Supports

Support bases GN 6470 are used in combination with boiler or threaded tubes to build transport systems or work tables. Threads (M16) are provided on the bottom to accommodate adjustment or leveling feet.

Side guide brackets GN 6476 fasten side guides or side guide segments to conveyor sections. This also requires the use of connecting elements GN 6473.2, retaining profiles GN 6473.1 or side guide clamps GN 6475.3, GN ...

Complete line-up of self-tensioning motor mounts for belt drives. Ideal motor base solution for existing applications with V-Belt drives. The Tensys® rubber elements provide continuous compensation for pretensioning ...

Four models to change distance between the motor and driven shaft Sliding “SMB” Type – extremely low profile, strong, and lightweight Sliding Cast Iron Type – original Lovejoy design, durable cast iron and steel Sliding Dovetail Type ...

... technopolymer, RAL 7015 grey colour, matte finish. Closed cap for head bracket or for pass-through shafts. STANDARD EXECUTIONS - UCF-T: head bracket with closed cover. - UCF-P: bracket ...

... technopolymer, RAL 7015 grey colour, matte finish. Closed cap for head bracket or for pass-through shafts. STANDARD EXECUTIONS - UCFL-T: head bracket with closed cap. - UCFL-P: bracket ...

Support workpiece by knob adjustable locking pin. Attaching an extension spindle allows adjusting workpiece height with ease. Support capacity : 8000 - 18500N Lifting force : 700 - 900 N Body ...

Sensor holders Manufacturer: Gimatic 10TYPES AVAILABLE Sensor holder for MFD 27, with screw

Adjustable brackets for various suspension rods are available in a variety of sizes to fit most crossarms. These brackets fit steel tubing sizes 1 1/4″, 1 1/2″, 1 3/4″ and 2″.

... supportive backing makes it easy to mount your display on any flat wall. The bracket can be placed in a landscape or portrait orientation, depending on your requirements. Complete with a black powder ...

The RPH-1 is to be used with our standard reflection probes, which are 6.5mm in diameter. The holder enables positioning of the probe tip in two angles: 45 degrees for diffuse reflection measurements and 90 degrees (normal ...

... separate fibres for illumination and detection. All 11 holes have a diameter of 1.6mm and are equipped with a setscrew to mount the probes or fibres into position. The AFH-15 is made of black anodized aluminium.

... challenging but the AFH-Ocular makes the job easier. The ocular enables visual location of the measurement spot on your sample. The holder is used in conjunction with our miniaturized reflection probe (FCR-7UVIR100-2-1×25) ...

... photocells or sensors suitable for applications exposed to accidental impact. State of supply n.1 flange connector, n.1 sensor holder connector, n.1 aluminium alloy UNI 5076 cross connector; n.1 TCEI M6x16 screw, ...

Use: machine control panel support. Possibility to run cables through the tube Kit ready for installation. State of supply 2 angle connectors, 2 aluminium swivel supports, stainless steel tubes, galvanised ...

Use: machine control panel support. Possibility to run cables through the tube Kit ready for installation. State of supply 2 pedestal connectors, 1 angle connector, 1 AISI 304 steel tube segment, galvanised steel nuts and bolts.

This type of bracket is suitable for lighter loads (max 400 kg). The inclusion of two ball race rings and the direct contact between the plate and the ball race ring by means of the king pin, guarantee maximum maneuverability ...

This type of bracket is suitable for medium loads (max 500 kg). The inclusion of two ball race rings and the direct contact between the plate and the ball race ring by means of the king pin, guarantee maximum maneuverability ...

This model offers increased load capacity making it suitable for industrrial applications (max 750 kg). Galvaninzing with yellow chromates guarantees a high level of resistance to white salt corrosion, with a resistance of more than 72 ...

Antenna extension Design: Antenna extension with magnetic base for better positioning of the antenna and for optimum transmission and reception power. Connection cable: 1.5 metres Connector: straight Application: The antenna ...

DonadonSDD disc holders are designed in order to ensure maximum reliability to DonadonSDD rupture discs. Disc holders designed to be mounted between flanges such as HI/A and HR/A have: an internal ...

DonadonSDD disc holders are designed in order to ensure maximum reliability to DonadonSDD rupture discs. HI/F and HR/F flanged disc holders, previous code AZ-60, have been designed to be fitted directly on the piping. ...

DonadonSDD disc holders are designed in order to ensure maximum reliability to DonadonSDD rupture discs. HI/P and HR/P pre-tightened disc holders offer the following advantages: Easy to install ...

• It can be placed inside deep and inaccessible cylindrical cavity • It can be adjusted at a distance. • Each punch can be adjusted independently ,therefore making it easy to do the centering on surfaces that are not perfectly circular. ...

• It can be placed inside deep and inaccessible cylindrical cavity • It can be adjusted at a distance. • Each punch can be adjusted independently ,therefore making it easy to do the centering on surfaces that are not perfectly circular. ...

Conductor holder for flat roofs where it is not possible to drill in order to secure the conductor, such as bitumen roofs. To be filled with cement. The lip at the bottom of the cone allows it to be embedded in ...

The Clamp Holder provides the optimum hold for all grounding clamps and ensures tidy storage so that the grounding clamps are not lying on the floor. It is mounted using simple M6 screws.

... inspection. The IG rupture disc holder features an inclined seat and is designed for forward acting rupture discs. The 30° oblique seating arrangement creates the optimum seal for the rupture disc ensuring leak tight ...

... rupture disc holder outlet performs a support function and guarantees the optimal opening behaviour when the defined burst pressure is reached. The integrated pre-assembly bolts allow an easy and safe ...

The pivoting saddle allows the pointed air rods and conductors to be fixed on a non-horizontal

The kit consists of a brass mounting base with fixing screws for the air rod (for flat conductor) or a copper collar placed at the base of the air rod (for round

... duct on the rear column. The light grey coated work surface (0.3 m2) can be adjusted by hand easily thanks to the tie rod support. A spring-loaded locking bolt provides reliable latching. The height adjustment stroke ...

Maximum stability and flexible alignment for loads of up to 60 kg – the RK stand system, which now forms part of the RK Rose+Krieger standard range, offers it all! As a specialist for linear, profile, assembly connecting ...

... and the fitting dimensions of the devices. Often users make do with complicated self-made or office solutions, or oversized support arm systems. These solutions prove inadequate in the industrial environment in the long ...

Particular characteristic(s) - 360° articulated arm Included in delivery - Measuring instrument not included Measuring force [N] - 140 - Weight [g] - 197 - Weight [lb(s - 0,4343

Function(s) - Disengageable of magnet possible Included in delivery - Measuring instrument not included Dimensions - 294 x 270 - Measuring force [N] - 600 - Weight [g] - 2205 - Weight [lb(s - 4,8612 - Fine adjustment - With

Included in delivery - Measuring instrument not included Measuring force [N] - 350 - Weight [g] - 946 - Weight - 0,93 - Weight [lb(s - 2,0856 Measuring force [N] - 220 - Weight [g] - 490 - Weight - 0,47 - Weight [lb(s - 1,0803

Support system for standard applications: FP AP Glass fibre reinforced polyester, 0% halogen Brackets for wall-mounting or mounting on or suspending from rails Widths 100 to 950 mm Reinforcement ...

Monobloc support system: FP AM Glass fibre reinforced polyester, 0% halogen Widths 100, 150, 200 and 300 mm Rail centring ribs Endcap

Support system for compact footprints: FP IP Glass fibre reinforced polyester, 0% halogen Small footprint Recommended where space is small Suitable for irregular walls Optimum use for low-width cable trays Widths ...

For installation of enclosures, PCB and other parts onto a DIN rail. Robust metallic material allows rigid mounting on DIN rails. Simple installation and removal via the pull lever. Max load : 10kg 【Materials】 Base, Lever : Plated ...

Mounting base for installation of enclosures, PCB and other parts onto 35mm DIN-rail. Easy mounting and dismounting from a DIN-rail using the pull lever. Replacement product for the discontinued DRA series. Max load : 5㎏ Materials ...

■ Plastic wall mounting bracket. Easy attachment and removal. ■ Large and small brackets are available. ■ Applicable not only for the PF series, but also other plastic/metal enclosures with a panel thickness of 0.8 ...

... machine supports, which can be easily and precisely adjusted. These support bases allow angular differences of up to 4° between machinery and mounting base, without costly base modifications of lengthy ...

Made from premium stainless steel, this bracket resists rust and corrosion for lasting durability in both indoor and outdoor settings. Its sleek, modern design makes it perfect for supporting shelves, securing furniture, ...

Easy install short arm 360 degrees display side-to-side rotation Easy to install with the perfect desk stand Superior flexibility and movement Tilting up and down directions: 30 degrees Save ...

Easy to install with the perfect desk stand Superior flexibility and movement Tilting up and down directions: 90 degrees With cable arrangement space Mechanical & Environmental Loading ...

Easy to install with the perfect desk stand Superior flexibility and movement Tilting up and down directions: 90 degrees With cable arrangement space Mechanical & Environmental Loading ...

... mount. It offers a completely enclosed target for simple mounting of motion sensors. It is a 3-in-1 target/bracket/guard. The mount is suitable for all standard inductive sensors of cylindrical or DIN style. These include ...

Magnetic Mounting Device for Sensors. Magnetic connector that screws onto the Whirligig and magnetically couples it to the shaft being monitored. The Mag-Con is made from stainless steel, has a holding force of over 150 lbs. and can ...