Torque couplings

Torque: 160 Nm - 10,300 Nm
Rotational speed: 1,700 rpm - 5,000 rpm

... :from -30 to +80 °C Product description: Torque is transmitted via elastic coupling sets, that are in evenly placed pockets around the periphery of coupling part 1 type A The corresponding cams of ...

Torque: 1.28 Nm - 33.5 Nm
Rotational speed: 4,000 rpm - 14,000 rpm

... displacement values are dependent on the RPM and power output. Careful alignment of the shafts increases the service life of the coupling. max. misalignment axial: ± 3,4 mm max. misalignment radial: ± 0,5 mm max. misalignment angular: ...

Torque: 70 Nm - 515 Nm

... main function of a rigid shaft coupling is the safe and backlash-free connection of two shaft ends by means of frictional engagement. For example, between an input and output shaft and mainly for transmitting torque. ...

Torque: 2 Nm - 1,050 Nm
Rotational speed: 0 rpm - 34,100 rpm

... General-purpose Coupling of Simple Construction Motive power is transmitted by polyurethane elastomer with the elastic force of rubber. These not only excel in absorbing vibration and shock, they transmit more than double the torque ...

Torque: 10 Nm - 600 Nm
Rotational speed: 9,500 rpm - 12,000 rpm

... Torques 10–600 Nm Properties 4-corrugation bellows rolled in mounting friendly clamp system plug-in design Applications/Specific features backlash-free shaft-/shaft-connections inoperative mounting possible high torsional stiffness • ...

Torque: 2.5 Nm - 900 Nm

... The BAUMANN Flex couplings are temperature resistant from -40°C to +100°C in the standard version. For special applications couplings for temperatures up to + 300°C are also available. The standard range includes couplings ...

Torque: 195 Nm - 40,050 Nm

... brake torque to be maintained when the motor is disengaged Vast selection of coupling sizes and brake disc diameters OPTIONS Coupling hubs finish bored and keywayed acc. to DIN 6885 Coupling ...

Torque: 0.06 Nm - 220 Nm
Rotational speed: 44,000, 26,000, 22,000, 18,000, 13,000 rpm

... Transmitting Torque Through Air Magnetic couplings offer a non-contact transfer of torque. They are typically used in magnetic drive pumps and magnetic mixers for seal-less applications; keeping corrosive, ...

... Weasler jaw couplings dampen system vibrations and adjust misalignment while transmitting torque in motion control applications, protecting other PTO driveshaft components from damage. Complete jaw couplers are available ...

Torque: 35 Nm - 13,500 Nm
Rotational speed: 1,000 rpm - 5,000 rpm

... . Free from backlash, it is the appropriated coupling to absorb torque peaks and dampen vibrations, due to its quick smoothing qualities. One of the most interesting features of the Uneflex shaft coupling ...

... They are suitable as torsionally rigid shaft connections for a positive torque transmission and provide compensation for axial, radial, and angular shaft misalignments. Gear couplings are truly all-purpose and are used ...

Torque: 49, 68, 1,996, 350 Nm
Rotational speed: 1,800, 2,500, 3,000 rpm

... Schmidt coupling A compact, torsionally stiff high-performance coupling for a large, variable radial offset, transmit shafts over a wide range while rotating. Main specification: High torsional stiffness Absorbs ...

Torque: 0.6 Nm - 25 Nm
Rotational speed: 10,000 rpm

... torque transmission is free of backlash and torsionally stiff special solutions on request wear-free and maintenance-free high misalignment values high strength and bending elasticy stainless steel disc pack ...

Torque: 4,600 Nm - 44,300 Nm

... Assembly MAV 4061 L is ideally designed to provide an excellent quality performance. It is built with a high capacitative torque unit with a self-locking and sel-centering capability. It also has zero axial fixation of hub in the event ...

... SIDES - SAFETY LOCKING WITH FRONT TEETH CONNECTION - PART WITH HEAT TREATMENTS TO AVOID WEAR DESIGNED TO TRANSMIT THE TORQUE VALUES OF OUR CARDAN SHAFTS ...

Torque: 283,591 Nm

... The Rexnord Thomas XTSR52 spacer disc coupling is a general purpose high-speed, high- torque coupling used where minimum coupling weight is desirable. The Thomas XTSR52 couplings ...

Torque: 112,984 Nm

... Amerigear Flexible Couplings with Fully-Crowned Gear Teeth offer operational benefits of maximum load-carrying capacity with minimum size, maximum reliability and long life. Product Features Over 10" diameter bore capacity Highest ...

Torque: 21.1 Nm - 265 Nm
Rotational speed: 1,500, 100, 3,000 rpm

... where disconnection of drive and driven units is require like compressors, generators, blowers etc. 3.Simple design. 4.Rated torque range: 21.10nm - 265nm. 5.Torsional Stiffness range: 275 - 4584 nm/Radian 6.KW Rating at 100 RPM range: ...

Torque: 16 Nm

... combinable with multiple coupling systems (KDS) combinable with electrical slip rings as a special design standard designs and special designs available Important operating instruction: For the operating circumstances, ...

Torque: 2.3 Nm
Rotational speed: 12,000 rpm

... where the coupling may need to withstand high torsion stiffness and/or a low mass moment of inertia. These couplings also behave well with axial, radial and angular displacements because of their flexible design Coupling ...

Torque: 0.032 Nm - 7.2 Nm

... High-gain flexible coupling. Single-piece construction with the two aluminium hubs molded with vibration-absorbing rubber. Standard type (XGT2), long type (XGL2) and short type (XGS2). Coupling for servomotors and ...

... design; high torque-resistant polyurethane material; completely error-free motion and power transfer General Features 6, 8 or 10 mm different hole diameter options 20 mm body (intermediate element) diameter 30 mm body length High ...

... Screwed Coupling Set with Lifter • This is the coupling set produced from steel product in order to couple the work piece or apparatuses on the table in a rapid and safe way. ...