... reliable, easy to use online colorimetric water analyzer family provides accurate analysis, real-time data and continuous monitoring for municipal drinking water and wastewater applications. ...
In-Situ
... It is easy to be deployed in groundwater and surface water to monitor multiple parameters such as level, conductivity, salinity, TDS, resistivity, density, temperature....etc. With robust IP68 water submersible enclosure, ...
Aquas Incorporation
... The MIC-600 laser analyzer adopts the principle of Tunable Diode Laser Absorption Spectroscopy (TDLAS), which is the \"single-line spectrum\" measurement technology. Using a high-stability, low-noise quantum cascade QCL tunable laser ...
... Free residual chlorine analyser series M 1035 C is designed for measurement and control of drinking water, wastewater treatment and swimming-pool applications. Two basic measured parameters are free ...
Controlmatik
... NO RE-ZERO; NO DRIFT The zero information is contained in the signal, enabling automated and intrinsic re-zero of the analyzer. EASE-OF-USE The ProCeas is pre-calibrated for your application. Ini-tially packaged in a standard ...
AP2E
... Dissolved Gas Analyzer GC For measuring gases dissolved in water, seawater, wastewater, oil, and other liquids. HID, FID and/or TCD Detectors Built-in PeakSimple data system Built-in Standards Preparation Module—make ...
... combination with a proprietary semipermeable diffusion membrane to measure trace moisture as parts per million by volume (ppmv) water vapor or dew/frost point in dry inert gases. The PPM1 is modular and may be mounted remotely. It is ...
... . Research Institute and Universities . Advanced 32 bits embedded MCU technology . SMT and integrative design . ABS waterproof enclosure . Membrance touch keys . CPU intelligent design . LCD display . User interface language:English . ...
HKY Technology CO.,ltd.
... Multi-component analyzer No interference from background gases In-situ measurement LaserGas™ iQ2 analyzer is the first to measure up to four gases (O2, CO, CH4, H2O) and temperature depending on configuration, which ...
NEO Monitors
... process water With O2 – Control the residual oxygen content of process water in the range of 0.001 mg/l to 0.5 mg/l can be monitored continuously. In a bypass procedure the compact wall unit takes minimal water ...
... The Hydrotec™ 8000 is ideal for the busy laboratory requiring high throughput of samples. It is an innovative fully automated system that performs automated acid hydrolysis without sample transfer. It has a small footprint and unique batch-handling features. Value Fully ...
Foss Analytical
... Rugged, accurate, reliable – best value for an IP67-rated waterproof meter! Intuitive, user-friendly icons—probe status displays cell constant Grip-Clip™ holder quickly and easily secures the probe to your beaker or container Expanded ...
... MEASUREMENT, ANALYSIS, ONLINE MONITORING The LetzTOC measuring device was developed by us in-house for monitoring pharmaceutical water. It allows the total organic carbon content in a sample to be determined. LetzTOC complies with ...
... The miniTOC instrument uses the classical flow-through concept for online or offline TOC monitoring of pure and ultra pure water.The efficient UV oxidation of organic compounds by the “direct surface” principle in combination with conductivity ...
MembraPure
... analysis device for monitoring soft water for operation without constant supervision for safe operation during 72 hours (BOB 72 hours). The additional relay contacts make it possible to control an external cooling water ...
RLS Wacon analytics GmbH
C5010 is the most basic, yet complete and accurate portable meter in our portfolio. It can measure all common electrochemical parameters such as pH, ORP, Conductivity and Dissolved Oxygen. This makes the C5010 an all-round instrument. C5020 adds a larger ...
CONSORT
... The Fieldpaq II™ Series manufactured by BENSTONE is a 2+2 Channel Dynamic Signal Analyzer. It is equipped with a large 5-inch TFT color touch screen that has a high resolution of 800 x 480 which provides a clear view on the data of the ...
... Complete and flexible system for a wide range of applications in water treatment with easy to use software and automatic recognition of sensors: available in two configurations, with up to two (2) and up to four (4) simultaneous measurements, ...
... The 7000 water vapor analyzer range utilises the sensitive and stable P2O5 sensor for absolute moisture measurement. These water vapor analyzers offer a wide measurement range of 0.002-1000 ...
Systech Illinois
... -cost, proven colorimetric DPD chemistry User-selectable cycle times Microprocessor-based technology Ballast water, drinking water & wastewater applications 4-20mA and RS-485 with Modbus output USEPA ...
HF scientific
... DIRECT Direct measurement means delivering the right answer, no matter what; changes in color, additives, temperature, or granularity do not alter the results. Because the moisture and fat are being measured directly, costly maintenance calibrations ...
... and insulated sample bath avoids hot surfaces and reduces risk of inadvertent burns. Overflow direct into waste eliminates hot water spillage. Optional small and efficient cooling unit. ...
FOSS
... sharing technique) The analyser samples dry biogas, pressurized or low pressure gas and can be used for single or dual point sampling of: Cogeneration heat and power engines (CHP) Municipal or industrial waste water ...
MRU – Messgeräte für Rauchgase und Umweltschutz
... The Silt Density Index (SDI) measures the time it takes to filter a fixed volume of water through a standard 0.45 µm microfiltration membrane with a constant given pressure of 2.07 bar (30 psi). The difference between the initial time ...
... Series of On-line Titrimetric Analyzers The TitriLyzer® Series of On-line Titrimetric Analyzers are state of the art titration systems that are used for various water analysis applications. AppliTek ...
APPLITEK
... The Nova 910 Series analyzers have been designed for monitoring recovered and processed gases from landfill sites. This equipment continuously removes moisture from the wet sample gas without the need for cooling water, ...
... individual compound: • CO ppm V GfX infrared gas analyzer • CO2 ppm v GfX infrared gas analyzer • O2 Vol% Pm paramagnetic gas analyzer (with atmospheric pressure compensation) • H2O ppm V P2O5 trace ...
... Multi Parameter Analyzer Vasthi Instruments are global leaders in manufacturing of Multi Parameter Analyzer and have been supplying instruments to customers worldwide, Our multidisciplinary team of scientists, physicians, ...
vasthi instruments
... DPI-01 portable laser micro- water meter developed by our company is a portable instrument based on laser absorption spectroscopy to detect the micro- water content in the gas. Designed dy using the characteristic of the ...
... Analyser The treatment of water utilized in a power is critical for reducing boiler failures. As boilers generate steam or water is evaporated by a cooling tower, dissolved minerals accumulate and ...
Steam Equipments
... field On-line monitoring of industrial pollution source wastewater On-line monitoring of industrial process water On-line monitoring of import and export water quality of municipal sewage treatment ...
Jiangsu Flowna Intelligent Technology Co. Ltd
... monitoring device for water hardness and the further development of the Testomat® F-BOB. Application reverse osmosis plants soft water for commercial purposes pure water production plants ...
Gebrüder Heyl Analysentechnik
... Instrument simplicity. Intuitive controls allow for immediate operation. Analyzing water on offshore oil rigs On-site oil in water analysis Monitoring of oil & water separation systems TPH in soil ...
... Common measures: PH. CE, CC, CD Dissolved oxygen Sodium. Silica. Phosphate. Hydrazine Chlorine. TOC. Oil in water. Water in oil. Etc. ...
... the only portable device on the market which can see the water Raman line using a 1064 nm laser owing to its record wide spectral range. This makes it a comprehensive tool for analysis of liquids through transparent and ...
... The Aqua-CP/A is a waterproof, all-in-one meter for Conductivity, TDS, pH and Temperature. It features multiple Conductivity and TDS ranges, making it suitable for a wide variety of lab and field applications. The ranges are automatically selected to ...
TPS
... range: 0 – 1500 mg/l High range: 0 – 15000 mg/l Description Waste water parameter COD The chemical oxygen demand, ST-COD value (ST = small scale sealed tube), of water as determined by this dichromate method ...
AQUALYTIC
... The Laboratory Charge Analyzer (LCA) is an essential coagulation optimization tool for the water treatment professional. The LCA allows the user to determine the ideal coagulant dosage needed to achieve optimum NTU and ...
Chemtrac
... relative saturation (RS), as well as temperature. It provides continuous, reliable measurement of the water content of electrical insulating liquids and other types of oils. Determining the moisture ...
... applications Water industry Monitoring of drinking water quality in pumping stations Filter monitoring Process control in water treatment Monitoring of limit values Demineralisation Monitoring ...
the best suppliers