Vertical-mount pumps

Flow: 80 m³/h
Pressure: 15 bar
Output diameter: 53 mm

The FLUX progressive cavity pump VISCOPOWER F 570 - Industry with planetary gear is suitable to pump thin to medium viscous media. The positive displacement pump works smoothly at a constant ...

Flow: 0 l/min - 80 l/min
Pressure: 0 bar - 15 bar
Output diameter: 53 mm

The FLUX progressive cavity pump VISCOPOWER F 580 - Industry with bearing flange is suitable to pump thin to highly viscous media. The positive displacement pump works ...

Flow: 17 l/min - 47 l/min
Head: 6.8 m

The small drum pump JUNIORFLUX F 310 with fixed commutator motor and mechanical seal is especially suitable for pumping comparatively small quantities out of containers ...

Flow: 0 l/min - 12 l/min
Pressure: 6 bar
Fluid temperature: 100 °C

The B70V SanitaryPlus food pump is a powerful positive displacement pump for heavy-sensitive, viscous and viscous media up to the limits of flowability. It pumps liquid foodstuffs, ...

Flow: 0 l/min - 12 l/min
Pressure: 8 bar
Fluid temperature: 100 °C

The B70V SanitaryPlus food pump is a powerful positive displacement pump for heavy-sensitive, viscous media with and without fiber or solids content up to the limits of flowability. It pumps ...

Flow: 0 l/min - 50 l/min
Fluid temperature: 100 °C
Input diameter: 54 mm

The B70V SanitaryPlus food pump is a powerful positive displacement pump for heavy-sensitive, viscous media with and without fiber or solids content up to the limits of flowability. It pumps ...

Flow: 2,000 l/min
Pressure: 10 bar

... Horizontal or vertical mounting - Easy to disassemble and reassemble - 316L stainless steel pump body and cover - Versatile 4-way mounting of gear case, including vertical ...

Flow: 0.06 l/min - 1 l/min
Pressure: 0 bar - 60 bar

GFZ-B..-D Gear pump Medium: oil Drive: electric Dosing volume in l/min: 0,06...1,0 max. delivery pressure in bar: 60 Type: vertical

Flow: 2.8 l/min - 38.3 l/min
Pressure: 0 bar - 185 bar

GFZ-L Gear pump Medium: oil Drive: electric Dosing volume in l/min: 2,8...38,3 max. delivery pressure in bar: 185 Type: vertical

Flow: 0.8 l/min - 13.1 l/min
Pressure: 0 bar - 240 bar

GFZ-N Gear pump Medium: oil Drive: electric Dosing volume in l/min: 0,8...13,1 max. delivery pressure in bar: 240 Type: vertical

Flow: 0.01 l/min
Pressure: 38 bar

The ECP is designed to lubricate bearings and linear guides with oil or fluid grease. The pump works reliably in single-line systems of up to 20 lubrication points and a main line length of approximately 15 meters. It ...

Flow: 8, 14, 24 l/min
Pressure: 0 bar - 400 bar
Head: 120 m

The ZPU 08/14/24 pumps are used primarily in dual-line systems or as supply pumps and have a maximum operating pressure of 400 bar (5800 psi). Depending on the system layout, these electric pumps ...

Flow: 0.00008 l/min - 0.0042 l/min
Pressure: 0 bar - 350 bar

... optimum adjustability. The pump’s drive and eccentric shaft design, high-efficiency worm gear, minimal number of parts and multi-range motor provide several advantages. P 205 pumps are available with ...

Flow: 6 m³/h
Head: 8 m
Fluid temperature: -20 °C - 90 °C

Vertical centrifugal pumps Inlet connections: 1” 1/2 F Outlet connections: 1” M Max. Delivery head: 8 mts Max Viscosity: 100 cps Impeller: Semi-opened

Flow: 0 m³/h - 10 m³/h
Head: 0 m - 10 m
Power: 1.1, 0.75, 0.55 kW

Vertical centrifugal pumps Inlet connections: 1” 1/2 F Outlet connections: 1” M Max Viscosity: 150 cps Impeller: Semi-opened

Flow: 0 m³/h - 15 m³/h
Head: 0 m - 12 m
Power: 1.5, 0.75, 1.1 kW

Vertical centrifugal pumps Inlet connections: 1” 1/2 F Outlet connections: 1” M Max Viscosity: 200 cps Impeller: Semi-opened

Pressure: 10, 30 bar

ViscoTec dispenser 3VMP18, as a volumetric dispensing pump for larger volumes, ensures smooth and reliable product supplying of abrasive, high-filled or shear sensitive material - with a repeatability of +/- 1 %! Absolutely ...

Flow: 0.033 l/min - 66.4 l/min
Pressure: 1 bar - 20 bar

ViscoTec dosing and filling pump type RD-hygienic for food and cosmetics is a volumetric conveying pump based on the endless piston principle. Suitable for discontinuous or continuous pulsation-free metering ...

Flow: 48, 40 m³/h
Pressure: 16 bar
Head: 135 m

Two-stage vertical centrifugal pump The pump is a two-stage vertical centrifugal pump equipped with stainless steel shaft, mechanical shaft seal, ...

Flow: 2,000, 2,400 m³/h
Pressure: 25 bar
Head: 195 m

... Applications Within the marine industry the pumps are suitable as: • Fresh and seawater cooling pumps • Bilge and ballast pumps • Fire-fighting • General service pumps • ...

Flow: 0 m³/h - 7,400 m³/h
Pressure: 25 bar
Head: 140 m

The in-line DSL double suction centrifugal pump Up to 5400 m³/h (23800 US gpm) The DSL pumps are single-stage, double-suction, vertical, centrifugal pumps. The design ...

Flow: 0 m³/h - 6 m³/h
Head: 0 m - 7.5 m
Power: 0.37 kW

... according to the length of the pump Customisable fixing plate only at the design stage Accessories FLANGE KIT (DIN standard – ANSI available on request) – KITFLANGIM080P (PP pump) ...

Flow: 0 m³/h - 9 m³/h
Head: 0 m - 10.5 m
Power: 0.55 kW

... dimensions and weights vary according to the length of the pump Accessories FLANGE KIT (DIN standard – ANSI available on request) – KITFLANGIM090P (PP pump) – KITFLANGIM090F ...

Flow: 0 m³/h - 13 m³/h
Head: 0 m - 12 m
Power: 0.75 kW

... and weights vary according to the length of the pump Accessories FLANGE KIT (DIN standard – ANSI available on request) – KITFLANGIM095P (PP pump) – KITFLANGIM095F (PVDF ...

Flow: 250 m³/h
Pressure: 10 bar
Head: 60 m

The heavy-duty type TPC-M vertical cantilever pump without bottom bearing is designed with run-dry capabilities to pump solids-carrying acids, alkalis and chemically contaminated effluents ...

Flow: 600 m³/h
Pressure: 10 bar
Head: 65 m

The heavy-duty type TPC vertical cantilever pump without bottom bearing is designed with run-dry capabilities to pump solids-carrying acids, alkalis and chemically contaminated effluents ...

Flow: 2 m³/h - 700 m³/h
Pressure: 10 bar
Head: 90 m

... configurable TNP-KL vertical centrifugal pump Focus on flexibility: The MUNSCH TNP-KL vertical chemical pump series covers a wide capacity range of 2 to 700 m3/h. All-plastic ...

Flow: 4.5 m³/h
Power: 250 W
Fluid temperature: 80, 110 °C

The J15 allows entry into the low flow vertical filter range. Available in polypropylene and PVDF, filtration is on a 10" QUALITHERM™ heat-welded cartridge. This economical filtration media can filter from 0.2 to 100 ...

Flow: 25 m³/h
Fluid temperature: 110, 80 °C
Width: 473 mm

This medium flow vertical filter offers a maximum flow rate of 25 m³/h. It can be mounted underwater or above ground to save space in the tank. Excellent chemical compatibility Like most plastic filters, the J SERIES ...

Flow: 5 m³/h - 25 m³/h
Power: 1,100 W
Fluid temperature: 110, 80 °C

This medium flow vertical filter offers a maximum flow rate of 25 m³/h. It can be mounted underwater or above ground to save space in the tank. Excellent chemical resistance Available in polypropylene or PVDF, this ...

Flow: 0 m³/h - 350 m³/h
Pressure: 0 psi - 725 psi
Head: 0 m - 160 m

Vertical heavy duty process in-line pump according to API 610 Vertical inline overhung single stage process pumpwith bearing frame Design requirements according to API 610 ...

Flow: 0 m³/h - 850 m³/h
Pressure: 0 bar - 10 bar
Head: 0 m - 105 m

Close-coupled horizontal centrifugal pump to EN 733 (DIN 24255) Compact, economic, space saving construction Low viscosity, clean or slightly contaminated and aggressive liquids No shaft alignment required ...

Flow: 0 m³/h - 850 m³/h
Pressure: 0 bar - 10 bar
Head: 0 m - 105 m

Close-coupled horizontal centrifugal pump to EN 733 (DIN 24255) Compact, economic, space saving construction No shaft alignment required Outstanding hydraulic performance High efficiency impeller ...

Flow: 0 m³/h - 110 m³/h
Head: 0 m - 394 m
Power: 0 kW - 55 kW

... , multi-stage vertical pumps, suitable for lifting plants with or without autoclave, irrigation and washing systems and all other applications where high pressure is required. These pumps ...

Flow: 0 m³/h - 18 m³/h
Head: 0 m - 113 m
Power: 0 kW - 4 kW

One pump for three different solutions: MBSH- version with suction base, multi-stage pump; MBS-L- booster pump, MBS -submersible pump. Applications: water supply from ...

Flow: 110 m³/h
Head: 0 m - 385 m
Power: 55 kW

... , multi-stage vertical pumps, suitable for lifting plants with or without autoclave, irrigation and washing systems and all other applications where high pressure is required. These pumps ...

Length: 400 mm - 2,100 mm
Width: 400 mm - 1,800 mm
Height: 260 mm - 1,500 mm

... separates the substance mixture. The bellows pulsator is the perfect system for generating this oscillating liquid movement in a vertical vessel. Movement in almost total harmony The pulsation characteristic exerted ...

Flow: 0 m³/min - 0.24 m³/min
Head: 0 m - 18 m
Power: 0.48, 0.75 kW

... LSC pump is a submersible single-phase portable residue drainage pump. The specially designed bottom plate enables the pump to drain down to 1mm water level. It has a swing check valve ...

Flow: 0 m³/min - 0.13 m³/min
Head: 0 m - 12 m
Power: 0.4 kW

... surface from scratching. Though the pump is a single-phase unit, it has the durability equivalent to three-phase drainage pumps as the wear parts are made of abrasion-resistant materials. The pump ...

Flow: 0 m³/h - 240 m³/h
Head: 0 m - 300 m
Power: 0.37 kW - 15 kW

The TVM-series is a vertical multistage centrifugal pump designed for handling freshwater. Since it is an in-line type, the pump occupies less installation space. The major wetted parts ...

Flow: 0 m³/h - 350 m³/h
Pressure: 0 bar - 6 bar
Weight: 220 kg - 780 kg

... plants. The inline housing design allows you to install it in pipeline systems to protect the following equipment, such as your pumps. Despite the pipeline installation, the macerator offers you the proven FSIP® concept ...

Flow: 34 l/h - 348 l/h
Pressure: 1 bar - 4 bar
Power: 0.18 kW - 0.25 kW

... PERISTALTIC TUBE PUMP - ALBIN PUMP Specifications: Flow rate: up to 348 l/h (92 gph) Discharge pressure: up to 4 bar (60 psi) Maximum suction lift: - 9,8 m Hoses: Polyamide reinforced, NR, ...

Flow: 91 l/h - 910 l/h
Pressure: 1 bar - 4 bar
Power: 0.18 kW - 0.25 kW

... PERISTALTIC TUBE PUMP - ALBIN PUMP Specifications: Flow rate: up to 910 l/h (240 gph) Discharge pressure: up to 4 bar (60 psi) Maximum suction lift: - 9,8 m Hoses: Polyamide reinforced, NR, ...

Flow: 0.3 m³/h - 2.71 m³/h
Pressure: 1 bar - 4 bar
Power: 0.55 kW

... PERISTALTIC TUBE PUMP - ALBIN PUMP Specifications: Flow rate: up to 2,71 m3/h (12 gpm) Discharge pressure: up to 4 bar (60 psi) Maximum suction lift: - 9,8 m Hoses: Polyamide reinforced, NR, EPDM, ...

Flow: 1.8 m³/h - 150 m³/h
Pressure: 150 psi - 500 psi
Fluid temperature: 82, 149 °C

... and free draining vertical ports. This highly robust pump can run at pressures of up to 500 psi. Key Features & Benefits CIP capability available. Pump body has optional internal ...

Flow: 1.1 m³/h - 102 m³/h
Pressure: 10.3, 15.5, 13.8 bar
Fluid temperature: -40 °C - 149 °C

PUMPS / POSITIVE DISPLACEMENT PUMPS Tru-Fit models are available for U1, U2, Lobe and Twin Screw (UTS) positive displacement pumps. Tru-Fit pump model advantages include: ...

Flow: 1.3 m³/h - 102 m³/h
Pressure: 13.8, 10.3 bar
Fluid temperature: -40 °C - 149 °C

PUMPS / POSITIVE DISPLACEMENT PUMPS The durable Waukesha Clean-out-of-Place (COP) Positive Displacement "Can-Do Pump". Versatile in application, its reliability has made it the industry ...

Flow: 0 us gal/min - 4,500 us gal/min
Pressure: 0 psi - 1,500 psi
Fluid temperature: 14 °F - 230 °F

... changing pump arrangement to match the width of the TSF opening to the drop zone • Concentric rotation in a close tolerance pressure tube allows the TSF to generate positive stuffing pressure to the pump ...

Flow: 0 m³/h - 225 m³/h
Pressure: 0 bar - 9 bar

As an extension to the standard Epsilon range, a vertical pump is available in various materials, including stainless steel or super duplex steels. This competitively priced high pressure pump ...

Flow: 900 l/min
Head: 12, 27, 40 m
Power: 5 kW - 12.6 kW

Immersion Pumps are plain centrifugal pumps with the impeller fitted on the driving shaft extension. They are mounted on top of the container, the pump extension being immersed in the ...

Flow: 0 l/min - 870 l/min
Head: 0 m - 62 m
Power: 3.3 kW - 10.3 kW

Horizontal End-Suction Pumps are centrifugal inline pumps with a compact design where the impeller is mounted onto the extended motor shaft. These pumps are not ...

Flow: 16.2 l/min - 47.4 l/min
Pressure: 10 bar - 200 bar
Power: 0.7 kW - 12.5 kW

Screw spindle pumps with their silicon carbide spindle housing and highly wear resistant spindles are capable of achieving extremely high pressures. Brinkmann high pressure screw pumps are designed for ...