Ethernet transceiver ADIN1110 series

10BASE-T1L IEEE Standard 802.3cg-2019 compliant Integrated MAC with SPI interface SPI supporting 10 Mbps full duplex Supports OPEN Alliance 10BASE-T1x MAC-PHY serial interface Low power consumption: dual supply 42 mW typical Supports 1.0 V p-p and 2.4 V p-p transmit levels Autonegotiation capability Supports intrinsic safety applications External termination resistors Separate receive and transmit pins MDIO memory map accessible via SPI On Chip FIFOs: 20kB receive, 8kB transmit (configurable) Cut-through or Store and forward operation Rx high and low priority queues IEEE 1588 timestamp support Statistics counters 16 MAC addresses supported for frame filtering Link LED Unmanaged configuration using pin strapping including: Master/Slave selection Transmit amplitude 25 MHz crystal oscillator/25 MHz external clock input Single supply 1.8 V/3.3 V operation (mode dependent) Cable Reach 1700 meters with 1.0 V p-p 1700 meters with 2.4 V p-p EMC test standards IEC 61000-4-4 electrical fast transient (EFT) (±4 kV) IEC 61000-4-2 ESD (±4 kV contact discharge) IEC 61000-4-2 ESD (±8 kV air discharge) IEC 61000-4-6 conducted immunity (10V/m) IEC 61000-4-5 surge (±4kV) IEC 61000-4-3 radiated immunity (Class A) EN55032 radiated emissions (Class B) Small package 40-lead (6 mm × 6 mm) LFCSP Wide temperature range -40°C to 105°C The ADIN1110 is an ultra low power, single port, 10BASE-T1L transceiver design for industrial Ethernet applications and is com-pliant with the IEEE® 802.3cg-2019™ Ethernet standard for long reach, 10 Mbps single pair Ethernet (SPE).