Flow: 48, 40 m³/h
Pressure: 16 bar
Head: 135 m
... Two-stage vertical centrifugal pump The pump is a two-stage vertical centrifugal pump equipped with stainless steel shaft, mechanical shaft seal, and closed impeller. Applications: • ...
DESMI Pumping Technology A/S
Flow: 2,000, 2,400 m³/h
Pressure: 25 bar
Head: 195 m
... Applications Within the marine industry the pumps are suitable as: • Fresh and seawater cooling pumps • Bilge and ballast pumps • Fire-fighting • General service pumps • Transport ...
DESMI Pumping Technology A/S
Flow: 0 m³/h - 7,400 m³/h
Pressure: 25 bar
Head: 140 m
... The in-line DSL double suction centrifugal pump Up to 5400 m³/h (23800 US gpm) The DSL pumps are single-stage, double-suction, vertical, centrifugal pumps. The design of the suction ...
DESMI Pumping Technology A/S
Flow: 0.06 l/min - 1 l/min
Pressure: 0 bar - 60 bar
... Gear pump Medium: oil Drive: electric Type: vertical ...
Flow: 2.8 l/min - 38.3 l/min
Pressure: 0 bar - 185 bar
... Gear pump Medium: oil Drive: electric Type: vertical ...
Flow: 0.8 l/min - 13.1 l/min
Pressure: 0 bar - 240 bar
... Gear pump Medium: oil Drive: electric Type: vertical ...
Flow: 2,300, 1,700 m³/h
Head: 97, 120 m
Power: 400, 500 kW
... PUMPS FOR HIGH FLOW RATES Single-stage end-suction centrifugal pump, body with dimensions meeting and exceeding EN 733. Ideal for applications where very high flow rates are required, such as irrigation systems, for ...
SAER
Flow: 1,020, 850 m³/h
Head: 642, 627 m
Power: 900, 710 kW
... MULTI-STAGE HORIZONTAL PUMPS One of the most complete product ranges in the sector, with over 160 different versions available. TM (end-suction), TMB (double support and side suction). For applications requiring particularly high pressure, ...
SAER
Flow: 0 m³/h - 110 m³/h
Head: 394, 385 m
Power: 0 kW - 55 kW
... MULTI-STAGE VERTICAL PUMPS Multi-stage vertical electric pumps, non-self priming, compact to minimise footprint, suitable for lifting stations with or without autoclave, ...
SAER
... The Simaco VP-220 is an ultra-compact vertical peripheral pump for submersible and immersible use, suitable for clear waters, oils and non‑aggressive dilutions without abrasive solids. Available in single-phase and three-phase ...
Flow: 0 l/min - 80 l/min
Pressure: 1 bar - 7 bar
Head: 0 m - 70 m
... VP Vertical regenerative turbine electric pumps Hydraulic Performace Brass single stage vertical electric pumps with submerged regenerative impeller, ideal for maintaining the working ...
Flow: 900 l/min
Head: 12, 27, 40 m
Power: 5 kW - 12.6 kW
... Immersion Pumps are plain centrifugal pumps with the impeller fitted on the driving shaft extension. They are mounted on top of the container, the pump extension being immersed in the coolant. The ...
Brinkmann Pumpen
Flow: 0 l/min - 870 l/min
Head: 0 m - 62 m
Power: 3.3 kW - 10.3 kW
... Horizontal End-Suction Pumps are centrifugal inline pumps with a compact design where the impeller is mounted onto the extended motor shaft. These pumps are not self-priming and ...
Brinkmann Pumpen
Flow: 160 l/min
Head: 8 m - 37 m
Power: 0.63 kW - 3.8 kW
... Immersion Pumps are plain centrifugal pumps with the impeller fitted on the driving shaft extension. They are mounted on top of the container, the pump extension being immersed in the coolant. The ...
Brinkmann Pumpen
Pressure: 10, 30 bar
... ViscoTec dispenser 3VMP18, as a volumetric dispensing pump for larger volumes, ensures smooth and reliable product supplying of abrasive, high-filled or shear sensitive material - with a repeatability of +/- 1 %! Absolutely precise, ...
Flow: 0.033 l/min - 66.4 l/min
Pressure: 1 bar - 20 bar
... ViscoTec dosing and filling pump type RD-hygienic for food and cosmetics is a volumetric conveying pump based on the endless piston principle. Suitable for discontinuous or continuous pulsation-free metering of viscous, ...
Flow: 6 m³/h
Head: 8 m
Power: 0.55, 0.75, 0.37 kW
... the correct size of a centrifugal pump it is of fundamental importance to know the actual working point of the system, therefore the flow rate (Q) [m3/h] and the head (H) [m.c.l. or m] required, to identify the pump ...
FLUIMAC
Flow: 0 m³/h - 10 m³/h
Head: 0 m - 10 m
Power: 0.75, 1.1, 0.55 kW
... the correct size of a centrifugal pump it is of fundamental importance to know the actual working point of the system, therefore the flow rate (Q) [m3/h] and the head (H) [m.c.l. or m] required, to identify the pump ...
FLUIMAC
Flow: 0 m³/h - 15 m³/h
Head: 0 m - 12 m
Power: 1.1, 0.75, 1.5 kW
... the correct size of a centrifugal pump it is of fundamental importance to know the actual working point of the system, therefore the flow rate (Q) [m3/h] and the head (H) [m.c.l. or m] required, to identify the pump ...
FLUIMAC
Flow: 0 m³/h - 15.6 m³/h
Head: 0 m - 16 m
Power: 1.1 kW
... CTV 25-11 PLASTIC CTV 25-11 is a 1" vertical pump in PP or PVDF with 1.1 kW motor, capacity of 15.6 m3/h and max head of 16 m. Performance curve The performance curves are based on water at 20°C. Other circumstances ...
Tapflo
Flow: 19, 34 m³/h
Head: 2 m
Power: 1.5, 2.2 kW
... CTV 40-12.5 STAINLESS CTV 40-12.5 is a 1 1/2" vertical pump in stainless steel AISI 316 with 1.5-2.2 kW motor, capacity of 34 m3/h and max head of 22 m. Performance curve The performance curves are based on water at ...
Tapflo
Flow: 14, 13 m³/h
Head: 11.5 m
Power: 0.48 kW
... has a smart design bottom plate that enables the pump to operate and drain down to 1 mm water level. The pump is equipped with a swing valve that prevents reverse flow from discharge hose when the pump ...
Tapflo
Flow: 5.3 m³/h - 2,900 m³/h
Head: 7.5 m - 105 m
... and corrosion conditions. Different product structures with horizontal double-casing pump, horizontal single-casing pump, and vertical single-casing pumps are available. There are ...
Flow: 11 m³/h - 400 m³/h
Head: 7.6 m - 50 m
... TZJL pumps are vertical type, the product is fixed above the slurry pool by the mounting plate, only the pump head is dipped in the slurry liquid, bearing and supporting parts are all above the pool, ...
Flow: 0 m³/min - 0.24 m³/min
Head: 0 m - 18 m
Power: 0.48, 0.75 kW
... pump is a submersible single-phase portable residue drainage pump. The specially designed bottom plate enables the pump to drain down to 1mm water level. It has a swing check valve that prevents reverse-flow ...
TSURUMI MANUFACTURING CO., LTD.
Flow: 0 m³/min - 0.13 m³/min
Head: 0 m - 12 m
Power: 0.4 kW
... surface from scratching. Though the pump is a single-phase unit, it has the durability equivalent to three-phase drainage pumps as the wear parts are made of abrasion-resistant materials. The pump adopts ...
TSURUMI MANUFACTURING CO., LTD.
Flow: 0 m³/h - 240 m³/h
Head: 0 m - 300 m
Power: 0.37 kW - 15 kW
... is a vertical multistage centrifugal pump designed for handling freshwater. Since it is an in-line type, the pump occupies less installation space. The major wetted parts are made of 304 or 316 stainless ...
TSURUMI MANUFACTURING CO., LTD.
Flow: 6.96 m³/h - 19.08 m³/h
Pressure: 18 MPa - 70 MPa
Power: 90 kW - 255 kW
... The overall independent research and development, medium and low pressure and large flow, plunger stroke valve group vertical conical structure, power end matching multi-speed ratio, large crankshaft thrust, wide range of applications ...
Flow: 24 m³/h
Head: 336 m
Power: 0.37 kW - 7.5 kW
... very robust and reliable 4 “submersible electric pumps and 4” submersible motors suitable for operating both in vertical and horizontal position. Built-in stainless steel check valve to protect the pump ...
STAC S.r.l.
Flow: 0 l/min - 2,000 l/min
Head: 0 m - 320 m
Power: 0.37 kW - 45 kW
... Professional, in-line, vertical multistage pumps, with all parts in contact with water in stainless steel Aisi 304 (316 on request), suitable for various applications mostly in industrial and building sectors (boiler ...
STAC S.r.l.
Flow: 0 l/min - 140 l/min
Head: 0 m - 90 m
Power: 0.45 kW - 1.5 kW
... operate in vertical or horizontal position. Internal PSC class B capacitor. The particularity of this pump is that the float switch is supplied separately on request and may be inserted or removed in relation with the ...
STAC S.r.l.
Flow: 2 us gal/min - 1,200 us gal/min
... wheels to break and hamper pump removal Special rugged duty pump materials, not standard duty water supply type Vertical and horizontal applications Achieves 2 to 1200 gallons per minute ...
QED Environmental
Flow: max 560.0 m³/h
Pressure: 0 bar - 12 bar
... Thanks to the vertical construction form, the WANGEN KL-T / KB-T has only a small space requirement. The consistent diameter of the joint connections ensures constant flow speeds and reduces the sensitivity to foreign ...
Flow: 0 us gal/min - 20 us gal/min
... Alemite Stationary RAM Pumps deliver fast, quiet and efficient operation, and are rugged enough to handle challenging oil applications. RAM pumps are durable, and can operate at rates up to 20 gallons per minute. FEATURES: ...
Flow: 0 m³/h - 350 m³/h
Pressure: 0 psi - 725 psi
Head: 0 m - 160 m
... Vertical heavy duty process in-line pump according to API 610 Vertical inline overhung single stage process pumpwith bearing frame Design requirements according to API 610 OH3 Seal chamber ...
Johnson Pump
Flow: 4.5 m³/h
Power: 250 W
Fluid temperature: 110 °C
... The J15 allows entry into the low flow vertical filter range. Available in polypropylene and PVDF, filtration is on a 10" QUALITHERM™ heat-welded cartridge. This economical filtration media can filter from 0.2 to 100 µm. Excellent ...
Siebec
Flow: 0 l/h - 2,400 l/h
Pressure: 0 Pa - 400,000 Pa
Fluid temperature: 5 °C - 100 °C
... wafer processing we offer with the FA-2E a lateral type for low flow rates equipped with a spray system. With the FA-40VEW, a vertical type for high flow rates, wafer up to 200 / 300 mm can be cleaned. Excellent resistance against ...
Flow: 150 m³/h - 11,000 m³/h
Head: 5 m - 40 m
... Nijhuis mixed flow pumps function as a compromise between radial and axial flow pumps. They operate at higher pressures than axial flow pumps while delivering higher capacities than radial flow pumps. ...
Fairbanks Nijhuis
Flow: 0 us gal/min - 5 us gal/min
Pressure: 7 bar
Head: 70 m
... air-operated double-diaphragm (AODD) pump is engineered with original equipment manufacturers (OEMs) in mind and provides tremendous system flexibility. The PB ¼" is one of the quietest and most flexible AODD pumps ...
Flow: 0.038 l/min
Pressure: 0.2 MPa
Weight: 0.5 kg
... dust-proof rating of IP65. • This pump is not completely water resistant. Protect the pump with a cover when installing it out of doors. 1 – 5V control type The input of 1 – 5V proportionally controls the ...
Length: 400 mm - 2,100 mm
Width: 400 mm - 1,800 mm
Height: 260 mm - 1,500 mm
... separates the substance mixture. The bellows pulsator is the perfect system for generating this oscillating liquid movement in a vertical vessel. Movement in almost total harmony The pulsation characteristic exerted by the bellows on ...
Flow: 400 l/s
Head: 250 m
Power: 400 kW
... Vertical lineshaft pumps with submerged pump bowl, lineshaft and drive unit on the surface, for installation in deep wells or tanks. Featuring an extremely solid and reliable construction design, they ...
Caprari
Flow: 1.5 l/h
Pressure: 1.5 bar
Power: 15 W
... FPM) Foot filter (PP/FPM) 2m suction & 2m discharge tubing Mounting Bracket, to install the pump indifferently on a wall ( vertical) or on a tank (horizontal) ...
Flow: 250 us gal/min - 5,000 us gal/min
Pressure: 40 psi - 490 psi
... Key Features UL Listed/FM Approved/NFPA-20 Design For Commercial, Industrial and Marine Use Electric Driven Available Lower Initial Cost Ease of Maintenance ...
Aurora Pump
the best suppliers