Removal rating: 10 µm - 5,000 µm
... Mesh openings 25-10000 microns Synthetic mesh openings 10-5000 microns Filtration woven wire mesh and sintered filter elements Material of filtration mesh types same as in screen elements ...
Removal rating: 0.02 µm - 0.1 µm
... of small disposable type filters is made of Polyethylene and Polypropylene that enhances its chemical resistance. It has a hollow fiber membrane filter of KMF that has an olefin resin finish on its materials. This membrane ...
KITZ MICRO FILTER CORPORATION
... allowing the filter to be crushable and incinerable for disposal. The unique combination of media employed provides the industry with one of the most efficient particulate and water removal filters available. ...
... PP-yarn, coiled progressively onto a PP-core Working temperature:to +60 °C Colour:white Application:to filter drinking water, alkaline solutions- and acids Diameter:64 mm Length:254 mm Packaging ...
... category “M” Multi-layered media for increased solids holding capacity Ultra-fine solids removal Maximum water coalescence Balanced cartridge flow characteristics ...
Facet International
Removal rating: 0.5 µm - 100 µm
... cooling tower water filtration. – Filtration of feed water and protection of RO and UF membranes. – UV prefiltration to increase effectiveness of UV light. – Potable Water filtration – ...
Siga Filtration
Removal rating: 0.5 µm - 100 µm
Flow rate: 6 m³/h
... The DutchFlow Filter Cartridge is designed and engineered for high accuracy final polishing filtration of all type’s of fluids. The specially selected polypropylene or borosilicate glass fibre material ...
Removal rating: 0.2 µm - 1 µm
Flow rate: 1,000 l/h - 2,500 l/h
... Hydrophilic PVDF membrane filter element with high resistance to thermal treatment used typically in soft drinks, water, wine, cider and raw beer applications, remove undesire contaminants keeping the original characteristic ...
BEA Technologies S.p.A.
Removal rating: 1 µm - 75 µm
... An economical, melt blown filter element that can be used in a wide range of applications. The Crystal MBF depth filter is constructed of 100% polypropylene media for chemical compatibility with a variety of process ...
Graver Technologies
Removal rating: 1 µm - 1,000 µm
... Filter Element : Star Pleated Filter Elements, Design : Out to In (Standard) Design : Star Pleated-Reusable/Disposable Type : H-XL, H-XP, G, VS, AS Media : Glass Fibre, Paper, Wire Mesh, Non-Woven, Water-Absorbing ...
Removal rating: 1 µm - 50 µm
... highly efficient filtering with minimal load loss. Fluytec spun filter cartridges are made with 100% polypropylene thread and provide a large contact surface for minimum pressure drop, ...
Fluytec Filtration Technologies, S.A
... The water absorbent media from Filtrec is ideal for eliminating contaminants from water in a wide variety of applications that involve hydraulic systems, synthetic oil and minerals. This absorbent media is connected to ...
FILTREC S.p.A.
Removal rating: 0.2 µm - 20 µm
... by Wolftechnik, is a pleated polypropylene filter cartridge designed specifically for liquid filtration. It offers users a large filter area from pleated filter materials. ...
Wolftechnik Filtersysteme GmbH & Co. KG
Removal rating: 0.1 µm - 30 µm
... wet processing applications and filtration of high purity water. The polypropylene hardware construction of Mega-Flow series can be apply to many process fluids to ensure wide chemical compatibility. The compact cartridge ...
Filtrafine
Removal rating: 5 µm
... Diameter70 mm Efficiency85% Element Length254 mm Degree of filtration5 µm Material(s)PAC impregnated cellulose Working Temperature4°C - 52°C ...
Removal rating: 0.5 µm - 150 µm
... Wound filters feature a graded density construction, enabling progressively smaller particles to be captured through the depth of the filter media. The result is a high dirt holding capacity filter which ...
Allied Filter Systems Ltd
... Cartridge filters are used to remove small solid particles from gases and liquids. Filtration grades from 1 micron (0.001 mm) and 99.9% removal efficiency. Custom designs according to requirements ...
... sterilizing filters Pore sizes range from 0.10 to 0.65 micron Validation BNM filters are validated using test procedures that comply with ASTM F 838-15(ae1) protocols for the determination of bacterial retention ...
Critical Process Filtration
Removal rating: 0.05 µm - 200 µm
Flow rate: 420 m³/h
... The Static Filter is suitable for the filter process of various viscous components such as chemicals, petrochemicals, food and beverage. The unit can also be utilized in water treatment, mining, and cement ...
Removal rating: 0.5 µm
... processes or experimental water in the laboratory, the Customized 0.5μm Titanium Rod Filter Cartridge Special Interface ensures the purity and safety of the water source. The Customized ...
Baoji Yinggao Metal Materials Co., Ltd.
... determines filtration rate. It is supported and protected upstream and downstream by layers of coarser mesh. These elements work well in applications with high pollution loads and as a pre- filter upstream ...
Removal rating: 0.1 µm - 20 µm
... PP pleated filter cartridge is made of multi-layer PP microfiber. With gradient pore size and high strength support, the filter cartridge has high retention efficiency and high flow ...
Membrane Solutions LLC
Removal rating: 0.1 µm - 3 µm
... LPSHT filter cartridges are integrity testable membrane filters specially developed for sterilizing filtration of vaccines. They are characterized by a unique highly asymmetric, hydrophilic ...
ANOW Microfiltration
... Multiple layers of diffusion-bonded wire cloth are pleated to maximize filter area and on-stream life. Poromesh media capture contaminants on the upstream surface of the filter element, where it is easily cleaned or back-flushed. ...
Purolator
... These cartridges are ideal for treating slightly refined waters with a good presence of suspended solids (up to a maximum of 1 ppm) with an heterogeneous distribution of the particles. Everblue's filtering ...
... where high viscosity fluids limit the use of the cellulose elements. Water Sorb Filter Inserts RMF Systems offers a specially designed Water Sorb combination filter element: water ...
... Cryptofil™ filter cartridges are utilised for the control of Cryptosporidium oocysts in the water used in the food, beverage and ultrapure water industries. The Cryptofil™ cartridge ...
Porvair
... reg; NMB Cartridge Filter Sub 32 nm node CMP slurry filtration with leading edge of "Nanofiber Continuous Melt-blown" technology Various retention ratings Nanofiber CMB technology Optimized ...
Entegris
Removal rating: 5 µm - 1,000 µm
... steel mesh filter cartridge is made of 304 or 316 stainless steel woven mesh. The surface is usually cylindrical or with a support plate. It is manufactured by welding or crimping. It can be assembled without the use ...
Henan Sinofiltec Technology Co.,Ltd
... METAL MESH CARTRIDGES FOR PROCESS FILTRATION. IFS designs filter elements in pleated metal mesh in single layer or in multiple layers customized with specific filter media for the treatment of particles. The ...
Flow rate: 35, 70, 105 us gal/min
... technology to provide a superior cartridge filter housing that is the best choice for a wide variety of uses. The HCFC Series of FRP filter housings contains 7 filter cartridge ...
Hydrodex
... Separation of oil and sand Fuel and hydraulic oil filtration Dust removal in high temperature gas Filtration in Food industry Filtration in pharmaceutical industry Filtration in ...
Removal rating: 0.5 µm - 100 µm
... scientific design, the filter has a good structure which has high dirt holding capacity, and resuit in long service life. • - 100% PP material makes the filter cartridge got excellent Chemical compatibility. ...
SuZhou KoSa Environmental Protection CO.,LTD
... Filter cartridges for automatic backwash During the filter cycle the solids are deposited on the smooth surface of the filter element. A “cake” is built up and acts as an extra filter ...
Removal rating: 1 µm - 75 µm
Flow rate: 10 l/min - 90 l/min
... t -Depth filter elements are available in three different versions. All filter elements are made from 100% polypropylene microfibers. The packing density of these elements increases from the outside to the inside, so ...
Voigt GmbH
... total organic carbon. We offer high-flow, low-pressure, and selective-rejection nanofiltration membranes that easily handle water softening and organics removal. And with more than 50 different types of TFC membranes in our product catalogue, ...
Koch Membrane Systems
Removal rating: 150 µm
... FILTER CARTRIDGES (optional) Material Transparent SAN bowl, filled polypropylene head, brass threaded inserts. Application Filtration system to be installed downstream of a rainwater harvesting and ...
Removal rating: 0.03 µm - 10 µm
... Overview
Pleated
filter
cartridges using FUJIFILM's AstroPore membrane technology.
Cartridge type designed for a wide variety of industries including food & beverage and electronics. AstroPore ...
... Product Overview
Capsule
filters provide a ready-to-use
filtration solution for
water, buffer solutions and reagents across multiple industrial processes. The pleated internal
filter ...
Removal rating: 0.075 mm - 0.6 mm
... VEH filters with plastic body are a rational and economic solution for most operating environments. The threaded coupling between bowl and head allows a quick filter cleaning and easy replacement of the cartridge ...
the best suppliers