 to 30 mm. 4 lengths: 3, 6, 8 and 10 standard markers type 150, or 4, 8, 11 and 14 narrow markers type 200 In strips of 0,60 m for cutting to required length. ...

... "PR" transparent carriers Three sizes: for Ø 1 to 9 mm Material: EVA halogen free (- 10 to + 65°C) Colour: clear With marker holder: For wires and cables of Ø 1 to 9. In 3 sizes: 1 of them in 2 lengths. For 6 to 7 standard markers for type 150 or ...

... Particular characteristic(s) - 360° articulated arm Included in delivery - Measuring instrument not included Measuring force [N] - 140 - Weight [g] - 197 - Weight [lb(s - 0,4343 ...

... Function(s) - Disengageable of magnet possible Included in delivery - Measuring instrument not included Dimensions - 294 x 270 - Measuring force [N] - 600 - Weight [g] - 2205 - Weight [lb(s - 4,8612 - Fine adjustment - With ...

... Included in delivery - Measuring instrument not included Measuring force [N] - 350 - Weight [g] - 946 - Weight - 0,93 - Weight [lb(s - 2,0856 Measuring force [N] - 220 - Weight [g] - 490 - Weight - 0,47 - Weight [lb(s - 1,0803 ...

... The TS1300 is a table stand that can be used with crimp heads DV1300C2 or V1300C2-AL. The table stand is designed for operators with high frequency use of the C2 crimp head. With the table stand you get ...

... blasted finish. • Finish: Painted / Zinc Plated / Sandblasted • Types: Section U and Section L. It is a station for the support of the belt on the return side where the roll arrangement is horizontal. Suitable for small and medium ...

... Bus bar connectors Material: St37K, zinc- and chrome plated ...

... Terminal supports for earth and neutral bus-bars Terminal supportsfor earth and neutral bus-barsTerminal support with movablesocket top for bars from 6x6up to 10x2 or 15x4 mm. ...

... Terminal supports for earth and neutral bus-bars 9 x 6.5 mm ...

... DonadonSDD disc holders are designed in order to ensure maximum reliability to DonadonSDD rupture discs. Disc holders designed to be mounted between flanges such as HI/A and HR/A have: an internal diameter sized ...

... DonadonSDD disc holders are designed in order to ensure maximum reliability to DonadonSDD rupture discs. HI/F and HR/F flanged disc holders, previous code AZ-60, have been designed to be fitted directly on the piping. They are composed ...

... DonadonSDD disc holders are designed in order to ensure maximum reliability to DonadonSDD rupture discs. HI/P and HR/P pre-tightened disc holders offer the following advantages: Easy to install even where access ...

... as ceramic insulator components, ceramic collars, ceramic square frames, ceramic saddles; ceramic rods, ceramic filament supports, ceramic orifice plates, ceramic heater and so on. QMS Quadrupole mass spectrometry is widely used ...

... Hygienic side guide bracket in stainless steel 304 (Aisi 1.4301) HSG side guide bracket with nut, eyebolt and washer in stainless steel AISI 304 (Aisi 1.4301). Side guide in hygienic stainless steel design All ...

... Hygienic swivel side guide bracket in stainless steel 304 (Aisi 1.4301) HSG-SW side guide bracket with nut, eyebolt and washer in stainless steel AISI 304 (Aisi 1.4301). Hygienic swivel side guide in hygienic stainless ...

... Side guide bracket in stainless steel 304 (Aisi 1.4301) SG side guide bracket with star knob in polyamide with brass insert with eyebolt and washer in stainless steel AISI 304 (Aisi 1.4301). Side guide in hygienic ...

... Product overview
This aluminum laser mount is designed to position and secure laser modules with an inner mounting diameter of ∅25.15 mm. It provides effective heat dissipation and precise mechanical adjustment for industrial ...

... aluminum mount is intended for positioning lasers with a diameter Ø20 mm. It is a wall-mount solution for CNC stone-cutting machines and provides thermal dissipation and mechanical resistance for industrial applications. The CV-20 laser ...

... Product description
This aluminum mount is designed to position laser modules with an M18x1 thread. It provides effective heat dissipation and is suitable for wall mounting or integration on CNC machines used for stone cutting. ...

... These cylindrical supports provide high load capacities and fasten with a mounting screw through the bottom for low profile. Ideal for preventing the workpiece from chattering and deflecting. The positive locking mechanism allows the ...

... These mini work supports allow you to provide proper workpiece support. The spring loaded plunger retracts into the body of the support when the workpiece is put in place. The plunger can then be locked ...

... This extendable work support allows for easy adjustment with the hand knob. Turning the knob clockwise pushes the work support upward, counter-clockwise moves it downward. A custom spindle can be adapted to the clamp ...

... Material - Profile type - Weight (Kg) black painted steel - 45x90 mm - 3,924 ...

... Material - Profile type - Weight (Kg) black painted steel - 45x90 mm - 5,907 ...

... Material - Profile type - Weight (Kg) sandblasted die-cast aluminium - 45x45 mm - 0,519 ...